# changelog

author: Erik van Pienbroek <info@nntpgrab.nl> - 0.3.1-3
changelog:
  - Changed license to GPLv3+ and added some comments
    regarding the license issues with this package


author: Debarshi Ray <rishi@fedoraproject.org> - 3.28.5-1
changelog:
  - Update to 3.28.5
  - Fix the libgovirt requirement
  - Revert to using Python 2 and Tracker 1.0
  - Resolves: #1567399


author: Zeeshan Ali <zeenix@redhat.com> - 3.8.3-11
changelog:
  - Don't hang on failure to handle a URL (related: #1046251).
  - Handle paths as well (related: #1046251).
  - Handle local paths to remote files (related: #1046251).


author: Zeeshan Ali <zeenix@redhat.com> - 3.8.3-10
changelog:
  - Set volume capacity in correct units (related: #1049316).
  - Refresh volume info after resize (related: #1049316).


author: Zeeshan Ali <zeenix@redhat.com> - 3.8.3-8
changelog:
  - Don't register for 'x-content/bootable-media' (related: #1072611).
  - Ignore CDROM devices (related: #1072611).
  - Ignore non-readable devices (related: #1043892)


author: Zeeshan Ali <zeenix@redhat.com> - 3.8.3-4
changelog:
  - Remove media from correct box (related: #846408).
  - Remove existing transition before adding new one (related: #1015079).


author: Christophe Fergeau <cfergeau@redhat.com> 3.8.2-4
changelog:
  - ... and remove again the ExclusiveArch on fedora. If libvirt-daemon-qemu
    is available, this means we can create (very slow) x86 boxes regardless
    of the arch


author: Christophe Fergeau <cfergeau@redhat.com> 3.8.2-3
changelog:
  - Readd ExclusiveArch as Boxes is not really functional on non-x86
    arch even if it can be built. Also, libvirt-daemon-kvm is not
    available on every arch, causing rhbz#962325


author: Christophe Fergeau <cfergeau@redhat.com> - 3.5.2-2
changelog:
  - enable logos after getting confirmation this has been approved by
    fedora-legal and the Fedora board


author: Christophe Fergeau <cfergeau@redhat.com> - 3.4.1-2
changelog:
  - Backport a few upstream patches:
    - asynchronously fetch domain information from libvirt, this makes Boxes
      much more responsive
    - make the file chooser dialog modal
    - fix f17 unattended installation


author: Christophe Fergeau <cfergeau@redhat.com> - 3.3.4-4
changelog:
  - call desktop-file-validate in %install. gnome-boxes upstream installs
    a .desktop file on its own so desktop-file-validate is enough, no need
    to call desktop-file-install.


author: Christophe Fergeau <cfergeau@redhat.com> - 3.3.3-2
changelog:
  - Use %{buildroot} instead of $RPM_BUILD_ROOT
  - Remove unneeded patch
  - Add missing dependency on fuseiso


author: Rob Crittenden <rcritten@redhat.com> - 0.78.4-12
changelog:
  - Add documentation for the '-N' option to the dogtag-ipa-renew-agent-submit
    man page (#1651368)
  - SCEP: Don't set message=<ca ident> with GetCaps and GetCACert (#1608781)
  - SCEP operation GetCAChain is not valid. Should be GetCACertChain (#1590727)
  - Document owner and permission parameters to getcert (#1549585)


author: Rob Crittenden <rcritten@redhat.com> - 0.78.4-9
changelog:
  - Remove patch to pass _PROXY, _proxy, LANG and LC_* environment
    variables to helpers. The root cause was a bug in IPA (#1596161)


author: Rob Crittenden <rcritten@redhat.com> - 0.78.4-8
changelog:
  - Disable iterate-10 test which fails intermitently (#1596161)
  - Add BuildRequires for running autoreconf


author: Rob Crittenden <rcritten@redhat.com> - 0.78.4-5
changelog:
  - Add Requires on psmsic for killall in post script (#1458890)
  - upstream project migrated from fedorahosted.org to pagure.io (#1501723)
  - Strip CR/LF from passwords read from a file (#1545935)


author: Rob Crittenden <rcritten@redhat.com> - 0.78.4-4
changelog:
  - Use required DER encoding when setting CA basic constraint (#1551635)
  - NSS 3.34 more strictly enforces length checking when verifying signatures
    (#1551702)


author: Jan Cholasta <jcholast@redhat.com> - 0.78.4-3
changelog:
  - Resolves: #1367683 getcert request command fails to use Sub CA using -X
    argument
    - Fix CA option name for ipa cert-request


author: Jan Cholasta <jcholast@redhat.com> - 0.78.4-2
changelog:
  - Resolves: #1345755 Support for specifying IPA lightweight CA
    - Add 'issuer' request option for specifying issuer
    - Documentation: mark $CERTMONGER_CA_ISSUER as 0.79
    - Comment/whitespace fixup
    - ipa-submit: Retry without "ca" on OptionError
    - getcert: fix a potential out-of-bounds
    - Document the -X option in the ipa-submit man page
  - Resolves: #1351052 certmonger build for RHEL 7.3 failure
    - Stop assuming RSA 512 works
    - Stop assuming RSA 512 works, part two
    - Fix a flakiness in the 028-dbus test


author: Jan Cholasta <jcholast@redhat.com> - 0.78.4-1
changelog:
  - Resolves: #1249753 challenge password not added in csr using start-tracking
  - Resolves: #1250397 Remove certmonger rekey feature in 7.2
    - Remove rekey feature
  - Related:  #1205756 Rebase certmonger to 0.77 or later
    - Update to upstream 0.78.4


author: Jan Cholasta <jcholast@redhat.com> - 0.78.3-1
changelog:
  - Resolves: #1244914 scep ca helper does not parse command line options
    correctly
  - Related:  #1205756 Rebase certmonger to 0.77 or later
    - Update to upstream 0.78.3


author: Jan Cholasta <jcholast@redhat.com> - 0.78.1-1
changelog:
  - Resolves: #1140241 RFE: Add SCEP support to certmonger
  - Resolves: #1148001 ipa-getcert killed by SIGABRT
  - Resolves: #1205756 Rebase certmonger to 0.77 or later
    - Update to upstream 0.78.1


author: Jan Cholasta <jcholast@redhat.com> - 0.75.14-3
changelog:
  - backport change from git to correctly retrieve string values from DBus
    property interface replies (#1181022)


author: Jan Cholasta <jcholast@redhat.com> - 0.75.14-2
changelog:
  - backport dogtag-submit: accept additional options to pass to the server when
    approving requests using agent creds (#1165155)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.14-1
changelog:
  - make pathname canonicalization slightly smarter, to handle ".." in
    locations (#1131758)
  - updates to self-tests (#1144082)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.12-1
changelog:
  - correct encoding/decoding of variant-typed data which we receive and send
    as part of the org.freedesktop.DBus.Properties interface over the bus, and
    add some tests for them (based on patch from David Kupka, ticket #36)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.11-1
changelog:
  - when getcert is passed a -a flag, to indicate that CA root certificates
    should be stored in the specified database, don't ignore locations which
    don't include a storage scheme (#1129537)
  - when called to 'start-tracking' with the -a or -F flags, if we have
    applicable certificates on-hand for a CA that we're either told to use
    or which we decide is the correct one, save the certificates (#1129696)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.10-1
changelog:
  - when attempting to contact an IPA LDAP server, if no "ldap_uri" is set in
    default.conf, and no "host" is set either, try to construct the server URI
    using the "server" setting (#1126985)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.9-1
changelog:
  - avoid potential use-after-free after a CA is removed dynamically (thanks to
    Keenan Brock) (#1125342)
  - add a "external-helper" property to CA objects


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.8-1
changelog:
  - add a 'refresh' option to the getcert command
  - add a '-a' flag to the getcert command's 'refresh-ca' option


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.7-2
changelog:
  - reintroduce package Requires: on systemd-sysv on F19 and EL6 and older,
    conditionalized it so that it's ignored on newer releases, and make
    whether or not we call systemd-sysv-convert in triggers depend on that,
    too (#1104138)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.7-1
changelog:
  - fix an inconsistency in how we parse cookie values returned by CA helpers,
    in that single-line values would lose the end-of-line after a daemon
    restart, but not before
  - handle timeout values and exit status values when calling CA helpers
    in non-SUBMIT, non-POLL modes (#1118468)
  - rework how we save CA certificates so that we save CA certificates associated
    with end-entity certificates when we save that end-entity certificate, which
    requires running all of the involved pre- and post-save commands
  - drop package Requires: on systemd-sysv (#1104138)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.6-1
changelog:
  - avoid potential use-after-free and read overrun after a CA is added
    dynamically (thanks to Jan Cholasta)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.4-2
changelog:
  - add a %trigger to remove knowledge of the "dogtag-ipa-renew-agent" CA
    when we detect certmonger versions prior to 0.58 being installed, to
    avoid cases where some older versions choke on CAs with nicknames that
    contain characters that can't legally be part of a D-Bus name (#948993)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.3-1
changelog:
  - read and cache whether or not we saw a noOCSPcheck extension in certificates
  - documentation updates


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.2-1
changelog:
  - when generating keys using OpenSSL, if key generation fails, try
    again with the default key size, in case we're in FIPS mode
  - documentation updates


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-1
changelog:
  - add a -w (wait) flag to the getcert's request/resubmit/start-tracking
    commands, and add a non-waiting status command


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.96-1
changelog:
  - make the trust settings we apply to CA-supplied certificates while
    saving them to NSS databases run-time configurable
  - fix compiling against EL5-era OpenSSL
  - when saving CA certificates we pull from an IPA server, nickname
    it using the realm name with " IPA CA" appended rather than just
    naming it "IPA CA"
  - fix the local signer so that when it issues itself a new certificate,
    it uses the same subject name
  - add a -w flag to getcert's request, resubmit, and start-tracking
    commands, telling it to wait until either the certificate is issued,
    we get to a state where we know that we won't be able to get one, or
    we are waiting for a CA


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.94-1
changelog:
  - fix self-test errors that we trigger with new OpenSSL
  - fix a build error that would sometimes happen when we're told to
    build PIE binaries
  - quiet a compile warning


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.93-1
changelog:
  - add some self-tests
  - simplify the internal submit-to-CA logic
  - fixes for more problems found through static analysis


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.92-1
changelog:
  - retrieve CA information from CAs, if the helpers can do so, and
    add a command to explicitly refresh that data: "getcert refresh-ca"
  - offer to save CA certificates to files and databases, when specified with
    new -a and -F flags to getcert request/resubmit/start-tracking (#1098208,
    trac #31)
  - add IP address subject alternate names when getcert request/resubmit
    is passed the -A option (trac #35)
  - read and cache the freshestCRL extension in certificates
  - properly interpret KDC-unreachable errors encountered in the IPA
    submission error as a server-unreachable error that we will retry,
    rather than a misconfiguration error which we won't
  - don't let tests get tripped up by new formatting used in dos2unix status
    messages (#1099080)
  - updated translations
  - be explicit that we are going to use bashisms in test scripts by calling
    the shell interpreter as 'bash' rather than 'sh' (trac #27)


author: Nalin Dahyabhai <nalin@redhat.com> 0.74-1
changelog:
  - also save state when we exit due to SIGHUP
  - don't get tripped up when enrollment helpers hand us certificates which
    include CRLF line terminators (ticket #25)
  - be tolerant of certificate issuer names, subject names, DNS, email, and
    Kerberos principal namem subjectAltNames, and crl distribution point URLs
    that contain newlines
  - read and cache the certificate template extension in certificates
  - enforce different minimum key sizes depending on the type of key we're
    trying to generate
  - store DER versions of subject, issuer and template subject, if we have
    them (Jan Cholasta, ticket #26)
  - when generating signing requests with subject names that don't quite parse
    as subject names, encode what we're given as PrintableString rather than
    as a UTF8String
  - always chdir() to a known location at startup, even if we're not becoming
    a daemon
  - fix a couple of memory leaks (static analysis)
  - add missing buildrequires: on which


author: Nalin Dahyabhai <nalin@redhat.com> 0.73-1
changelog:
  - updates to 0.73
    - getcert no longer claims to be stuck when a CA is unreachable,
      because the daemon isn't actually stuck


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - updates to 0.73
    - also pass the key type to enrollment helpers in the environment as
      a the value of "CERTMONGER_KEY_TYPE"


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - updates for 0.73
    - set the flag to encode EC public key parameters using named curves
      instead of the default of all-the-details when using OpenSSL
    - don't break when NSS supports secp521r1 but OpenSSL doesn't
    - also pass the CA nickname to enrollment helpers in the environment as
      a text value in "CERTMONGER_CA_NICKNAME", so they can use that value
      when reading configuration settings
    - also pass the SPKAC value to enrollment helpers in the environment as
      a base64 value in "CERTMONGER_SPKAC"
    - also pass the request's SubjectPublicKeyInfo value to enrollment helpers
      in the environment as a base64 value in "CERTMONGER_SPKI" (part of #16)
    - when generating signing requests using NSS, be more accommodating of
      requested subject names that don't parse properly


author: Nalin Dahyabhai <nalin@redhat.com> 0.72-1
changelog:
  - update to 0.72
    - support generating DSA parameters and keys on sufficiently-new OpenSSL
      and NSS
    - support generating EC keys when OpenSSL and NSS support it, using key
      size to select the curve to use from among secp256r1, secp384r1,
      secp521r1 (which are the ones that are usually available, though
      secp521r1 isn't always, even if the other two are)
    - stop trying to cache public key parameters at all and instead cache public
      key info properly
    - encode the friendlyName attribute in signing requests as a BMPString,
      not as a PrintableString
    - catch more filesystem permissions problems earlier (more of #996581)


author: Nalin Dahyabhai <nalin@redhat.com> 0.71-1
changelog:
  - check for cases where we fail to allocate memory while reading a request
    or CA entry from disk (John Haxby)
  - only handle one watch at a time, which should avoid abort() during
    attempts to reconnect to the message bus after losing our connection
    to it (#1055521)


author: Nalin Dahyabhai <nalin@redhat.com> 0.70-1
changelog:
  - add a --with-homedir option to configure, and use it, since subprocesses
    which we run and which use NSS may attempt to write to $HOME/.pki, and
    0.69's strategy of setting that to "/" was rightly hitting SELinux policy
    denials (#1047798)


author: Nalin Dahyabhai <nalin@redhat.com> 0.69-1
changelog:
  - tweak how we decide whether we're on the master or a minion when we're
    told to use certmaster as a CA
  - clean up one of the tests so that it doesn't have to work around internal
    logging producing duplicate messages
  - when logging errors while setting up to contact xmlrpc servers, explicitly
    note that the error is client-side
  - don't abort() due to incorrect locking when an attempt to save an issued
    certificate to the designated location fails (part of #1032760/#1033333,
    ticket #22)
  - when reading an issued certificate from an enrollment helper, ignore
    noise before or after the certificate itself (more of #1032760/1033333,
    ticket #22)
  - run subprocesses in a cleaned-up environment (more of #1032760/1033333,
    ticket #22)
  - clear the ca-error that we saved when we had an error talking to the CA if we
    subsequently succeed in talking to the CA
  - various other static-analysis fixes


author: Nalin Dahyabhai <nalin@redhat.com> 0.68-1
changelog:
  - notice when the OpenSSL RNG isn't seeded
  - notice when saving certificates or keys fails due to filesystem-related
    permission denial (#996581)


author: Nalin Dahyabhai <nalin@redhat.com> 0.67-3
changelog:
  - pull up a patch from master to adapt self-tests to certutil's diagnostic
    output having changed (#992050)


author: Nalin Dahyabhai <nalin@redhat.com> 0.67-1
changelog:
  - when saving certificates to NSS databases, try to preserve the trust
    value assigned to a previously-present certificate with the same nickname
    and subject, if one is found
  - when saving certificates to NSS databases, also prune certificates from
    the database which have both the same nickname and subject as the one
    we're adding, to avoid tripping up tools that only fetch one certificate
    by nickname


author: Nalin Dahyabhai <nalin@redhat.com> 0.66-1
changelog:
  - build as position-independent executables with early binding (#883966)
  - also don't tag the unit file as a configuration file (internal tooling)


author: Nalin Dahyabhai <nalin@redhat.com> 0.64-1
changelog:
  - at startup, if we resume the state machine for a given certificate to a state
    which expects to have the newly-added lock already acquired, acquire it
    before moving on with the certificate's work (still aimed at fixing #883484)


author: Nalin Dahyabhai <nalin@redhat.com> 0.63-1
changelog:
  - serialize access to NSS databases and the running of pre- and post-save
    commands which might also access them (possibly fixing part of #883484)


author: Nalin Dahyabhai <nalin@redhat.com> 0.62-1
changelog:
  - add a -u flag to getcert to enable requesting a keyUsage extension value
  - request subjectKeyIdentifier extensions from CAs, and include them in
    self-signed certificates
  - request basicConstraints from CAs, defaulting to requests for end-entity
    certificates
  - when requesting CA certificates, also request authorityKeyIdentifier
  - add support for requesting CRL distribution point and authorityInfoAccess
    extensions that specify OCSP responder locations
  - don't crash when OpenSSL can't build a template certificate from a request
    when we're in FIPS mode
  - put NSS in FIPS mode, when the system booted that way, except when we're
    trying to write certificates to a database
  - fix CSR generation and self-signing in FIPS mode with NSS
  - fix self-signing in FIPS mode with OpenSSL
  - new languages from the translation team: mai, ml, nn, ga


author: Nalin Dahyabhai <nalin@redhat.com> 0.61-3
changelog:
  - backport change from git to not choke if X509_REQ_to_X509() fails when we're
    self-signing using OpenSSL
  - backport another change from git to represent this as a CA-rejected error


author: Nalin Dahyabhai <nalin@redhat.com> 0.61-1
changelog:
  - fix a regression in reading old request tracking files where the
    request was in state NEED_TO_NOTIFY or NOTIFYING


author: Nalin Dahyabhai <nalin@redhat.com> 0.60-1
changelog:
  - adjust internals of logic for talking to dogtag to at least have a
    concept of non-agent cases
  - when talking to an IPA server's internal Dogtag instance, infer which
    ports the CA is listening on from the "dogtag_version" setting in the
    IPA configuration (Ade Lee)
  - send a notification (or log a message, whatever) when we save a new
    certificate (#766167)


author: Nalin Dahyabhai <nalin@redhat.com> 0.58-1
changelog:
  - add a "dogtag-ipa-renew-agent" CA so that we can renew certificates using
    an IPA server's internal Dogtag instance
  - export the requested profile and old certificate to enrollment helpers
  - make libxml and libcurl into hard build-time requirements
  - serialize all pre/save/post sequences to make sure that stop/save/start
    doesn't become stop1/save1/stop2/start1/save2/start2 when we're stopping
    a service while we muck with more than one of its certificates


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a command option (-T) to getcert for specifying which enrollment
    profile to tell a CA that we're using, in case it cares (#10)


author: Nalin Dahyabhai <nalin@redhat.com> 0.57-1
changelog:
  - clarify that the command passed to getcert -C is a "post"-save command
  - add a "pre"-save command option to getcert, specified with the -B flag (#9)
  - after we notify of an impending not-valid-after approaching, don't do it
    again immediately


author: Nalin Dahyabhai <nalin@redhat.com> 0.56-1
changelog:
  - when a caller sets the is-default flag on a CA, and another CA is no longer
    the default, emit the PropertiesChanged signal on the CA which is not the
    default, instead on the new default a second time
  - drop some dead code from the D-Bus message handlers (static analysis,
    - cache public keys when we read private keys
  - go back to printing an error indicating that we're missing a required
    argument when we're missing a required argument, not that the option is
    invalid (broken since 0.51, #796542)


author: Nalin Dahyabhai <nalin@redhat.com> 0.55-1
changelog:
  - allow root to use our implementation of org.freedesktop.DBus.Properties
  - take more care to not emit useless PropertiesChanged signals


author: Nalin Dahyabhai <nalin@redhat.com> 0.53-1
changelog:
  - large changes to the D-Bus glue, exposing a lot of data which we were
    providing via D-Bus getter methods as properties, and providing more
    accurate introspection data
  - emit a signal when the daemon saves a certificate to the destination
    location, and provide an option to have the daemon spawn an arbitrary
    command at that point, too (#766167)
  - enable starting the service by default on RHEL (#765600)


author: Nalin Dahyabhai <nalin@redhat.com> 0.52-1
changelog:
  - note that SELinux usually confines us to writing only to cert_t in
    doc/getting-started.txt (#765599)
  - fix crashes when we add a request during our first run when we're
    populating the hard-coded CA list
  - properly deal with cases where a path is passed to us is "./XXX"
  - in session mode, create our data directories as we go


author: Nalin Dahyabhai <nalin@redhat.com> 0.51-1
changelog:
  - api: lift restrictions on characters used in request and CA nicknames by
    making their object names not incorporate their nicknames
  - api: add find_request_by_nickname and find_ca_by_nickname
  - certmonger-ipa-submit.8: list -k, -K, -t in the summary, document -K
  - getcert: print "invalid option" error messages ourselves (#756291)
  - ipa-submit: supply a Referer: header when submitting requests to IPA
    (#750617, needed for #747710)


author: Nalin Dahyabhai <nalin@redhat.com> 0.50-1
changelog:
  - really fix these this time:
   - getcert: error out when "list -c" finds no matching CA (#743488)
   - getcert: error out when "list -i" finds no matching request (#743485)


author: Nalin Dahyabhai <nalin@redhat.com> 0.49-1
changelog:
  - when using an NSS database, skip loading the module database (#743042)
  - when using an NSS database, skip loading root certs
  - generate SPKAC values when generating CSRs, though we don't do anything
    with SPKAC values yet
  - internally maintain and use challenge passwords, if we have them
  - behave better when certificates have shorter lifetimes
  - add/recognize/handle notification type "none"
  - getcert: error out when "list -c" finds no matching CA (#743488)
  - getcert: error out when "list -i" finds no matching request (#743485)


author: Nalin Dahyabhai <nalin@redhat.com> 0.47-1
changelog:
  - getcert: distinguish between {stat() succeeds but isn't a directory} and
    {stat() failed} when printing an error message (#739903)
  - getcert resubmit/start-tracking: when we're looking for an existing request
    by ID, and we don't find one, note that specifically (#741262)


author: Nalin Dahyabhai <nalin@redhat.com> 0.46-1
changelog:
  - treat the ability to access keys in an NSS database without using a PIN,
    when we've been told we need one, as an error (#692766, really this time)


author: Nalin Dahyabhai <nalin@redhat.com> 0.44-1
changelog:
  - check specifically for cases where a specified token that we need to
    use just isn't present for whatever reason (#697058)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - if xmlrpc-c's struct xmlrpc_curl_xportparms has a gss_delegate field, set
    it to TRUE when we're doing Negotiate auth (#727864, #727863, #727866)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - treat the ability to access keys in an NSS database without using a PIN,
    when we've been told we need one, as an error (#692766)
  - when handling "getcert resubmit" requests, if we don't have a key yet,
    make sure we go all the way back to generating one (#694184)
  - getcert: try to clean up tests for NSS and PEM file locations (#699059)
  - don't try to set reconnect-on-exit policy unless we managed to connect
    to the bus (#712500)
  - handle cases where we specify a token but the storage token isn't
    known (#699552)
  - getcert: recognize -i and storage options to narrow down which requests
    the user wants to know about (#698772)
  - output hints when the daemon has startup problems, too (#712075)
  - add flags to specify whether we're bus-activated or not, so that we can
    exit if we have nothing to do after handling a request received over
    the bus if some specified amount of time has passed
  - explicitly disallow non-root access in the D-Bus configuration (#712072)
  - migrate to systemd on releases newer than Fedora 15 or RHEL 6 (#718172)
  - fix a couple of incorrect calls to talloc_asprintf() (#721392)


author: Nalin Dahyabhai <nalin@redhat.com> 0.42-1
changelog:
  - getcert: fix a buffer overrun preparing a request for the daemon when
    there are more parameters to encode than space in the array (#696185)
  - updated translations: de, es, id, pl, ru, uk


author: Nalin Dahyabhai <nalin@redhat.com> 0.41-1
changelog:
  - read information about the keys we've just generated before proceeding
    to generating a CSR (part of #694184, part of #695675)
  - when processing a "resubmit" request from getcert, go back to key
    generation if we don't have keys yet, else go back to CSR generation as
    before (#694184, #695675)
  - configure with --with-tmpdir=/var/run/certmonger and own /var/run/certmonger
    (#687899), and add a systemd tmpfiles.d control file for creating
    /var/run/certmonger on Fedora 15 and later
  - let session instances exit when they get disconnected from the bus
  - use a lock file to make sure there's only one session instance messing
    around with the user's files at a time
  - fix errors saving certificates to NSS databases when there's already a
    certificate there with the same nickname (#695672)
  - make key and certificate location output from 'getcert list' more properly
    translatable (#7)


author: Nalin Dahyabhai <nalin@redhat.com> 0.40-1
changelog:
  - update to 0.40
    - fix validation check on EKU OIDs in getcert (#691351)
    - get session bus mode sorted
    - add a list of recognized EKU values to the getcert-request man page


author: Nalin Dahyabhai <nalin@redhat.com> 0.39-1
changelog:
  - update to 0.39
    - fix use of an uninitialized variable in the xmlrpc-based submission
      helpers (#690886)


author: Nalin Dahyabhai <nalin@redhat.com> 0.38-1
changelog:
  - update to 0.38
    - catch cases where we can't read a PIN file, but we never have to log
      in to the token to access the private key (more of #688229)


author: Nalin Dahyabhai <nalin@redhat.com> 0.37-1
changelog:
  - update to 0.37
    - be more careful about checking if we can read a PIN file successfully
      before we even call an API that might need us to try (#688229)
    - fix strict aliasing warnings


author: Nalin Dahyabhai <nalin@redhat.com> 0.36-1
changelog:
  - update to 0.36
    - fix some use-after-free bugs in the daemon (#689776)
    - fix a copy/paste error in certmonger-ipa-submit(8)
    - getcert now suppresses error details when not given its new -v option
      (#683926, more of #681641/#652047)
    - updated translations
      - de, es, pl, ru, uk
      - indonesian translation is now for "id" rather than "in"


author: Nalin Dahyabhai <nalin@redhat.com> 0.35.1-1
changelog:
  - fix a self-test that broke because one-year-from-now is now a day's worth
    of seconds further out than it was a few days ago


author: Nalin Dahyabhai <nalin@redhat.com> 0.34-1
changelog:
  - update to 0.34
    - explicitly note the number of requests we're tracking in the output of
      "getcert list" (#652049)
    - try to offer some suggestions when we get certain specific errors back
      in "getcert" (#652047)
    - updated translations
      - es


author: Nalin Dahyabhai <nalin@redhat.com> 0.33-1
changelog:
  - update to 0.33
    - new translations
      - id by Okta Purnama Rahadian!
    - updated translations
      - pl, uk
    - roll up assorted fixes for defects


author: Nalin Dahyabhai <nalin@redhat.com> 0.32-2
changelog:
  - depend on the e2fsprogs libuuid on Fedora and RHEL releases where it's
    not part of util-linux-ng


author: Nalin Dahyabhai <nalin@redhat.com> 0.32-1
changelog:
  - oops, rfc5280 says we shouldn't be populating unique identifiers, so
    make it a configuration option and default the behavior to off


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-4
changelog:
  - explicitly require "dbus" to try to ensure we have a running system bus
    when we get started (#639126)


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-2
changelog:
  - try to SIGHUP the messagebus daemon at first install so that it'll
    let us claim our service name if it isn't restarted before we are
    first started (#636876)


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-1
changelog:
  - update to 0.30
    - fix errors computing the time at the end of an interval that were
      caught by self-tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.29-1
changelog:
  - update to 0.29
    - fix 64-bit cleanliness issue using libdbus
    - actually include the full set of tests in tarballs


author: Nalin Dahyabhai <nalin@redhat.com> 0.28-1
changelog:
  - update to 0.28
    - fix self-signing certificate notBefore and notAfter values on 32-bit
      machines


author: Nalin Dahyabhai <nalin@redhat.com> 0.26-1
changelog:
  - update to 0.26
    - when canceling a submission request that's being handled by a helper,
      reap the child process's status after killing it (#624120)


author: Nalin Dahyabhai <nalin@redhat.com> 0.25-1
changelog:
  - update to 0.25
    - new translations
      - in by Okta Purnama Rahadian!
    - fix detection of cases where we can't access a private key in an NSS
      database because we don't have the PIN
    - teach '*getcert start-tracking' about the -p and -P options which the
      '*getcert request' commands already understand (#621670), and also
      the -U, -K, -E, and -D flags
    - double-check that the nicknames of keys we get back from
      PK11_ListPrivKeysInSlot() match the desired nickname before accepting
      them as matches, so that our tests won't all blow up on EL5
    - fix dynamic addition and removal of CAs implemented through helpers


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-4
changelog:
  - init script: ensure that the subsys lock is created whenever we're called to
    "start" when we're already running (even more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-3
changelog:
  - more gracefully handle manual daemon startups and cleaning up of unexpected
    crashes (still more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-2
changelog:
  - don't create the daemon pidfile until after we've connected to the D-Bus
    (still more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-1
changelog:
  - update to 0.24
    - keep the lock on the pid file, if we have one, when we fork, and cancel
      daemon startup if we can't gain ownership of the lock (the rest of #596719)
    - make the man pages note which external configuration files we consult when
      submitting requests to certmaster and ipa CAs


author: Nalin Dahyabhai <nalin@redhat.com> 0.23-1
changelog:
  - update to 0.23
    - new translations
      - pl by Piotr Drąg!
    - cancel daemon startup if we can't gain ownership of our well-known
      service name on the DBus (#596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.22-1
changelog:
  - update to 0.22
    - new translations
      - de by Fabian Affolter!
    - certmaster-submit: don't fall over when we can't find a certmaster.conf
      or a minion.conf (i.e., certmaster isn't installed) (#588932)
    - when reading extension values from certificates, prune out duplicate
      principal names, email addresses, and hostnames


author: Nalin Dahyabhai <nalin@redhat.com> 0.21-1
changelog:
  - update to 0.21
    - getcert/*-getcert: relay the desired CA to the local service, whether
      specified on the command line (in getcert) or as a built-in hard-wired
      default (in *-getcert) (#584983)
    - flesh out the default certmonger.conf so that people can get a feel for
      the expected formatting (Jenny Galipeau)


author: Nalin Dahyabhai <nalin@redhat.com> 0.20-1
changelog:
  - update to 0.20
    - correctly parse certificate validity periods given in years (spotted by
      Stephen Gallagher)
    - setup for translation
      - es by Héctor Daniel Cabrera!
      - ru by Yulia Poyarkova!
      - uk by Yuri Chornoivan!
    - fix unpreprocessed defaults in certmonger.conf's man page
    - tweak the IPA-specific message that indicates a principal name also needs
      to be specified if we're not using the default subject name (#579542)
    - make the validity period of self-signed certificates into a configuration
      setting and not a piece of the state information we track about the signer
    - init script: exit with status 2 instead of 1 when invoked with an
      unrecognized argument (#584517)


author: Nalin Dahyabhai <nalin@redhat.com> 0.19-1
changelog:
  - update to 0.19
    - correctly initialize NSS databases that need to be using a PIN
    - add certmonger.conf, for customizing notification timings and settings,
      and use of digests other than the previously-hard-coded SHA256, and
      drop those settings from individual requests
    - up the default self-sign validity interval from 30 days to 365 days
    - drop the first default notification interval from 30 days to 28 days
      (these two combined to create a fun always-reissuing loop earlier)
    - record the token which contains the key or certificate when we're
      storing them in an NSS database, and report it
    - improve handling of cases where we're supposed to use a PIN but we
      either don't have one or we have the wrong one
    - teach getcert to accept a PIN file's name or a PIN value when adding
      a new entry
    - update the IPA submission helper to use the new 'request_cert' signature
      that's landing soon
    - more tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.18-1
changelog:
  - update to 0.18
    - add support for using encrypted storage for keys, using PIN values
      supplied directly or read from files whose names are supplied
    - don't choke on NSS database locations that use the "sql:" or "dbm:"
      prefix


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-2
changelog:
  - make the D-Bus configuration file (noreplace) (#541072)
  - make the %check section and the deps we have just for it conditional on
    the same macro (#541072)


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-1
changelog:
  - update to 0.17
    - fix a hang in the daemon (Rob Crittenden)
    - documentation updates
    - fix parsing of submission results from IPA (Rob Crittenden)


author: Nalin Dahyabhai <nalin@redhat.com> 0.15-1
changelog:
  - update to 0.15
    - notice that a directory with a trailing '/' is the same location as the
      directory without it
    - fix handling of the pid file when we write one (by actually giving it
      contents)


author: Nalin Dahyabhai <nalin@redhat.com> 0.14-1
changelog:
  - update to 0.14
    - check key and certificate location at add-time to make sure they're
      absolute paths to files or directories, as appropriate
    - IPA: dig into the 'result' item if the named result value we're looking
      for isn't in the result struct


author: Nalin Dahyabhai <nalin@redhat.com> 0.13-1
changelog:
  - update to 0.13
    - change the default so that we default to trying to auto-refresh
      certificates unless told otherwise
    - preemptively enforce limitations on request nicknames so that they
      make valid D-Bus object path components


author: Nalin Dahyabhai <nalin@redhat.com> 0.12-1
changelog:
  - update to 0.12
    - add a crucial bit of error reporting when CAs reject our requests
    - count the number of configured CAs correctly


author: Nalin Dahyabhai <nalin@redhat.com> 0.11-1
changelog:
  - update to 0.11
    - add XML-RPC submission for certmaster and IPA
    - prune entries with duplicate names from the data store


author: Nalin Dahyabhai <nalin@redhat.com> 0.9-1
changelog:
  - update to 0.9
    - run external submission helpers correctly
    - fix signing of signing requests generated for keys stored in files
    - only care about new interface and route notifications from netlink,
      and ignore notifications that don't come from pid 0
    - fix logic for determining expiration status
    - correct the version number in self-signed certificates


author: Nalin Dahyabhai <nalin@redhat.com> 0.8-1
changelog:
  - update to 0.8
    - encode windows UPN values in requests correctly
    - watch for netlink routing changes and restart stalled submission requests
    - 'getcert resubmit' can force a regeneration of the CSR and submission


author: Nalin Dahyabhai <nalin@redhat.com> 0.7-1
changelog:
  - update to 0.7
    - first cut at a getting-started document
    - refactor some internal key handling with NSS
    - check for duplicate request nicknames at add-time


author: Nalin Dahyabhai <nalin@redhat.com> 0.6-1
changelog:
  - update to 0.6
    - man pages
    - 'getcert stop-tracking' actually makes the server forget now
    - 'getcert request -e' was redundant, dropped the -e option
    - 'getcert request -i' now sets the request nickname
    - 'getcert start-tracking -i' now sets the request nickname


author: Nalin Dahyabhai <nalin@redhat.com> 0.5-1
changelog:
  - update to 0.5
    - packaging fixes
    - add a selfsign-getcert client
    - self-signed certs now get basic constraints and their own serial numbers
    - accept id-ms-kp-sc-logon as a named EKU value in a request


author: Alex Burmashev <alexander.burmashev@oracle.com> - 7.2.7-1.0.1
changelog:
  - Update to 7.2.7 upstream
  - Drop not needed OL7 patchset [Orabug: 30521747]
  - Backport needed upstream patches [Orabug: 30352094]


author: Dave Anderson <anderson@redhat.com> - 7.2.3-9
changelog:
  - Alternate list loop detection option
    Resolves: rhbz#1595389
  - Readline library tab completion plugin
    Resolves: rhbz#1656165


author: Dave Anderson <anderson@redhat.com> - 7.2.3-8
changelog:
  - Fix ppc64 "bt" command failure reporting invalid NIP value for a user-space task. 
    Resolves: rhbz#1617936


author: Dave Anderson <anderson@redhat.com> - 7.2.3-7
changelog:
  - Support ppc64 increased VA range
  - Fix ppc64 "bt" command failure reporting invalid NIP value
    Resolves: rhbz#1617936


author: Dave Anderson <anderson@redhat.com> - 7.2.3-5
changelog:
  - Rebase to github commits b9d76838 to c79a11fa
    Resolves: rhbz#1559460
  - Fix ppc64/ppc6le stacksize calculation
    Resolves: rhbz#1589685


author: Dave Anderson <anderson@redhat.com> - 7.2.3-2
changelog:
  - Work around rhel-7.6 s390/s390x ptrace.h incompatiblity FTBFS issue
  - Rebase to github commit 46d21219
    Resolves: rhbz#1559460


author: Dave Anderson <anderson@redhat.com> - 7.2.3-1
changelog:
  - Rebase to upstream version 7.2.3
    Resolves: rhbz#1559460
  - eBPF support with new bpf command
    Resolves: rhbz#1559758


author: Dave Anderson <anderson@redhat.com> - 7.2.0-5
changelog:
  - Additional support for analyzing an SADUMP dumpfile if KASLR
    and KPTI are both enabled
    Resolves: rhbz#1504467


author: Dave Anderson <anderson@redhat.com> - 7.2.0-3
changelog:
  - Rebase to github commits 494a796e to 63419fb9
    Resolves: rhbz#1497316
  - Fix IRQ stack transition failure due to kernel's removal of 64-byte gap
    Resolves: rhbz#1530887


author: Dave Anderson <anderson@redhat.com> - 7.2.0-1
changelog:
  - Rebase to upstream version 7.2.0
  - Rebase to github commits da9bd35a to e2efacdd
    Resolves: rhbz#1497316
  - ppc64le: fix for "WARNING: cannot access vmalloc'd module memory"
    Resolves: rhbz#1485391
  - Support for analyzing an SADUMP crash dump if KASLR is enabled
    Resolves: rhbz#1504467


author: Dave Anderson <anderson@redhat.com> - 7.1.9-2
changelog:
  - Rebase to github commits 87179026 to ad3b8476
    Resolves: rhbz#1393534
  - Prohibit native gdb disassemble command when KASLR
    Resolves: rhbz#1445649


author: Dave Anderson <anderson@redhat.com> - 7.1.9-1
changelog:
  - Rebase to upstream version 7.1.9
    Resolves: rhbz#1393534
  - Fix gdb "set scope" option for KASLR kernels.
    Resolves: rhbz#1440725
  - Fix for the determination of the x86_64 "phys_base" value when it is
    not passed in the VMCOREINFO data of ELF vmcores
    Resolves: rhbz#1439170


author: Dave Anderson <anderson@redhat.com> - 7.1.8-1
changelog:
  - Rebase to upstream version 7.1.8
    Resolves: rhbz#1393534
  - POWER9 - Power ISA 3.0 related support for crash utility
    Resolves: rhbz#1368711
  - crash package update - ppc64/ppc64le
    Resolves: rhbz#1384944
  - exception RIP: unknown or invalid address
    Resolves: rhbz#1350457
  - Crash does not always parse correctly the modules symbol tables
    Resolves: rhbz#1360415
  - ARM64: crash live system from: WARNING: cannot read linux_banner string
    Resolves: rhbz#1392007
  - kmem: invalid structure member offset: page_count
    Resolves: rhbz#1392011
  - Kernel address space randomization [KASLR] support 
    Resolves: rhbz#1392658
  - invalid structure size: tnt
    Resolves: rhbz#1420653


author: Dave Anderson <anderson@redhat.com> - 7.1.5-2
changelog:
  - Fix for kernel module symbol gathering when the ordering of module
    symbol name strings does not match the order of the kernel_symbol
    structures.
  - Resolves: rhbz#1375130


author: Dave Anderson <anderson@redhat.com> - 7.1.5-1
changelog:
  - Rebase to upstream version 7.1.5
    Resolves: rhbz#1292566
  - Decode clflushopt instruction
    Resolves: rhbz#1262479
  - Support AArch64 QEMU generated dumps 
    Resolves: rhbz#1299873
  - crash: zero-size memory allocation (aarch64) 
    Resolves: rhbz#1312738


author: Dave Anderson <anderson@redhat.com> - 7.1.2-3
changelog:
  - crash fails to read or wrongly reads some parts of memory in sadump vmcore format
    Resolves: rhbz#1282997


author: Dave Anderson <anderson@redhat.com> - 7.1.2-2
changelog:
  - Fix "kmem -s <address>", "bt -F[F]", and "rd -S[S]" options in kernels 
    configured with CONFIG_SLUB having multiple-page slabs.
    Resolves: rhbz#1244003
  - Fix for SIGSEGV generated by "bt -[f|F]" in ARM64 kernels.
    Resolves: rhbz#1248859


author: Dave Anderson <anderson@redhat.com> - 7.1.2-1
changelog:
  - Rebase to upstream version 7.1.2
    Resolves: rhbz#1207696
  - Fix several ppc64 backtrace issues
    Resolves: rhbz#1235447


author: Dave Anderson <anderson@redhat.com> - 7.1.1-1
changelog:
  - Rebase to upstream version 7.1.1
    Resolves: rhbz#1207696
  - Display s390x vector registers from a kernel dump.
    Resolves: rhbz#1182161
  - Fix date displayed on initial system banner and by the "sys" command on ARM64.
    Resolves: rhbz#1223044
  - Fix ARM64 page size calculation on 4.1 and later kernels.
    Resolves: rhbz#1222645


author: Dave Anderson <anderson@redhat.com> - 7.0.9-5
changelog:
  - Support new sadump format that can represent more than 16 TB physical memory space
    Resolves: rhbz#1182383


author: Dave Anderson <anderson@redhat.com> - 7.0.9-2
changelog:
  - Use registers from QEMU-generated ELF and compressed kdump headers 
    for active task backtraces.
  - Resolves: rhbz#1169555


author: Dave Anderson <anderson@redhat.com> - 7.0.8-2
changelog:
  - Fix ps performance patch regression on live systems.
  - Resolves: rhbz#1134177
  - Minor build-related fixes for ppc64le.
  - Resolves: rhbz#1123991


author: Dave Anderson <anderson@redhat.com> - 7.0.8-1
changelog:
  - Rebase to upstream version 7.0.8.
  - Resolves: rhbz#1110513
  - Fix to calculate the physical base address of dumpfiles created
    by a "virsh dump" of an OVMF guest.
  - Resolves: rhbz#1080698
  - Support for aarch64 architecture.
  - Resolves: rhbz#1110551
  - Fix to prevent crash from spinning endlessly on a corrupted/truncated
    dumpfile whose bitmap data is not wholly contained within the file.
  - Resolves: rhbz#1114088
  - Support for ppc64le architecture.
  - Resolves: rhbz#1123991


author: Dave Anderson <anderson@redhat.com> - 7.0.2-5
changelog:
  - Fix for a missing kernel-mode exception frame dump by the x86_64 
    "bt" command if a page fault was generated by a bogus RIP.
  - Resolves: rhbz#1057353
  - Fix for the x86_64 "bt" command to prevent an unwarranted message
    indicating "WARNING: possibly bogus exception frame" generated
    from a blocked kernel thread that was in the process of exec'ing
    a user process via the call_usermodehelper() facility.
  - Resolves: rhbz#1057357


author: Dave Anderson <anderson@redhat.com> - 7.0.2-4
changelog:
  - Fixes for "kmem -S" command for CONFIG_SLUB.
  - Resolves: rhbz#1045591
  - Increase S390X NR_CPUS
  - Resolves: rhbz#1051156


author: Dave Anderson <anderson@redhat.com> - 7.0.2-2
changelog:
  - Compressed kdump 46-bit physical memory support
    Resolves: rhbz#1015250
  - Fix incorrect backtrace for dumps taken with "virsh dump --memory-only"
    Resolves: rhbz#1020469
  - Fix cpu number display on systems with more than 254 cpus
    Resolves: rhbz#1020536


author: Dave Anderson <anderson@redhat.com> - 7.0.2-1
changelog:
  - Update to latest upstream release
  - Fix for ppc64 embedded gdb NULL pointer translation sigsegv
  - Fix for bt -F failure


author: Dave Anderson <anderson@redhat.com> - 5.1.8-1
changelog:
  - Update to latest upstream release
  - Additional fixes for gcc-4.6 -Werror compile failures for ARM architecture.


author: Dave Anderson <anderson@redhat.com> - 4.0.9-1
changelog:
  - Update to upstream release, which allows the removal of the 
    Revision tag workaround, the crash-4.0-8.11-dwarf3.patch and 
    the crash-4.0-8.11-optflags.patch


author: Lubomir Rintel <lkundrak@v3.sk> - 4.0.8.11-1
changelog:
  - Update to later upstream release
  - Fix abuse of Revision tag

  - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild


author: Dave Anderson <anderson@redhat.com> - 4.0-7.7.1
changelog:
  - Updates to this file per crash merge review
  - Update to upstream version 4.0-7.7.  Full changelog viewable in:
      http://people.redhat.com/anderson/crash.changelog.html


author: Dave Anderson <anderson@redhat.com> - 4.0-6.0.5
changelog:
  - Second attempt at addressing the GCC 4.3 build, which failed due
    to additional ptrace.h includes in the lkcd vmdump header files.


author: Dave Anderson <anderson@redhat.com> - 4.0-6.0.4
changelog:
  - First attempt at addressing the GCC 4.3 build, which failed on x86_64
    because ptrace-abi.h (included by ptrace.h) uses the "u32" typedef,
    which relies on <asm/types.h>, and include/asm-x86_64/types.h
    does not not typedef u32 as done in include/asm-x86/types.h.


author: Dave Anderson <anderson@redhat.com> - 4.0-3.3
changelog:
  - Updated crash.patch to match upstream version 4.0-3.3.
  - Support for x86_64 relocatable kernels.  BZ #204557


author: Dave Anderson <anderson@redhat.com> - 4.0-3.1
changelog:
  - Updated crash.patch to match upstream version 4.0-3.1.
  - Added kdump reference to description.
  - Added s390 and s390x to ExclusiveArch list.  BZ #199125
  - Removed LKCD v1 pt_regs references for s390/s390x build.
  - Removed LKCD v2_v3 pt_regs references for for s390/s390x build.


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.4
changelog:
  - Updated crash.patch such that <asm/page.h> is not #include'd
    by s390_dump.c; IBM did not make the file s390[s] only; BZ #192719


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.3
changelog:
  - Updated crash.patch such that <asm/page.h> is not #include'd
    by vas_crash.h; only ia64 build complained; BZ #191719


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.2
changelog:
  - Updated crash.patch such that <asm/segment.h> is not #include'd
    by lkcd_x86_trace.c; also for BZ #191719


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.1
changelog:
  - Updated crash.patch to bring it up to 4.0-2.26, which should 
    address BZ #191719 - "crash fails to build in mock"


author: Dave Anderson <anderson@redhat.com> 3.10-13
changelog:
  - Compiler error- and warning-related fixes for gcc 4 build.
  - Update to enhance x86 and x86_64 gdb disassembly output so as to
    symbolically display call targets from kernel module text without
    requiring module debuginfo data.
  - Fix hole where an ia64 vmcore could be mistakenly accepted as a
    usable dumpfile on an x86_64 machine, leading eventually to a
    non-related error message.


author: Dave Anderson <anderson@redhat.com> 3.10-9
changelog:
  - Updated source package to crash-3.10.tar.gz, containing
    IBM's final ppc64 processor support for RHEL4
  - Fixes potential "bt -a" hang on dumpfile where netdump IPI interrupted
    an x86 process while executing the instructions just after it had entered
    the kernel for a syscall, but before calling the handler.  BZ #139437
  - Update to handle backtraces in dumpfiles generated on IA64 with the
    INIT switch (functionality intro'd in RHEL3-U5 kernel).  BZ #139429
  - Fix for handling ia64 and x86_64 machines booted with maxcpus=1 on
    an SMP kernel.  BZ #139435
  - Update to handle backtraces in dumpfiles generated on x86_64 from the
    NMI exception stack (functionality intro'd in RHEL3-U5 kernel).
  - "kmem -[sS]" beefed up to more accurately verify slab cache chains
    and report errors found.
  - Fix for ia64 INIT switch-generated backtrace handling when
    init_handler_platform() is inlined into ia64_init_handler();
    properly handles both RHEL3 and RHEL4 kernel patches.
    BZ #138350
  - Update to enhance ia64 gdb disassembly output so as to
    symbolically display call targets from kernel module
    text without requiring module debuginfo data.


author: Dave Anderson <anderson@redhat.com> 3.8-3
changelog:
  - remove (harmless) error message during ia64 diskdump invocation when
    an SMP system gets booted with maxcpus=1
  - several 2.6 kernel specific updates


author: Jay Fenlason <fenlason@redhat.com> 3.5-2
changelog:
  - remove ppc from arch list, since it doesn't work with ppc64 kernels
  - remove alpha from the arch list since we don't build it any more


author: Nathan Scott <nathans@redhat.com> - 4.3.2-4
changelog:
  - Fix a pmdaproc memory leak (BZ 1721107)
  - Rebuild with selinux runtime dependency update (BZ 1714101)
  - Update selinux-policy to latest upstream (BZs 1699830, 1700989)


author: Nathan Scott <nathans@redhat.com> - 4.3.2-2
changelog:
  - Rework the pcp-libs ldconfig post-op (BZ 1705362)
  - Resolve a QA file permissions diagnostic issue


author: Nathan Scott <nathans@redhat.com> - 4.3.2-1
changelog:
  - Numerous fixes in pmlogger daily scripts (BZs 1677848, 1697182, 1579881, 1603143)
  - Update PCP selinux policy rules (BZs 1692305, 1695066)
  - Adjust spec file /var/run/pcp settings (BZ 1533154)
  - Fix pmdaproc kernel process misreporting (BZ 1673250)
  - Fix pmdalinux SYSV IPC metric scalability (BZ 1699232)
  - Ensure pmdaroot reaps all of its children (BZ 1698517)
  - Corrections to python version dependencies (BZ 1676867)
  - Fix pcp-atopsar(1) -A (all) option handling (BZ 1673996)
  - Update to a more recent PCP bug fix release (BZ 1647308)


author: Nathan Scott <nathans@redhat.com> - 4.0.2-3
changelog:
  - Resolve rpm verification problem on /var/run/pcp (BZ 1533154)
  - Fix device mapper PMDA histogram metrics sigsegv (BZ 1569854)
  - Fix pmlogger_daily log rotation open port issue (BZ 1579881)


author: Nathan Scott <nathans@redhat.com> - 4.0.2-1
changelog:
  - Ensure sans font dependency resolved for webapps (BZ 1568109)
  - Ensure sans font dependency resolved for pmchart (BZ 1546640)
  - Update to latest PCP sources (BZ 1565370).


author: Lukas Berk <lberk@redhat.com> - 3.12.2-5
changelog:
  - Correction to spec file and selinux policy (BZ 1488116)
  - Show all perfevent metrics in pcpatop (BZ 1525864)
  - Multilib corrections (BZ 1537623)


author: Nathan Scott <nathans@redhat.com> - 3.12.2-3
changelog:
  - Update Source2 for external grafana webapp (BZ 1516933)
  - Remove an unhelpful log metadata diagnostic (BZ 1472153)


author: Lukas Berk <lberk@redhat.com> - 3.12.2-2
changelog:
  - Selinux policy updates (BZs 1517655,1517656,1480447,1505888,1515928,1517281,1517862)
  - Multilib corrections (BZ 1513503)


author: Lukas Berk <lberk@redhat.com> - 3.12.2-1
changelog:
  - Selinux policy updates (BZs 1459165,1460131,1488116,1447585,1449671)
  - PCP bash completions not working (BZ 1482605)
  - pmdabash man page fix (BZ 1459907)


author: Nathan Scott <nathans@redhat.com> - 3.11.8-4
changelog:
  - Enable collecting POWER9 NEST PMU perf metrics (BZ 1419490)
  - SELinux policy updates (BZs 1381301,1432086,1433271,1443632)
  - zeroconf package added (BZs 1211432, 1371950)


author: Nathan Scott <nathans@redhat.com> - 3.11.8-2
changelog:
  - Drop pcp-pmda-nutcracker package, missing deps (BZ 1425880)
  - Incorporate several fixes from Coverity scan review.


author: Nathan Scott <nathans@redhat.com> - 3.11.3-3
changelog:
  - Install the missing /etc/pcp/nssdb directory (BZ 1360206)
  - pcp-pmda-ds389 requires perl-LDAP dependency (BZ 1357605)
  - Switch pcp-pmda-ds389log to the dirsrv user (BZ 1357607)
  - pcp-pmda-ds389log requires perl-Date-Manip (BZ 1354055)
  - Remove multi-archive loglabel timezone check (BZ 1351223)


author: Nathan Scott <nathans@redhat.com> - 3.11.3-1
changelog:
  - Fix memory leak in derived metrics error handling (BZ 1331973)
  - Correctly propogate indom in mixed derived metrics (BZ 1337212, BZ 1336130)
  - Disallow stopping pmie/pmlogger daemons from cron (BZ 1336792)
  - Fail fast for easily detected bad pmcd configuration (BZ 1336210)
  - Implement primary (local) pmie concept in rc pmie (BZ 1323851)
  - Update to latest PCP sources.


author: Lukas Berk <lberk@redhat.com> - 3.11.2-1
changelog:
  - Negative nice values reported incorrectly (BZ 1328432)
  - Multithreaded clients with concurrent pmNewContext improvements (BZ 1325363)
  - PMCD agent auto-restart (BZ 1323521)
  - Segv in libpcp during discovery error processing (BZ 1319288)
  - Update to latest PCP sources.


author: Dave Brolley <brolley@redhat.com> - 3.11.1-1
changelog:
  - Call Remove script when uninstalling individual PMDAs (BZ 1304722)
  - Restrict pmcd.services to checking known pcp services (BZ 1286361)
  - Support for multi-archive contexts, across all clients (BZ 1262723)
  - Remove the default shotgun approach to stopping daemons (BZ 1210976)
  - Add mechanism for automatic recovery from PMDA timeouts (BZ 1065803)
  - Update to latest PCP sources.


author: Mark Goodwin <mgoodwin@redhat.com> - 3.11.0-1
changelog:
  - Significant speedups to elapsed time stopping pmcd (BZ 1292027)
  - Fix python derived metric exception handling issues (BZ 1299806)
  - incorrect interpolation across <mark> record in a merged archive (BZ 1296750)
  - pcp requires pcp-compat pulling in a lot of unneeded pcp-pmda-* packages (BZ 1293466)
  - Update to latest PCP sources.


author: Lukas Berk <lberk@redhat.com> - 3.10.9-1
changelog:
  - Add -V/--version support to several more commands (BZ 1284411)
  - Resolve a pcp-iostat(1) transient device exception (BZ 1249572)
  - Provides pmdapipe, an output-capturing domain agent (BZ 1163413)
  - Python PMAPI pmSetMode allows None timeval parameter (BZ 1284417)
  - Python PMI pmiPutValue now supports singular metrics (BZ 1285371)
  - Fix python PMAPI pmRegisterDerived wrapper interface (BZ 1286733)
  - Fix pmstat SEGV when run with graphical time control (BZ 1287678)
  - Make pmNonOptionsFromList error message less cryptic (BZ 1287778)
  - Drop unimplemented pmdumptext options from usage, man page (BZ 1289909)
  - Stop creating configuration files in tmp_t locations (BZ 1256125)
  - Update to latest PCP sources.


author: Mark Goodwin <mgoodwin@redhat.com> - 3.10.8-1
changelog:
  - Update pmlogger to log an immediate sample first (BZ 1269921)
  - Add pmOption host and archive setter python APIs (BZ 1270176)
  - Replace old pmatop(1) man page with pcp-atop(1) (BZ 1270761)
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.10.7-1
changelog:
  - Resolved pmchart sigsegv opening view without context (BZ 1256708)
  - Fixed pmchart memory corruption restoring Saved Hosts (BZ 1257009)
  - Fix perl PMDA API double-free on socket error path (BZ 1258862)
  - Fix python API pmGetOption(3) alignment interface (BZ 1262722)
  - Added missing RPM dependencies to several PMDA sub-packages.
  - Update to latest stable Vector release for pcp-vector-webapp.
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.10.6-1
changelog:
  - Fix pcp2graphite write method invocation failure (BZ 1243123)
  - Reduce diagnostics in pmdaproc unknown state case (BZ 1224431)
  - Derived metrics via multiple files, directory expansion (BZ 1235556)
  - Update to latest PCP sources.


author: Mark Goodwin <mgoodwin@redhat.com> - 3.10.5-1
changelog:
  - Provide and use non-exit(1)ing pmGetConfig(3) variant (BZ 1187588)
  - Resolve a pmdaproc.sh pmlogger restart regression (BZ 1229458)
  - Replacement of pmatop/pcp-atop(1) utility (BZ 1160811, BZ 1018575)
  - Reduced installation size for minimal applications (BZ 1182184)
  - Ensure pmlogger start scripts wait on pmcd startup (BZ 1185760)
  - Need to run pmcd at least once before pmval -L will work (BZ 185749)


author: Nathan Scott <nathans@redhat.com> - 3.10.4-1
changelog:
  - Update to latest PCP, pcp-webjs and Vector sources.
  - Packaging improvements after re-review (BZ 1204467)
  - Start pmlogger/pmie independent of persistent state (BZ 1185755)
  - Fix cron error reports for disabled pmlogger service (BZ 1208699)
  - Incorporate Vector from Netflix (https://github.com/Netflix/vector)
  - Sub-packages for pcp-webjs allowing choice and reducing used space.


author: Dave Brolley <brolley@redhat.com> - 3.10.3-1
changelog:
  - Update to latest PCP sources.
  - New sub-package for pcp-import-ganglia2pcp.
  - Python3 support, enabled by default in f22 onward (BZ 1194324)


author: Slavek Kabrda <bkabrda@redhat.com> - 3.10.2-3
changelog:
  - Only use Python 3 in Fedora >= 23, more info at
    https://bugzilla.redhat.com/show_bug.cgi?id=1194324#c4


author: Dave Brolley <brolley@redhat.com> - 3.10.2-1
changelog:
  - Update to latest PCP sources.
  - Improve pmdaInit diagnostics for DSO helptext (BZ 1182949)
  - Tighten up PMDA termination on pmcd stop (BZ 1180109)
  - Correct units for cgroup memory metrics (BZ 1180351)
  - Add the pcp2graphite(1) export script (BZ 1163986)


author: Nathan Scott <nathans@redhat.com> - 3.10.0-1
changelog:
  - Create new sub-packages for pcp-webjs and python3-pcp.
  - Fix __pmDiscoverServicesWithOptions(1) codes (BZ 1139529)
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.9.10-1
changelog:
  - Convert PCP init scripts to systemd services (BZ 996438)
  - Fix pmlogsummary -S/-T time window reporting (BZ 1132476)
  - Resolve pmdumptext segfault with invalid host (BZ 1131779)
  - Fix signedness in some service discovery codes (BZ 1136166)
  - New conditionally-built pcp-pmda-papi sub-package.
  - Update to latest PCP sources.


author: Dave Brolley <brolley@redhat.com> - 3.9.5-1
changelog:
  - Daemon signal handlers no longer use unsafe APIs (BZ 847343)
  - Handle /var/run setups on a temporary filesystem (BZ 656659)
  - Resolve pmlogcheck sigsegv for some archives (BZ 1077432)
  - Ensure pcp-gui-{testsuite,debuginfo} packages get replaced.
  - Revive support for EPEL5 builds, post pcp-gui merge.
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.9.4-1
changelog:
  - Merged pcp-gui and pcp-doc packages into core PCP.
  - Allow for conditional libmicrohttpd builds in spec file.
  - Adopt slow-start capability in systemd PMDA (BZ 1073658)
  - Resolve pmcollectl network/disk mis-reporting (BZ 1097095)
  - Update to latest PCP sources.


author: Dave Brolley <brolley@redhat.com> - 3.9.2-1
changelog:
  - Improve pmdarpm(1) concurrency complications (BZ 1044297)
  - Fix pmconfig(1) shell output string quoting (BZ 1085401)
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.9.0-1
changelog:
  - Create new sub-packages for pcp-webapi and pcp-manager
  - Split configuration from pcp-libs into pcp-conf (multilib)
  - Fix pmdagluster to handle more volumes, fileops (BZ 1066544)
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.8.9-1
changelog:
  - Reduce set of exported symbols from DSO PMDAs (BZ 1025694)
  - Symbol-versioning for PCP shared libraries (BZ 1037771)
  - Fix pmcd/Avahi interaction with multiple ports (BZ 1035513)
  - Update to latest PCP sources.


author: Nathan Scott <nathans@redhat.com> - 3.8.6-1
changelog:
  - Update to latest PCP sources.
  - Rework pmpost test which confused virus checkers (BZ 1024850)
  - Tackle pmatop reporting issues via alternate metrics (BZ 998735)


author: Nathan Scott <nathans@redhat.com> - 3.8.4-1
changelog:
  - Very minor release containing mostly QA related changes.
  - Enables many more metrics to be logged for Linux hosts.


author: Nathan Scott <nathans@redhat.com> - 3.8.3-1
changelog:
  - Default to Unix domain socket (authenticated) local connections.
  - Introduces new pcp-pmda-infiniband sub-package.
  - Disable systemtap-sdt-devel usage on ppc.


author: Nathan Scott <nathans@redhat.com> - 3.8.2-1
changelog:
  - Update to latest PCP sources.
  - Integrate gluster related stats with PCP (BZ 969348)
  - Fix for iostat2pcp not parsing iostat output (BZ 981545)
  - Start pmlogger with usable config by default (BZ 953759)
  - Fix pmatop failing to start, gives stacktrace (BZ 963085)


author: Nathan Scott <nathans@redhat.com> - 3.8.1-1
changelog:
  - Update to latest PCP sources.
  - Fix log import silently dropping >1024 metrics (BZ 968210)
  - Move some commonly used tools on the usual PATH (BZ 967709)
  - Improve pmatop handling of missing proc metrics (BZ 963085)
  - Stop out-of-order records corrupting import logs (BZ 958745)


author: Nathan Scott <nathans@redhat.com> - 3.8.0-1
changelog:
  - Update to latest PCP sources.
  - Validate metric names passed into pmiAddMetric (BZ 958019)
  - Install log directories with correct ownership (BZ 960858)


author: Nathan Scott <nathans@redhat.com> - 3.6.10-2
changelog:
  - Ensure tmpfile directories created in %files section.
  - Resolve tmpfile create/teardown race conditions.


author: Nathan Scott <nathans@redhat.com> - 3.6.10-1
changelog:
  - Update to latest PCP sources.
  - Resolve tmpfile security flaws: CVE-2012-5530
  - Introduces new "pcp" user account for all daemons to use.


author: Nathan Scott <nathans@redhat.com> - 3.6.9-1
changelog:
  - Update to latest PCP sources.
  - Fix pmcd sigsegv in NUMA/CPU indom setup (BZ 858384)
  - Fix sar2pcp uninitialised perl variable warning (BZ 859117)
  - Fix pcp.py and pmcollectl with older python versions (BZ 852234)


author: Mark Goodwin <mgoodwin@redhat.com> - 3.6.6-1
changelog:
  - Update to latest PCP sources, see installed CHANGELOG for details.
  - Introduces new python-pcp and pcp-testsuite sub-packages.


author: Mark Goodwin <mgoodwin@redhat.com> - 3.6.5-1
changelog:
  - Update to latest PCP sources, see installed CHANGELOG for details.
  - Fix security flaws: CVE-2012-3418 CVE-2012-3419 CVE-2012-3420 and CVE-2012-3421 (BZ 848629)


author: Martin Hicks <mort@sgi.com> - 3.0.1-2
changelog:
  - Remove IB dependencies.  The Infiniband PMDA is being moved to
    a stand-alone package.
  - Move cluster PMDA to a stand-alone package.


author: Caolán McNamara <caolanm@redhat.com> - 1.3.10-1
changelog:
  - Resolves: rhbz#1472290
    CVE-2017-7771 CVE-2017-7772 CVE-2017-7773 CVE-2017-7774
    CVE-2017-7775 CVE-2017-7776 CVE-2017-7777 CVE-2017-7778


author: Till Maas <opensource@till.name> - 1.2.4-4
changelog:
  - Rebuilt for Fedora 23 Change
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Parag Nemade <paragn AT fedoraproject DOT org> - 1.2.0-4
changelog:
  - Drop refman.pdf as its same as manual.html
  - patch install path for cmake files as they are arch dependent


author: Parag Nemade <paragn AT fedoraproject DOT org> - 1.2.0-2
changelog:
  - revert the wrongly committed f18 spec to f19
  - spec file cleanup
  - thanks to jnovy for finding me minimum texlive BR
  - partial multilib fix for manual.html


author: Nicholas van Oudtshoorn <vanoudt@gmail.com> - 1.0.2-2
changelog:
  - Removed dependency on silgraphite-devel
  - Stopped building comparerenderer - the only thing that depended on silgraphite


author: Ondřej Lysoněk <olysonek@redhat.com> - 0.99.22.4-5
changelog:
  - Fixed CVE-2018-5379 - Double free vulnerability in bgpd when processing
    certain forms of UPDATE message allowing to crash or potentially execute
    arbitrary code
  - Resolves: rhbz#1546015


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.4-4
changelog:
  - fix link to upstream tarball (#1059219)
  - reference pidfiles of quagga daemons in service files (#842309)


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.3-1
changelog:
  - update to 0.99.22.3
  - disable ospfapi and ospfclient
  - fix bogus dates in changelog
  - resolves : #984532


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.1-7
changelog:
  - quagga is service which might implement networking, thus it should not have
    WantedBy=network.target in its systemd configuration
  - resolves: #976883


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.1-6
changelog:
  - obsolete quagga-sysvinit subpackage
  - use macro to specify location where to install tmpfiles configuration file
  - fix rpm scripts handling documentation in info format


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.1-1
changelog:
  - update to 0.99.22.1
  - install tmpfiles dropping configuration to proper location
  - drop sysv subpackage and initscripts support


author: Adam Tkac <atkac redhat com> - 0.99.22-1
changelog:
  - update to 0.99.22
  - quagga-CVE-2012-1820.patch has been merged
  - explicitly enable SMNP AgentX interface


author: Jiri Skala <jskala@redhat.com> - 0.99.19-1
changelog:
  - fixes #741343 - CVE-2011-3323 CVE-2011-3324 CVE-2011-3325 CVE-2011-3326 CVE-2011-3327
  - fixes #741580 - updated to latest upstream version 0.99.19


author: Jiri Skala <jskala@redhat.com> - 0.99.18-1
changelog:
  - fixes #689852 - CVE-2010-1674 CVE-2010-1675 quagga various flaws
  - fixes #690087 - ripd fails to start
  - fixes #689763 - updated to latest upstream version 0.99.18


author: Jiri Skala <jskala@redhat.com> - 0.99.17-3
changelog:
  - fixes #656681 - using %ghost on files in /var/run and /var/lock
  - removed unused script from spec
  - corrected installing /etc/pam.d


author: Jiri Skala <jskala@redhat.com> - 0.99.16-4
changelog:
  - added license text to subpackages
  - fixes #609931 - quagga : does not adhere to Static Library Packaging Guidelines


author: Jiri Skala <jskala@redhat.com> - 0.99.12-3
changelog:
  - fixed #516005 - Errors installing quagga-0.99.11-2.fc11.i586 with --excludedocs
  - fixed #522787 - quagga: build future versions without PAM


author: Jiri Skala <jskala@redhat.com> - 0.99.12-1
changelog:
  - update to latest upstream version
  - fix #499960 - BGPd in Quagga prior to 0.99.12 has a serious assert problem crashing with ASN4's


author: Jiri Skala <jskala@redhat.com> - 0.99.11-3
changelog:
  - fix #498832 - bgpd crashes on as paths containing more 6 digit as numbers
  - corrected release number


author: Martin Nagy <mnagy@redhat.com> - 0.99.9-6
changelog:
  - fix vtysh.conf owner and group (#416121)
  - fix bpgd IPv6 advertisements, patch from upstream (#429448)


author: Martin Bacovsky <mbacovsk@redhat.com> - 0.99.9-2
changelog:
  - resolves: #376821: ospfd init script looks for ospf6 configuration and lock file
  - resolves: #376841: Usage string in ospf6d init script incorrect


author: Martin Bacovsky <mbacovsk@redhat.com> - 0.99.8-1
changelog:
  - upgrade to new upstream version 0.99.8
  - resolves: #249423: scripts in /etc/rc.d/init.d/* are marked as config files in specfile
  - resolves: #247040: Initscript Review
  - resolves: #249538: Inconsistencies in init scripts
  - resolves: #220531: quagga: non-failsafe install-info usage, info files removed from index on update


author: Martin Bacovsky <mbacovsk@redhat.com> - 0.99.6-1
changelog:
  - upgrade to new upstream 0.99.6
  - Resolves: #233909: quagga: unowned directory
  - removed redundant patches (#226352)


author: Jay Fenlason <fenlason@redhat.com> 0:0.98.6-2
changelog:
  - Upgrade to new upstream version, closing security problems:
    bz#191081 CVE-2006-2223 Quagga RIPd information disclosure
    bz#191085 CVE-2006-2224 Quagga RIPd route injection


author: Jay Fenlason <fenlason@redhat.com> 0.98.5-3
changelog:
  - add the -pie patch, to make -fPIE compiling actually work on all platforms.
  - Include -pam patch to close
    bz#170256 ? pam_stack is deprecated
  - Change ucd-snmp to net-snmp to close
    bz#164333 ? quagga 0.98.4-2 requires now obsolete package ucd-snmp-devel
  - also fix duplicate line mentioned in bz#164333


author: Jay Fenlason <fenlason@redhat.com> 0.98.2-2
changelog:
  - New upstream version, inclues my -gcc4 patch, and a patch from
    Vladimir Ivanov <wawa@yandex-team.ru>


author: Jay Fenlason <fenlason@redhat.com> 0.98.0-2
changelog:
  - New upstream version.  This fixes bz#143796
  - --with-rtadv needs to be --enable-rtadv according to configure.
    (but it was enabled by default, so this is a cosmetic change only)
    Change /etc/logrotate.d/* to /etc/logrotate.d/quagga in this spec file.
  - Modify this spec file to move the .so files to the base package
    and close bz#140894
  - Modify this spec file to separate out macro <_includedir>/quagga/ospfd
    from .../*.h and macro <_includedir>/quagga/ospfapi from .../*.h
    Rpmbuild probably shouldn't allow macro <dir> of a plain file.


author: Tim Waugh <twaugh@redhat.com> 0.97.3-3
changelog:
  - Rebuilt for new readline.
  - Don't explicitly require readline.  The correct dependency is automatically
    picked up by linking against it.


author: Jay Fenlason <fenlason@redhat.com> 0.96.5-0
changelog:
  - New upstream version
  - Change includedir
  - Change the pre scriptlet to fail if the useradd command fails.
  - Remove obsolete patches from this .spec file and renumber the two
    remaining ones.


author: Jay Fenlason <fenlason@redhat.com> 0.96.3-1
changelog:
  - Patch a remote DoS attack (#107140)
  - New upstream version
  - Removed the .libcap patch, which was applied upstream
  - Renamed the vty group from quaggavty to quaggavt because quaggavty is
    too long for NIS.
  - Patch the spec file to fix #106857: /etc/quagga/zebra.conf is created with
    the wrong owner.
  - Removed the "med" part of the 0.96.1-warnings patch for . . .
  - Add a new warnings patch with a fix for #106315.  This also updates
    the "med" part of the previous warnings patch.


author: Jay Fenlason <fenlason@redhat.com> 0.96.2-5
changelog:
  - merge sysconfig patch from 3E branch.  This patch is from Kaj J. Niemi
    (kajtzu@basen.net), and puts Quagga configuration options in
    /etc/sysconfig/quagga, and defaults Quagga to listening on 127.0.0.1 only.
    This closes #104376
  - Use /sbin/nologin for the shell of the quagga user.  This closes #103320
  - Update the quagga-0.96.1-warnings.patch patch to kill a couple more
    warnings.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Remove the directory part of paths for PAM modules in quagga.pam, allowing
    libpam to search its default directory (needed if a 64-bit libpam needs to
    look in /lib64/security instead of /lib/security).


author: Jay Fenlason <fenlason@redhat.com> 0.96.1-3
changelog:
  - Merge from quagga-3E-branch, with a fix for #102673 and a couple
    more compiler warnings quashed.


author: Jay Fenlason <fenlason@redhat.com> 0.96-1
changelog:
  - added a patch (libwrap) to allow the generated Makefiles for zebra/
    and lib/ to work on AMD64 systems.  For some reason make there does
    not like a dependency on -lcap
  - added a patch (warnings) to shut up warnings about an undefined
    structure type in some function prototypes and quiet down all the
    warnings about assert(ptr) on x86_64.
  - Modified the upstream quagga-0.96/readhat/quagga.spec to work as an
    official Red Hat package (remove user and group creation and changes
    to services)
  - Trimmed changelog.  See the upstream .spec file for previous
    changelog entries.


author: Peter Hutterer <peter.hutterer@redhat.com> 1.1.2-3
changelog:
  - Drop xorg-x11-util-macros build requires, not needed anymore
  - Don't build on s390 (or ppc, if on RHEL)
  - Force autoreconf to avoid libtool errors


author: Petr Šabata <contyk@redhat.com> - 0.621-1
changelog:
  - 0.621 bump
  - Lots of bugfixes
  - Packaging examples
  - Fixing build-time deps and removing unneeded lines
  - Fixing changelog issues


author: Mike A. Harris <mharris@redhat.com> 0.1.0.4-1
changelog:
  - Updated xorg-x11-drv-dummy to version 0.1.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Update BuildRoot to use Fedora Packaging Guidelines.
  - Deglob file manifest.
  - Add alpha/sparc/sparc64 to "ExclusiveArch"


author: Mike A. Harris <mharris@redhat.com> 0.1.0-0
changelog:
  - Initial spec file for dummy video driver generated automatically
    by my xorg-driverspecgen script.


author: Hans de Goede <hdegoede@redhat.com> - 1.1.2-3
changelog:
  - Pass --with-fontrootdir to ./configure so that libfontenc can find the
    encoding files (rhbz#1046341)


author: Mike A. Harris <mharris@redhat.com> 1.0.2-2
changelog:
  - Remove package ownership of mandir/libdir/etc.
  - Added "BuildRequires: autoconf" temporarily as long as autoconf is needed


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated libfontenc to version 1.0.0 from X11R7 RC4
  - Added libfontenc-1.0.0-get-fontdir-from-pkgconfig.patch which now replaces
    libfontenc-0.99.2-use-datadir-for-encodings.patch by using pkgconfig to
    query fontutil.pc for fontdir.
  - Added "BuildRequires: font-utils >= 1.0.0" to find fontutil.pc
  - Removed libfontenc-0.99.2-use-datadir-for-encodings.patch


author: Mike A. Harris <mharris@redhat.com> 0.99.3-1
changelog:
  - Updated libfontenc to version 0.99.3 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Added libfontenc-0.99.2-use-datadir-for-encodings.patch and invoke aclocal
    and automake to activate the changes.  This fixes a bug reported against
    mkfontscale, in which it looks in _datadir for the font encodings files,
    which was traced back to libfontenc (#173875).
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-2" to ensure that
    /usr/include/X11 is a directory rather than a symlink before this package
    gets installed, to avoid bug (#173384).


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libfontenc to version 0.99.2 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Rex Dieter <rdieter@fedoraproject.org> 4.9.97-4
changelog:
  - manually specify PYTHON_LIBRARIES again, fixes regression that tries
    to load libpython<foo>.so from python<foo>-devel


author: Honggang Li <honli@redhat.com> - 3.3.15-3
changelog:
  - Package up libosmcomp.so.3* to fix dependency issue after rebase
    opensm to release 3.3.21
  - Resolves: bz1670692


author: Doug Ledford <dledford@redhat.com> - 3.3.5-3
changelog:
  - Change the file spec so we don't accidentally pick up the debug files in
    the base package on 32bit arches
  - Resolves: bz732495


author: Doug Ledford <dledford@redhat.com> - 3.3.5-2
changelog:
  - Drop libibmad as it didn't soname bump, and also remove the lower level
    opensm libs, libosm{comp,vendor} as they didn't soname bump either
  - Related: bz725016


author: Simone Caronni <negativo17@gmail.com> - 1.1.0-9
changelog:
  - Added patches for file transfer and status time workaround:
    http://www.lilotux.net/~mikael/pub/meanwhile/
  - Spec file formatting.


author: Debarshi Ray <rishi@fedoraproject.org> - 1:5.14.1-5
changelog:
  - Add %check to run the upstream test suite on each build (Red Hat #1000705)
  - Resort to using chrpath for removing rpaths instead of hacking libtool


author: Brian Pepple <bpepple@fedoraproject.org> - 1:5.14.1-1
changelog:
  - Update to 5.14.1.
  - Drop defattr. No longer needed.
  - Drop ignore gnome keyring patch. Fixed upstream.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:7.0-1
changelog:
  - smartmontools updated to 7.0 (#1588532)
  - fixed detection of Device Statistics log with 256 sectors (#1590190)


author: Michal Hlavinka <mhlavink@redhat.com> - 1:6.5-1
changelog:
  - smartmontools updated to 6.5
  - adds support for NVMe devices (#1369731)
  - minor spec cleanup (#1463148)


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.37-6
changelog:
  - fix #271741 - smartd-conf.py should allow customization of parameters
  - fix #253753 - service starting by default, perhaps shouldn't
  - update initscript (related #247058 - initscript review)


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.37-5
changelog:
  - add support for 24 disks on 3ware RAID controllers (related #252055)
  - fix #245442 - add %{arm} to smartmontools's set of build archs
  - update license tag


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.37-4
changelog:
  - fix #241389 - smartd-conf.py pulls in a big dependency chain, so
    build a separate config package


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.37-3
changelog:
  - fix #241385 - smartmontools missing dependency on mailx
  - fix #241388 - unneeded smartd-conf.py[co] installed in /usr/sbin


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-5
changelog:
  - set cloexec on device descriptor so it doesn't leak to sendmail (#214182)
  - fixed minor bug in initscript (#213683)
  - backported SATA disk detection from upstream


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-2
changelog:
  - kudzu is deprecated, replace it with HAL (#195752)
  - moved later in the boot process so haldaemon is already running
    when drives are being detected


author: Tomas Mraz <tmraz@redhat.com> - 1:5.33-5
changelog:
  - add default /etc/sysconfig/smartmontools file
  - ignore errors on startup (#186130)
  - test drive for SMART support before adding it to smartd.conf


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-3
changelog:
  - add libata disks with -d ata if the libata version
    is new enough otherwise do not add them (#145859, #174095)


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-2
changelog:
  - Spec file cleanup by Robert Scheck <redhat@linuxnetz.de> (#170959)
  - manual release numbering
  - remove bogus patch of non-installed file
  - only non-removable drives should be added to smartd.conf
  - smartd.conf should be owned (#171498)


author: Nathan Scott <nathans@redhat.com> - 0.6.2-1
changelog:
  - Switch to enabling the Java 8+ maven modules only now.
  - Add unitsofmeasurement prefix to package name.
  - Update to latest upstream sources.


author: Parag Nemade <pnemade AT redhat DOT com> - 1.1.13-5
changelog:
  - Resolves:rh#803571-[Punjabi-Jhelum] Addition to keyboard layout
  - Resolves:rh#815385-[kn_IN] Add Kannada typewriter keyboard layout
  - Resolves:rh#803652-Inscript2 for Bengali contains a wrong key mapping
  - Resolves:rh#804898-[bn_IN] Add missing 'z' key mapping in inscript2 keymap
  - Resolves:rh#803207-(as_IN)Instead of Assamese ra (u09f0) Bengali ra (u09b0) is mapped
  - Resolves:rh#803236-(as_IN)Letter 'ma' (ম) and 'wa' (ৱ) not mapped for Assamese


author: Parag Nemade <pnemade AT redhat DOT com> - 1.1.12-4
changelog:
  - Resolves: rh#679289 - please include kashmiri inscript keyboard
  - Removed Obsoletes and Provides added in f14


author: Parag Nemade <pnemade@redhat.com> -1.1.10-1
changelog:
  - update to new upstream release 1.1.10 
  - Resolves: rh#513920: [pa_IN]Jhelum layout conflict with shortcut key in lokalize
  - revert pa-jhelum-numeric-503478.patch to its original version.


author: Parag Nemade <pnemade@redhat.com> -1.1.9-4
changelog:
  - Resolves: rh#494810-[indic][m17n-db][m17n-contrib] ibus .engine files no longer needed for new ibus


author: Parag Nemade <pnemade@redhat.com> -1.1.9-2
changelog:
  - Resolves: rh#491794 [mai_IN] Removing @maithili-support removes m17n-db-hindi package
  - Resolves: rh#493793 [mai_IN] No default keymap for language


author: Parag Nemade <pnemade@redhat.com> - 1.1.3-3
changelog:
  - Added m17n-contrib as Requires for mk_pkg() macro generating packages.
  - Added m17b-contrib and m17n-db-lang as Requires
    for mk_pkg_uses_db() macro generating packages.


author: Eric Garver <egarver@redhat.com> - 1.2-7
changelog:
  - libndp: add option flags to send messages
  - ndptool: add option to send messages types
  - libndp: fix type of field "na" in "struct ndp_msgna"
  - libndp: revert API change for ndp_msg_send() and add


author: Lubomir Rintel <lrintel@redhat.com> - 1.2-5
changelog:
  - libndp: validate the IPv6 hop limit [CVE-2016-3698]
  - libndb: reject redirect and router advertisements from non-link-local [CVE-2016-3698]


author: Jiri Pirko <jpirko@redhat.com> - 1.2-3
changelog:
  - libndp: fix [cppcheck] Undefined behavior: Variable 'buf' is used as parameter and destination in s[n]printf() [1044084]


author: Jiri Pirko <jpirko@redhat.com> - 1.2-1
changelog:
  - Update to 1.2
  - libndp: silently ignore packets with optlen 0 [1016064]
  - libndp: fix processing for larger options [1016064]
  - libndp: do not fail on receiving non-ndp packets [1016078]


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.1-1
changelog:
  - 3.2.1 (2013-05-11)
  - ==================
  -
  - Features added
  - --------------
  -
  - * The methods ``apply_templates()`` and ``process_children()`` of XSLT
  -   extension elements have gained two new boolean options ``elements_only``
  -   and ``remove_blank_text`` that discard either all strings or
  -   whitespace-only strings from the result list.
  -
  - Bugs fixed
  - ----------
  -
  - * When moving Elements to another tree, the namespace cleanup mechanism
  -   no longer drops namespace prefixes from attributes for which it finds
  -   a default namespace declaration, to prevent them from appearing as
  -   unnamespaced attributes after serialisation.
  -
  - * Returning non-type objects from a custom class lookup method could lead
  -   to a crash.
  -
  - * Instantiating and using subtypes of Comments and ProcessingInstructions
  -   crashed.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.0-1
changelog:
  - 3.2.0 (2013-04-28)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#690319: Leading whitespace could change the behaviour of the string
  -   parsing functions in ``lxml.html``.
  -
  - * LP#599318: The string parsing functions in ``lxml.html`` are more robust
  -   in the face of uncommon HTML content like framesets or missing body tags.
  -   Patch by Stefan Seelmann.
  -
  - * LP#712941: I/O errors while trying to access files with paths that
  -   contain non-ASCII characters could raise ``UnicodeDecodeError`` instead
  -   of properly reporting the ``IOError``.
  -
  - * LP#673205: Parsing from in-memory strings disabled network access in the
  -   default parser and made subsequent attempts to parse from a URL fail.
  -
  - * LP#971754: lxml.html.clean appends 'nofollow' to 'rel' attributes instead
  -   of overwriting the current value.
  -
  - * LP#715687: lxml.html.clean no longer discards scripts that are explicitly
  -   allowed by the user provided whitelist.  Patch by Christine Koppelt.
  -
  - 3.1.2 (2013-04-12)
  - ==================
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1136509: Passing attributes through the namespace-unaware API of
  -   the sax bridge (i.e. the ``handler.startElement()`` method) failed
  -   with a ``TypeError``.  Patch by Mike Bayer.
  -
  - * LP#1123074: Fix serialisation error in XSLT output when converting
  -   the result tree to a Unicode string.
  -
  - * GH#105: Replace illegal usage of ``xmlBufLength()`` in libxml2 2.9.0
  -   by properly exported API function ``xmlBufUse()``.
  -
  - 3.1.1 (2013-03-29)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1160386: Write access to ``lxml.html.FormElement.fields`` raised
  -   an AttributeError in Py3.
  -
  - * Illegal memory access during cleanup in incremental xmlfile writer.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``lxml.etree._BaseParser`` was removed
  -   from the module dict.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.1.0-1
changelog:
  - 3.1.0 (2013-02-10)
  - ==================
  -
  - Features added
  - --------------
  -
  - * GH#89: lxml.html.clean allows overriding the set of attributes that it
  -   considers 'safe'.  Patch by Francis Devereux.
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1104370: ``copy.copy(el.attrib)`` raised an exception.  It now returns
  -   a copy of the attributes as a plain Python dict.
  -
  - * GH#95: When used with namespace prefixes, the  ``el.find*()`` methods
  -   always used the first namespace mapping that was provided for each
  -   path expression instead of using the one that was actually passed
  -   in for the current run.
  -
  - * LP#1092521, GH#91: Fix undefined C symbol in Python runtimes compiled
  -   without threading support.  Patch by Ulrich Seidl.
  -
  - Other changes
  - -------------
  -
  -
  - 3.1beta1 (2012-12-21)
  - =====================
  -
  - Features added
  - --------------
  -
  - * New build-time option ``--with-unicode-strings`` for Python 2 that
  -   makes the API always return Unicode strings for names and text
  -   instead of byte strings for plain ASCII content.
  -
  - * New incremental XML file writing API ``etree.xmlfile()``.
  -
  - * E factory in lxml.objectify is callable to simplify the creation of
  -   tags with non-identifier names without having to resort to getattr().
  -
  - Bugs fixed
  - ----------
  -
  - * When starting from a non-namespaced element in lxml.objectify, searching
  -   for a child without explicitly specifying a namespace incorrectly found
  -   namespaced elements with the requested local name, instead of restricting
  -   the search to non-namespaced children.
  -
  - * GH#85: Deprecation warnings were fixed for Python 3.x.
  -
  - * GH#33: lxml.html.fromstring() failed to accept bytes input in Py3.
  -
  - * LP#1080792: Static build of libxml2 2.9.0 failed due to missing file.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``_ObjectifyElementMakerCaller`` was
  -   removed from the module API of lxml.objectify.
  -
  - * LP#1075622: lxml.builder is faster for adding text to elements with
  -   many children.  Patch by Anders Hammarquist.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0.1-1
changelog:
  - 3.0.1 (2012-10-14)
  - Bugs fixed
  -
  -  * LP#1065924: Element proxies could disappear during garbage collection
  -    in PyPy without proper cleanup.
  -  * GH#71: Failure to work with libxml2 2.6.x.
  -  * LP#1065139: static MacOS-X build failed in Py3.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0-1
changelog:
  - 3.0 (2012-10-08)
  - ================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * End-of-file handling was incorrect in iterparse() when reading from
  -   a low-level C file stream and failed in libxml2 2.9.0 due to its
  -   improved consistency checks.
  -
  - Other changes
  - -------------
  -
  - * The build no longer uses Cython by default unless the generated C files
  -   are missing.  To use Cython, pass the option "--with-cython".  To ignore
  -   the fatal build error when Cython is required but not available (e.g. to
  -   run special setup.py commands that do not actually run a build), pass
  -   "--without-cython".
  -
  -
  - 3.0beta1 (2012-09-26)
  - =====================
  -
  - Features added
  - --------------
  -
  - * Python level access to (optional) libxml2 memory debugging features
  -   to simplify debugging of memory leaks etc.
  -
  - Bugs fixed
  - ----------
  -
  - * Fix a memory leak in XPath by switching to Cython 0.17.1.
  -
  - * Some tests were adapted to work with PyPy.
  -
  - Other changes
  - -------------
  -
  - * The code was adapted to work with the upcoming libxml2 2.9.0 release.
  -
  -
  - 3.0alpha2 (2012-08-23)
  - ======================
  -
  - Features added
  - --------------
  -
  - * The .iter() method of elements now accepts tag arguments like "{*}name"
  -   to search for elements with a given local name in any namespace.  With
  -   this addition, all combinations of wildcards now work as expected:
  -   "{ns}name", "{}name", "{*}name", "{ns}*", "{}*" and "{*}*".  Note that
  -   "name" is equivalent to "{}name", but "*" is "{*}*".  The same change
  -   applies to the .getiterator(), .itersiblings(), .iterancestors(),
  -   .iterdescendants(), .iterchildren() and .itertext() methods,  the
  -   strip_attributes(), strip_elements() and strip_tags() functions as well
  -   as the iterparse() function.
  -
  - * C14N allows specifying the inclusive prefixes to be promoted to
  -   top-level during exclusive serialisation.
  -
  - Bugs fixed
  - ----------
  -
  - * Passing long Unicode strings into the feed() parser interface failed to
  -   read the entire string.
  -
  - Other changes
  - -------------
  -
  -
  - 3.0alpha1 (2012-07-31)
  - ======================
  -
  - Features added
  - --------------
  -
  - * Initial support for building in PyPy (through cpyext).
  -
  - * DTD objects gained an API that allows read access to their
  -   declarations.
  -
  - * xpathgrep.py gained support for parsing line-by-line (e.g.
  -   from grep output) and for surrounding the output with a new root
  -   tag.
  -
  - * E-factory in lxml.builder accepts subtypes of known data
  -   types (such as string subtypes) when building elements around them.
  -
  - * Tree iteration and iterparse() with a selective tag
  -   argument supports passing a set of tags.  Tree nodes will be
  -   returned by the iterators if they match any of the tags.
  -
  - Bugs fixed
  - ----------
  -
  - * The .find*() methods in lxml.objectify no longer use XPath
  -   internally, which makes them faster in many cases (especially when
  -   short circuiting after a single or couple of elements) and fixes
  -   some behavioural differences compared to lxml.etree.  Note that
  -   this means that they no longer support arbitrary XPath expressions
  -   but only the subset that the ElementPath language supports.
  -   The previous implementation was also redundant with the normal
  -   XPath support, which can be used as a replacement.
  -
  - * el.find('*') could accidentally return a comment or processing
  -   instruction that happened to be in the wrong spot.  (Same for the
  -   other .find*() methods.)
  -
  - * The error logging is less intrusive and avoids a global setup where
  -   possible.
  -
  - * Fixed undefined names in html5lib parser.
  -
  - * xpathgrep.py did not work in Python 3.
  -
  - * Element.attrib.update() did not accept an attrib of
  -   another Element as parameter.
  -
  - * For subtypes of ElementBase that make the .text or .tail
  -   properties immutable (as in objectify, for example), inserting text
  -   when creating Elements through the E-Factory feature of the class
  -   constructor would fail with an exception, stating that the text
  -   cannot be modified.
  -
  - Other changes
  - --------------
  -
  - * The code base was overhauled to properly use 'const' where the API
  -   of libxml2 and libxslt requests it.  This also has an impact on the
  -   public C-API of lxml itself, as defined in etreepublic.pxd, as
  -   well as the provided declarations in the lxml/includes/ directory.
  -   Code that uses these declarations may have to be adapted.  On the
  -   plus side, this fixes several C compiler warnings, also for user
  -   code, thus making it easier to spot real problems again.
  -
  - * The functionality of "lxml.cssselect" was moved into a separate PyPI
  -   package called "cssselect".  To continue using it, you must install
  -   that package separately.  The "lxml.cssselect" module is still
  -   available and provides the same interface, provided the "cssselect"
  -   package can be imported at runtime.
  -
  - * Element attributes passed in as an attrib dict or as keyword
  -   arguments are now sorted by (namespaced) name before being created
  -   to make their order predictable for serialisation and iteration.
  -   Note that adding or deleting attributes afterwards does not take
  -   that order into account, i.e. setting a new attribute appends it
  -   after the existing ones.
  -
  - * Several classes that are for internal use only were removed
  -   from the lxml.etree module dict:
  -   _InputDocument, _ResolverRegistry, _ResolverContext, _BaseContext,
  -   _ExsltRegExp, _IterparseContext, _TempStore, _ExceptionContext,
  -   __ContentOnlyElement, _AttribIterator, _NamespaceRegistry,
  -   _ClassNamespaceRegistry, _FunctionNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _ParserContext, _PythonSaxParserTarget,
  -   _TargetParserContext, _ReadOnlyProxy, _ReadOnlyPIProxy,
  -   _ReadOnlyEntityProxy, _ReadOnlyElementProxy, _OpaqueNodeWrapper,
  -   _OpaqueDocumentWrapper, _ModifyContentOnlyProxy,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _SaxParserContext, _FilelikeWriter,
  -   _ParserSchemaValidationContext, _XPathContext,
  -   _XSLTResolverContext, _XSLTContext, _XSLTQuotedStringParam
  -
  - * Several internal classes can no longer be inherited from:
  -   _InputDocument, _ResolverRegistry, _ExsltRegExp, _ElementUnicodeResult,
  -   _IterparseContext, _TempStore, _AttribIterator, _ClassNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _PythonSaxParserTarget, _TargetParserContext,
  -   _ReadOnlyPIProxy, _ReadOnlyEntityProxy, _OpaqueDocumentWrapper,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _FilelikeWriter, _ParserSchemaValidationContext,
  -   _XPathContext, _XSLTResolverContext, _XSLTContext,
  -   _XSLTQuotedStringParam, _XSLTResultTree, _XSLTProcessingInstruction


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.5-1
changelog:
  - Bugs fixed
  -
  -  * Crash when merging text nodes in element.remove().
  -  * Crash in sax/target parser when reporting empty doctype.


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.4-1
changelog:
  - Bugs fixed
  -
  -  * Crash when building an nsmap (Element property) with empty namespace
  -    URIs.
  -  * Crash due to race condition when errors (or user messages) occur during
  -    threaded XSLT processing (or compilation).
  -  * XSLT stylesheet compilation could ignore compilation errors.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3.3-1
changelog:
  - 2.3.3 (2012-01-04)
  - Features added
  -
  -  * lxml.html.tostring() gained new serialisation options with_tail and
  -    doctype.
  -
  - Bugs fixed
  -
  -  * Fixed a crash when using iterparse() for HTML parsing and requesting
  -    start events.
  -  * Fixed parsing of more selectors in cssselect. Whitespace before pseudo-
  -    elements and pseudo-classes is significant as it is a descendant
  -    combinator. "E :pseudo" should parse the same as "E *:pseudo", not
  -    "E:pseudo". Patch by Simon Sapin.
  -  * lxml.html.diff no longer raises an exception when hitting 'img' tags
  -    without 'src' attribute.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3.2-1
changelog:
  - 2.3.2 (2011-11-11)
  - Features added
  -
  -   * lxml.objectify.deannotate() has a new boolean option
  -     cleanup_namespaces to remove the objectify namespace declarations
  -     (and generally clean up the namespace declarations) after removing
  -     the type annotations.
  -   * lxml.objectify gained its own SubElement() function as a copy of
  -     etree.SubElement to avoid an otherwise redundant import of
  -     lxml.etree on the user side.
  -
  - Bugs fixed
  -
  -    * Fixed the "descendant" bug in cssselect a second time (after a first
  -      fix in lxml 2.3.1). The previous change resulted in a serious
  -      performance regression for the XPath based evaluation of the
  -      translated expression. Note that this breaks the usage of some
  -      of the generated XPath expressions as XSLT location paths that
  -      previously worked in 2.3.1.
  -    * Fixed parsing of some selectors in cssselect. Whitespace after
  -      combinators ">", "+" and "~" is now correctly ignored. Previously
  -      it was parsed as a descendant combinator. For example, "div> .foo"
  -      was parsed the same as "div>* .foo" instead of "div>.foo". Patch by
  -      Simon Sapin.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3.1-1
changelog:
  - Features added
  - --------------
  -
  - * New option kill_tags in lxml.html.clean to remove specific
  -   tags and their content (i.e. their whole subtree).
  -
  - * pi.get() and pi.attrib on processing instructions to parse
  -   pseudo-attributes from the text content of processing instructions.
  -
  - * lxml.get_include() returns a list of include paths that can be
  -   used to compile external C code against lxml.etree.  This is
  -   specifically required for statically linked lxml builds when code
  -   needs to compile against the exact same header file versions as lxml
  -   itself.
  -
  - * Resolver.resolve_file() takes an additional option
  -   close_file that configures if the file(-like) object will be
  -   closed after reading or not.  By default, the file will be closed,
  -   as the user is not expected to keep a reference to it.
  -
  - Bugs fixed
  - ----------
  -
  - * HTML cleaning didn't remove 'data:' links.
  -
  - * The html5lib parser integration now uses the 'official'
  -   implementation in html5lib itself, which makes it work with newer
  -   releases of the library.
  -
  - * In lxml.sax, endElementNS() could incorrectly reject a plain
  -   tag name when the corresponding start event inferred the same plain
  -   tag name to be in the default namespace.
  -
  - * When an open file-like object is passed into parse() or
  -   iterparse(), the parser will no longer close it after use.  This
  -   reverts a change in lxml 2.3 where all files would be closed.  It is
  -   the users responsibility to properly close the file(-like) object,
  -   also in error cases.
  -
  - * Assertion error in lxml.html.cleaner when discarding top-level elements.
  -
  - * In lxml.cssselect, use the xpath 'A//B' (short for
  -   'A/descendant-or-self::node()/B') instead of 'A/descendant::B' for the
  -   css descendant selector ('A B'). This makes a few edge cases to be
  -   consistent with the selector behavior in WebKit and Firefox, and makes
  -   more css expressions valid location paths (for use in xsl:template
  -   match).
  -
  - * In lxml.html, non-selected <option> tags no longer show up in the
  -   collected form values.
  -
  - * Adding/removing <option> values to/from a multiple select form
  -   field properly selects them and unselects them.
  -
  - Other changes
  - --------------
  -
  - * Static builds can specify the download directory with the
  -   --download-dir option.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3-1
changelog:
  - 2.3 (2011-02-06)
  - ================
  -
  - Features added
  - --------------
  -
  - * When looking for children, ``lxml.objectify`` takes '{}tag' as
  -   meaning an empty namespace, as opposed to the parent namespace.
  -
  - Bugs fixed
  - ----------
  -
  - * When finished reading from a file-like object, the parser
  -   immediately calls its ``.close()`` method.
  -
  - * When finished parsing, ``iterparse()`` immediately closes the input
  -   file.
  -
  - * Work-around for libxml2 bug that can leave the HTML parser in a
  -   non-functional state after parsing a severly broken document (fixed
  -   in libxml2 2.7.8).
  -
  - * ``marque`` tag in HTML cleanup code is correctly named ``marquee``.
  -
  - Other changes
  - --------------
  -
  - * Some public functions in the Cython-level C-API have more explicit
  -   return types.
  -
  - 2.3beta1 (2010-09-06)
  - =====================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * Crash in newer libxml2 versions when moving elements between
  -   documents that had attributes on replaced XInclude nodes.
  -
  - * ``XMLID()`` function was missing the optional ``parser`` and
  -   ``base_url`` parameters.
  -
  - * Searching for wildcard tags in ``iterparse()`` was broken in Py3.
  -
  - * ``lxml.html.open_in_browser()`` didn't work in Python 3 due to the
  -   use of os.tempnam.  It now takes an optional 'encoding' parameter.
  -
  - Other changes
  - --------------
  -
  - 2.3alpha2 (2010-07-24)
  - ======================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * Crash in XSLT when generating text-only result documents with a
  -   stylesheet created in a different thread.
  -
  - Other changes
  - --------------
  -
  - * ``repr()`` of Element objects shows the hex ID with leading 0x
  -   (following ElementTree 1.3).
  -
  - 2.3alpha1 (2010-06-19)
  - ======================
  -
  - Features added
  - --------------
  -
  - * Keyword argument ``namespaces`` in ``lxml.cssselect.CSSSelector()``
  -   to pass a prefix-to-namespace mapping for the selector.
  -
  - * New function ``lxml.etree.register_namespace(prefix, uri)`` that
  -   globally registers a namespace prefix for a namespace that newly
  -   created Elements in that namespace will use automatically.  Follows
  -   ElementTree 1.3.
  -
  - * Support 'unicode' string name as encoding parameter in
  -   ``tostring()``, following ElementTree 1.3.
  -
  - * Support 'c14n' serialisation method in ``ElementTree.write()`` and
  -   ``tostring()``, following ElementTree 1.3.
  -
  - * The ElementPath expression syntax (``el.find*()``) was extended to
  -   match the upcoming ElementTree 1.3 that will ship in the standard
  -   library of Python 3.2/2.7.  This includes extended support for
  -   predicates as well as namespace prefixes (as known from XPath).
  -
  - * During regular XPath evaluation, various ESXLT functions are
  -   available within their namespace when using libxslt 1.1.26 or later.
  -
  - * Support passing a readily configured logger instance into
  -   ``PyErrorLog``, instead of a logger name.
  -
  - * On serialisation, the new ``doctype`` parameter can be used to
  -   override the DOCTYPE (internal subset) of the document.
  -
  - * New parameter ``output_parent`` to ``XSLTExtension.apply_templates()``
  -   to append the resulting content directly to an output element.
  -
  - * ``XSLTExtension.process_children()`` to process the content of the
  -   XSLT extension element itself.
  -
  - * ISO-Schematron support based on the de-facto Schematron reference
  -   'skeleton implementation'.
  -
  - * XSLT objects now take XPath object as ``__call__`` stylesheet
  -   parameters.
  -
  - * Enable path caching in ElementPath (``el.find*()``) to avoid parsing
  -   overhead.
  -
  - * Setting the value of a namespaced attribute always uses a prefixed
  -   namespace instead of the default namespace even if both declare the
  -   same namespace URI.  This avoids serialisation problems when an
  -   attribute from a default namespace is set on an element from a
  -   different namespace.
  -
  - * XSLT extension elements: support for XSLT context nodes other than
  -   elements: document root, comments, processing instructions.
  -
  - * Support for strings (in addition to Elements) in node-sets returned
  -   by extension functions.
  -
  - * Forms that lack an ``action`` attribute default to the base URL of
  -   the document on submit.
  -
  - * XPath attribute result strings have an ``attrname`` property.
  -
  - * Namespace URIs get validated against RFC 3986 at the API level
  -   (required by the XML namespace specification).
  -
  - * Target parsers show their target object in the ``.target`` property
  -   (compatible with ElementTree).
  -
  - Bugs fixed
  - ----------
  -
  - * API is hardened against invalid proxy instances to prevent crashes
  -   due to incorrectly instantiated Element instances.
  -
  - * Prevent crash when instantiating ``CommentBase`` and friends.
  -
  - * Export ElementTree compatible XML parser class as
  -   ``XMLTreeBuilder``, as it is called in ET 1.2.
  -
  - * ObjectifiedDataElements in lxml.objectify were not hashable.  They
  -   now use the hash value of the underlying Python value (string,
  -   number, etc.) to which they compare equal.
  -
  - * Parsing broken fragments in lxml.html could fail if the fragment
  -   contained an orphaned closing '</div>' tag.
  -
  - * Using XSLT extension elements around the root of the output document
  -   crashed.
  -
  - * ``lxml.cssselect`` did not distinguish between ``x[attr="val"]`` and
  -   ``x [attr="val"]`` (with a space).  The latter now matches the
  -   attribute independent of the element.
  -
  - * Rewriting multiple links inside of HTML text content could end up
  -   replacing unrelated content as replacements could impact the
  -   reported position of subsequent matches.  Modifications are now
  -   simplified by letting the ``iterlinks()`` generator in ``lxml.html``
  -   return links in reversed order if they appear inside the same text
  -   node.  Thus, replacements and link-internal modifications no longer
  -   change the position of links reported afterwards.
  -
  - * The ``.value`` attribute of ``textarea`` elements in lxml.html did
  -   not represent the complete raw value (including child tags etc.). It
  -   now serialises the complete content on read and replaces the
  -   complete content by a string on write.
  -
  - * Target parser didn't call ``.close()`` on the target object if
  -   parsing failed.  Now it is guaranteed that ``.close()`` will be
  -   called after parsing, regardless of the outcome.
  -
  - Other changes
  - -------------
  -
  - * Official support for Python 3.1.2 and later.
  -
  - * Static MS Windows builds can now download their dependencies
  -   themselves.
  -
  - * ``Element.attrib`` no longer uses a cyclic reference back to its
  -   Element object.  It therefore no longer requires the garbage
  -   collector to clean up.
  -
  - * Static builds include libiconv, in addition to libxml2 and libxslt.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.8-1
changelog:
  - 2.2.8 (2010-09-02)
  - Bugs fixed
  -
  -     * Crash in newer libxml2 versions when moving elements between
  -       documents that had attributes on replaced XInclude nodes.
  -     * Import fix for urljoin in Python 3.1+.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.7-3
changelog:
  - Don't byte-compile files during install because setup.py doesn't
    properly byte compile for Python version 3.2


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.7-1
changelog:
  - 2.2.7 (2010-07-24)
  - Bugs fixed
  -
  -     * Crash in XSLT when generating text-only result documents with a stylesheet created in a different thread.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.6-1
changelog:
  - 2.2.6 (2010-03-02)
  -
  - Bugs fixed
  -
  -    * Fixed several Python 3 regressions by building with Cython 0.11.3.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.5-1
changelog:
  - 2.2.5 (2010-02-28)
  -
  - Features added
  -
  -    * Support for running XSLT extension elements on the input root node
  -      (e.g. in a template matching on "/").
  -
  - Bugs fixed
  -
  -    * Crash in XPath evaluation when reading smart strings from a document
  -      other than the original context document.
  -    * Support recent versions of html5lib by not requiring its XHTMLParser
  -      in htmlparser.py anymore.
  -    * Manually instantiating the custom element classes in lxml.objectify
  -      could crash.
  -    * Invalid XML text characters were not rejected by the API when they
  -      appeared in unicode strings directly after non-ASCII characters.
  -    * lxml.html.open_http_urllib() did not work in Python 3.
  -    * The functions strip_tags() and strip_elements() in lxml.etree did
  -      not remove all occurrences of a tag in all cases.
  -    * Crash in XSLT extension elements when the XSLT context node is not
  -      an element.


author: Thomas Spura <tomspur@fedoraproject.org> - 2.2.4-2
changelog:
  - update to current python3 guidelines
  - be more explicit in %files
  - use %global and not %define
  - create docs subpackage
  - add stripping 3-byte Byte Order Marker from src/lxml/tests/test_errors.py
    to get 2to3 to work (dmalcolm)
  - fixes FTBFS (#564674)


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.3-1
changelog:
  - 2.2.3 (2009-10-30)
  - Bugs fixed
  -
  -    * The resolve_entities option did not work in the incremental feed
  -      parser.
  -    * Looking up and deleting attributes without a namespace could hit a
  -      namespaced attribute of the same name instead.
  -    * Late errors during calls to SubElement() (e.g. attribute related
  -      ones) could leave a partially initialised element in the tree.
  -    * Modifying trees that contain parsed entity references could result
  -      in an infinite loop.
  -    * ObjectifiedElement.__setattr__ created an empty-string child element
  -      when the attribute value was rejected as a non-unicode/non-ascii
  -      string
  -    * Syntax errors in lxml.cssselect could result in misleading error
  -      messages.
  -    * Invalid syntax in CSS expressions could lead to an infinite loop in
  -      the parser of lxml.cssselect.
  -    * CSS special character escapes were not properly handled in
  -      lxml.cssselect.
  -    * CSS Unicode escapes were not properly decoded in lxml.cssselect.
  -    * Select options in HTML forms that had no explicit value attribute
  -      were not handled correctly. The HTML standard dictates that their
  -      value is defined by their text content. This is now supported by
  -      lxml.html.
  -    * XPath raised a TypeError when finding CDATA sections. This is now
  -      fully supported.
  -    * Calling help(lxml.objectify) didn't work at the prompt.
  -    * The ElementMaker in lxml.objectify no longer defines the default
  -      namespaces when annotation is disabled.
  -    * Feed parser failed to honour the 'recover' option on parse errors.
  -    * Diverting the error logging to Python's logging system was broken.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.2-1
changelog:
  - 2.2.2 (2009-06-21)
  - Features added
  -
  -    * New helper functions strip_attributes(), strip_elements(),
  -      strip_tags() in lxml.etree to remove attributes/subtrees/tags
  -      from a subtree.
  -
  - Bugs fixed
  -
  -    * Namespace cleanup on subtree insertions could result in missing
  -      namespace declarations (and potentially crashes) if the element
  -      defining a namespace was deleted and the namespace was not used
  -      by the top element of the inserted subtree but only in deeper
  -      subtrees.
  -    * Raising an exception from a parser target callback didn't always
  -      terminate the parser.
  -    * Only {true, false, 1, 0} are accepted as the lexical representation
  -      for BoolElement ({True, False, T, F, t, f} not any more), restoring
  -      lxml <= 2.0 behaviour.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.1-1
changelog:
  - 2.2.1 (2009-06-02)
  - Features added
  -
  -    * Injecting default attributes into a document during XML Schema
  -      validation (also at parse time).
  -    * Pass huge_tree parser option to disable parser security restrictions
  -      imposed by libxml2 2.7.
  -
  - Bugs fixed
  -
  -    * The script for statically building libxml2 and libxslt didn't work
  -      in Py3.
  -    * XMLSchema() also passes invalid schema documents on to libxml2 for
  -      parsing (which could lead to a crash before release 2.6.24).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-1
changelog:
  - 2.2 (2009-03-21)
  - Features added
  -
  -    * Support for standalone flag in XML declaration through
  -      tree.docinfo.standalone and by passing standalone=True/False on
  -      serialisation.
  -
  - Bugs fixed
  -
  -    * Crash when parsing an XML Schema with external imports from a
  -      filename.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.8.beta4
changelog:
  - 2.2beta4 (2009-02-27)
  - Features added
  -
  -    * Support strings and instantiable Element classes as child arguments
  -      to the constructor of custom Element classes.
  -    * GZip compression support for serialisation to files and file-like
  -      objects.
  -
  - Bugs fixed
  -
  -    * Deep-copying an ElementTree copied neither its sibling PIs and
  -      comments nor its internal/external DTD subsets.
  -    * Soupparser failed on broken attributes without values.
  -    * Crash in XSLT when overwriting an already defined attribute using
  -      xsl:attribute.
  -    * Crash bug in exception handling code under Python 3. This was due to
  -      a problem in Cython, not lxml itself.
  -    * lxml.html.FormElement._name() failed for non top-level forms.
  -    * TAG special attribute in constructor of custom Element classes was
  -      evaluated incorrectly.
  -
  - Other changes
  -
  -    * Official support for Python 3.0.1.
  -    * Element.findtext() now returns an empty string instead of None for
  -      Elements without text content.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.6.beta3
changelog:
  - 2.2beta3 (2009-02-17)
  - Features added
  -
  -    * XSLT.strparam() class method to wrap quoted string parameters that
  -     require escaping.
  -
  - Bugs fixed
  -
  -    * Memory leak in XPath evaluators.
  -    * Crash when parsing indented XML in one thread and merging it with
  -      other documents parsed in another thread.
  -    * Setting the base attribute in lxml.objectify from a unicode string
  -      failed.
  -    * Fixes following changes in Python 3.0.1.
  -    * Minor fixes for Python 3.
  -
  - Other changes
  -
  -    * The global error log (which is copied into the exception log) is now
  -      local to a thread, which fixes some race conditions.
  -    * More robust error handling on serialisation.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.5.beta2
changelog:
  - 2.2beta2 (2009-01-25)
  - Bugs fixed
  -
  -    * Potential memory leak on exception handling. This was due to a
  -      problem in Cython, not lxml itself.
  -    * iter_links (and related link-rewriting functions) in lxml.html would
  -      interpret CSS like url("link") incorrectly (treating the quotation
  -      marks as part of the link).
  -    * Failing import on systems that have an io module.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.4.beta1
changelog:
  - 2.2beta1 (2008-12-12)
  - Features added
  -
  -    * Allow lxml.html.diff.htmldiff to accept Element objects,
  -      not just HTML strings.
  -
  - Bugs fixed
  -
  -    * Crash when using an XPath evaluator in multiple threads.
  -    * Fixed missing whitespace before Link:... in lxml.html.diff.
  -
  - Other changes
  -
  -    * Export lxml.html.parse.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.1.alpha1
changelog:
  - 2.2alpha1 (2008-11-23)
  - Features added
  -
  -    * Support for XSLT result tree fragments in XPath/XSLT extension
  -      functions.
  -    * QName objects have new properties namespace and localname.
  -    * New options for exclusive C14N and C14N without comments.
  -    * Instantiating a custom Element classes creates a new Element.
  -
  - Bugs fixed
  -
  -    * XSLT didn't inherit the parse options of the input document.
  -    * 0-bytes could slip through the API when used inside of Unicode
  -      strings.
  -    * With lxml.html.clean.autolink, links with balanced parenthesis, that
  -      end in a parenthesis, will be linked in their entirety (typical with
  -      Wikipedia links).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.1.3-1
changelog:
  - 2.1.3 (2008-11-17)
  - Bugs fixed
  -
  -    * Ref-count leaks when lxml enters a try-except statement while an
  -      outside exception lives in sys.exc_*(). This was due to a problem
  -      in Cython, not lxml itself.
  -    * Parser Unicode decoding errors could get swallowed by other
  -      exceptions.
  -    * Name/import errors in some Python modules.
  -    * Internal DTD subsets that did not specify a system or public ID
  -      were not serialised and did not appear in the docinfo property
  -      of ElementTrees.
  -    * Fix a pre-Py3k warning when parsing from a gzip file in Py2.6.
  -    * Test suite fixes for libxml2 2.7.
  -    * Resolver.resolve_string() did not work for non-ASCII byte strings.
  -    * Resolver.resolve_file() was broken.
  -    * Overriding the parser encoding didn't work for many encodings.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.1.2-1
changelog:
  - 2.1.2 (2008-09-05)
  - Features added
  -
  -    * lxml.etree now tries to find the absolute path name of files when
  -      parsing from a file-like object. This helps custom resolvers when
  -      resolving relative URLs, as lixbml2 can prepend them with the path of
  -      the source document.
  -
  - Bugs fixed
  -
  -    * Memory problem when passing documents between threads.
  -    * Target parser did not honour the recover option and raised an exception
  -      instead of calling .close() on the target.


author: Rob Crittenden <rcritten@redhat.com> - 1.0.3-20
changelog:
  - Clean up semaphore in crlhelper on shutdown (#1326840)
  - Update URL to https://fedorahosted.org/mod_revocator/


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.3-17
changelog:
  - Add the following explanation to the 'Brewtap results' textbox in rpmdiff:
    The '/etc/httpd/conf.d/revocator.conf' file does not require a man page
    because its parameters are sufficiently documented within the
    configuration file itself.
    The '/etc/httpd/conf.modules.d/11-revocator.conf' file does not require
    a man page because the file merely contains the line
    'LoadModule rev_module modules/mod_rev.so' to support httpd
    loading of Dynamic Shared Objects ('/etc/httpd/conf/httpd.conf').


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.3-16
changelog:
  - Bugzilla Bug #948875 - Man page scan results for mod_revocator
  - Moved 'ldapget' from %bindir to %sbindir (provided compatibility link)
  - Moved 'crlhelper' from %bindir to %libexecdir (provided compatibility link)


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.3-14
changelog:
  - Bugzilla Bug #861999 - mod_revocator exec CLR URIs fail to load: unable to
    load Revocation module, NSS error -8187 - stephen.capstick64@gmail.com
    (mod_revocator-waitpid.patch)


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.3-9
changelog:
  - Bugzilla Bug #716874 - httpd (32 bit) failed to start if mod_revocator
    (32 bit) is installed on ppc64


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.3-7
changelog:
  - Bugzilla Bug #716355 - mod_revocator does not shut down httpd server if
    expired CRL is fetched
  - Bugzilla Bug #716361 - mod_revocator does not bring down httpd server if
    CRLUpdate fails


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.3-6
changelog:
  - Bugzilla Bug #737556 - CRLS are not downloaded when mod_revocator module
    is loaded successfully. And no error was thrown in httpd error_log -
    mharmsen
  - Add 'autoreconf -fvi' to build section - mharmsen
  - Fix shutting down Apache if CRLUpdateCritical is on and a CRL
    is not available at startup (#654378) - rcritten@redhat.com
  - Updated mod_revocator-kill patch. The ownership of the semaphore used to
    control access to crlhelper was not always changed to the Apache user
    (#648546) - rcritten@redhat.com
  - Actually apply the patch (#648546) - rcritten@redhat.com
  - Fix killing the web server if updatecritical is set (#648546) -
    rcritten@redhat.com


author: Rob Crittenden <rcritten@redhat.com> 1.0.2-4
changelog:
  - The nss package changed the location of the NSS shared libraries to /lib from
    /usr/lib. Static libraries remained in /usr/lib. They then updated their
    devel package to put symlinks back from /lib to /usr. Respin to pick that up.
    BZ 434395.


author: Ondrej Holy <oholy@redhat.com> - 3.14.1-1
changelog:
  - Update to 3.14.1
  - Remove obsolete upstream patch
  - Add translations updates from upstream
  - Resolves: #1174557


author: Rui Matos <rmatos@redhat.com> - 3.3.3-1
changelog:
  - Update to 3.3.3
  - Just list %{_datadir}/help/xx_YY/baobab in %files since %find_lang
    doesn't find those for us


author: Phil Sutter <psutter@redhat.com> - 1.4.4-5
changelog:
  - Add git commit info to IPv6 NAT support patch
  - Backport: conntrackd: helpers: dhcpv6: Fix potential array overrun
  - Backport: nfct: Drop dead code in nfct_timeout_parse_params()
  - Backport: src: Fix for implicit-fallthrough warnings


author: Paul Wouters <pwouters@redhat.com> - 1.4.4-4
changelog:
  - Resolves: rhbz#1578059 Greatest NVR version of conntrack-tools for ppc64le and x86_64 are different


author: Paul Wouters <pwouters@redhat.com> - 1.4.4-3
changelog:
  - Resolves: rhbz#1425552 (explicitely Require: libnetfilter_conntrack >= 1.0.6 as it is same .so version)


author: Paul Wouters <pwouters@redhat.com> - 1.4.2-8
changelog:
  - Resolves: rhbz#CVE-2015-6496
  - Fold in upstream patches since 1.4.2 release up to git 900d7e8
  - Fold in upstream patch set of 2015-08-18 for coverity issues


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-5
changelog:
  - patch: calculate alignment offset correctly for LUKS2 devices.
  - patch: fix memory leak in LUKS2 validation.
  - Resolves: #1613953 #1693592


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-4
changelog:
  - patch: Fix broken LUKS2 api test.
  - patch: Allow cryptsetup to process all LUKS2 metadata variants
    according to LUKS2 specifiation.
  - Resolves: #1653388


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-3
changelog:
  - Add expected permissions explicitly for locking directory.
  - Reinstate sed script removing library rpath from libtool
    script due to bug in upstream sources distribution.
  - Resolves: #1609847 #1610379


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-2
changelog:
  - patch: stop LUKS2 auto-recovery if device is no longer LUKS
    type
  - patch: update cryptsetup man page for --type option
  - patch: rephrase error message for invalid --type option in
    convert action
  - Resolves: #1599281 #1601477 #1601481


author: Ondrej Kozina <okozina@redhat.com> - 1.7.4-4
changelog:
  - patch: fix regression in blockwise functions
  - patch: avoid repeating error messages when device holders
    detected.
  - patch: add option to cryptsetup-reencrypt to print progress
    log sequentaly
  - patch: use --progress-frequency in reencryption dracut module
  - Resolves: #1480006 #1447632 #1479857


author: Ondrej Kozina <okozina@redhat.com> - 1.6.7-1
changelog:
  - Update to cryptsetup 1.6.7.
  - patch: avoid use of kernel crypto API socket which is known
    to be broken in RHEL7.0 kernel (7.1+ is fine).
  - Resolves: #1206170


author: Ondrej Kozina <okozina@redhat.com> - 1.6.3-1
changelog:
  - Update to cryptsetup 1.6.3.
  - various fixes related to block devices with 4KiB sectors
  - enable reencryption using specific keyslot (dracut module)
  - fix failure in reading last keyslot from external LUKS header
  - update FIPS POST to be complaint with actual requirements
  - fix hash limiting if parameter is not numeric
  - Resolves: #1028362 #1029032 #1029406 #1030288 #1034388 #1038097


author: Ondrej Kozina <okozina@redhat.com> - 1.6.2-2
changelog:
  - 90reencrypt: Move conflict with 90crypt to install() section.
  - 90reencrypt: Drop to emergency_shell after successful reencryption.
  - Resolves: #1021593


author: Ondrej Kozina <okozina@redhat.com> - 1.6.2-1
changelog:
  - Update to cryptsetup 1.6.2.
  - Add dracut module for cryptsetup-reencrypt (90reencrypt).
  - 90reencrypt: Rename dracut parameteres to be compliant with actual naming guidance.
  - 90reencrypt: Install and load loop kernel module.
  - 90reencrypt: Fix lock file name.
  - 90reencrypt: Add conflict with 90crypt dracut module (more info in #1010287)
  - Resolves: #1010278 #1010287


author: Milan Broz <mbroz@redhat.com> - 1.6.0-1
changelog:
  - Update to cryptsetup 1.6.0.
  - Change default LUKS encryption mode to aes-xts-plain64 (AES128).
  - Force use of gcrypt PBKDF2 instead of internal implementation.


author: Milan Broz <mbroz@redhat.com> - 1.6.0-0.1
changelog:
  - Update to cryptsetup 1.6.0-rc1.
  - Relax license to GPLv2+ according to new release.
  - Compile cryptsetup with libpwquality support.


author: Milan Broz <mbroz@redhat.com> - 1.5.0-0.1
changelog:
  - Update to cryptsetup 1.5.0-rc1.
  - Add veritysetup subpackage.
  - Move localization files to libs subpackage.


author: Milan Broz <mbroz@redhat.com> - 1.4.1-1
changelog:
  - Update to cryptsetup 1.4.1.
  - Add Python cryptsetup bindings.
  - Obsolete separate python-cryptsetup package.


author: Milan Broz <mbroz@redhat.com> - 1.1.0-0.1
changelog:
  - Update to new upstream testing version with new API interface.
  - Add luksSuspend and luksResume commands.
  - Introduce pkgconfig.


author: Milan Broz <mbroz@redhat.com> - 1.0.7-1
changelog:
  - Update to upstream final release.
  - Split libs subpackage.
  - Remove rpath setting from cryptsetup binary.


author: Milan Broz <mbroz@redhat.com> - 1.0.6-5
changelog:
  - Change new project home page.
  - Print more descriptive messages for initialization errors.
  - Refresh patches to versions commited upstream.


author: Till Maas <opensource till name> - 1.0.6-3
changelog:
  - remove a duplicate sentence from the manpage (RH #448705)
  - add patch metadata about upstream status


author: Till Maas <opensource till name> - 1.0.6-0.1.pre2
changelog:
  - Update to new version with several bugfixes
  - remove patches that have been merged upstream
  - add patch from cryptsetup newsgroup
  - fix typo / missing luksRemoveKey in manpage (patch)


author: Till Maas <opensource till name> - 1.0.5-6
changelog:
  - cleanup BuildRequires:
  - removed versions, packages in Fedora are new enough
  - changed popt to popt-devel


author: Till Maas <opensource till name> - 1.0.5-5
changelog:
  - fix devel subpackage requires
  - remove empty NEWS README
  - remove uneeded INSTALL
  - remove uneeded ldconfig requires
  - add readonly detection patch


author: Till Maas <opensource till name> - 1.0.5-4
changelog:
  - disable patch2, libsepol is now detected by configure
  - move libcryptsetup.so to %{_libdir} instead of /%{_lib}


author: Till Maas <opensource till name> - 1.0.5-2
changelog:
  - Use /lib as libdir (#243228)
  - sync header and library (#215349)
  - do not use %makeinstall (recommended by PackageGuidelines)
  - select sbindir with %configure instead with make
  - add TODO


author: Alasdair Kergon <agk@redhat.com> - 1.0.3-4
changelog:
  - Add build dependency on new device-mapper-devel package.
  - Add preun and post ldconfig requirements.
  - Update BuildRoot.


author: Dan Horák <dan[at]danny.cz> 1.3.12-5
changelog:
  - dropped debug output when tools are called with wrong number of arguments (#538403)
  - added patch to support DESTDIR for installing


author: Jindrich Novy <jnovy@redhat.com> 1.2.18-8
changelog:
  - fix type confusion in SCSI_writet(), SCSI_readt(), slow_memcopy()
    and slow_bzero()
  - rebuilt with gcc4


author: Jindrich Novy <jnovy@redhat.com> 1.2.18-5
changelog:
  - dead code elimination
  - updated spec link to recent source
  - removed spec link to obsolete URL
  - rebuilt


author: Kenneth Porter <shiva@well.com>
changelog:
  - 1.2.6
  - Fixed 'eepos' stuff to use | rather than || (whoops!)
  - Accept a 4-byte element descriptor for the robot arm for certain older
  - autochangers.


author: Michal Nowak <mnowak@redhat.com> - 5.0-3
changelog:
  - reshaping to multiple subpackages based on font type/purpose
  - license uncertainity is solved; licence field is set according
    to information from .ttf files read via gnome-font-viewer


author: Petr Pisar <ppisar@redhat.com> - 1.70-1
changelog:
  - 1.70 bump (bug #1101251)
  - Regenerate Perl code from timezone sources (bug #1101251)
  - Update time zone data to Olson 2017b (bug #1101251)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.7-6
changelog:
  - Use SSL_CTX_use_certificate_chain_file() to handle intermediate
    certificates passed additionally in confSERVER_CERT
    Resolves: rhbz#1596725


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.7-5
changelog:
  - Explicitly enabled sm-client statistics
    Resolves: rhbz#890585
  - Enable ECDHE support
    Resolves: rhbz#1124827
  - Properly set {client_port} value on little endian machines,
    patch by Kelsey Cumminngs <kgc@corp.sonic.net>
    Resolves: rhbz#1210914
  - Added makemap and its manual page into alternatives
    Resolves: rhbz#1225891
  - Modified nm-dispatcher script to asynchronously restart sendmail and
    not block the connection activation
    Resolves: rhbz#1237070
  - Added config options allowing disablement of TLS 1.1/2
    Resolves: rhbz#1281476
  - Fixed problem with e-mails not sending from IPv6 enabled server
    to servers with MX record pointing to CNAME
    Resolves: rhbz#1294870
  - Added editmap
    Resolves: rhbz#1342393
  - Removed systemd limit for sendmail restarts to workaround failure due to
    rapid restarts caused by NetworkManager dispatcher script
    Resolves: rhbz#1395102
  - Fixed op.pdf
    Resolves: rhbz#1401070


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.6-2
changelog:
  - Fixed milter_helo regression (milter-helo-fix patch)
    Resolves: rhbz#895552
  - Fixed bogus dates in changelog


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.5-9
changelog:
  - Enabled alternatives --initscript in post section
  - Improved sysvinit subpackage - switched to noarch, added scriptlets
  - Workarounded sm-client stop on SysV to systemd migration


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.5-7
changelog:
  - Hardened build with full relro
  - Provided SysV initscript in sysvinit subpackage for backward compatibility


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.5-6
changelog:
  - Fixed systemctl disable command in preun section
  - Replaced reload by restart, dropped ExecReload from sendmail.service
    Resolves: rhbz#719931
  - Switched to systemctl in NetworkManager dispatcher script
  - Added ExecStartPre=-/etc/mail/make to sm-client.service
  - Hardcoded daemon option (-bd) to sendmail.service, dropped the DAEMON var
  - QUEUE var in /etc/sysconfig/sendmail replaced by SENDMAIL_OPTS var
  - Added default preset (-q1h) to SENDMAIL_OPTS var


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.5-4
changelog:
  - Removed dots from description (there are no dots in systemd packaging
    guidelines)
  - Changed service type to forking and explicitly specified PID files
  - Fixed creation of sm-client.pid
  - Added Wants to sm-client.service and sendmail.service
  - Replaced each occurrence of /var/run by /run in config files
  - More details are available in rhbz#697636


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.5-1
changelog:
  - New version 8.14.5
  - Removed m4-ldap-routing, milter-fix-negativeid, man-i-option-fix
    patches (upstreamed)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-21
changelog:
  - fix negative ctx_id in milter debug output (#577558)
  - fix incomplete description of the -i option in man page (#676824)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-18
changelog:
  - add QoS support, patch from Philip Prindeville <philipp@fedoraproject.org>
    upstream reserved option ID 0xe7 for testing of this new feature (#576643)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-11
changelog:
  - README.libmilter moved to milter subpackage
  - updated description of doc subpackage
  - README.redhat removed (not needed any more)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-10
changelog:
  - added stub man pages for hoststat and purgestat
  - rmail man page added to alternatives
  - updated subpackages description
  - sendmail-cf/cf/README is not packaged - it is useless for end users
  - added comments about purpose of files and patches
  - removed redundant license tag from milter subpackage


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-8
changelog:
  - all 'define' changed to 'global' in spec
  - perl interpreter path fixup moved from 'install' to 'prep'


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-6
changelog:
  - sasl2 config moved from {_libdir}/sasl2 to {_sysconfdir}/sasl2
  - added libdb5 patch for building with libdb-5
  - rebuilt with libdb-5


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-4
changelog:
  - used noreplace for sasl config
  - used ghost instead of explicit provides
  - deffattr changed to (-,root,root,-)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.4-1
changelog:
  - new version 8.14.4 (#552078)
  - RPM attributes S, 5, T not recorded for statistics file
  - adapted patches: makemapman, dynamic, switchfile (#552078)
  - movefiles patch incorporated into aliases_dir patch
  - drop exitpanic patch (fixed upstream)


author: Miroslav Lichvar <mlichvar@redhat.com> 8.14.3-9
changelog:
  - fix milter file descriptors leaks (#485426)
  - skip colon separator when parsing service name in ServiceSwitchFile
  - return with non-zero exit code when free space is below MinFreeBlocks
  - fix service stop/restart when only smclient is running
  - fix submit.cf and helpfile permissions
  - more merge review fixes (#226407)


author: Miroslav Lichvar <mlichvar@redhat.com> 8.14.3-2
changelog:
  - add NM dispatcher script (#451575)
  - print warning on service start when sendmail-cf is required (#447148)
  - replace Makefile with shell script to avoid dependency on make (#467841)
  - fix multiarch conflicts (#343161)
  - preserve timestamps on config files
  - gzip RELEASE_NOTES
  - defuzz patches
  - drop gcc2690 patch


author: Thomas Woerner <twoerner@redhat.com> 8.14.1-4
changelog:
  - do not remove /etc/aliases.db on package removal (rhbz#223637)
  - fixed remaining paths to certs directory in sendmail.mc file
  - added contrib scripts to the doc package (rhbz#183723)
  - added LSB header to init script (rhbz#247053)
  - added plain login information for cyrus-sasl to access file
  - fixed compile problem with glibc-2.6.90+
  - fixed reoccuring m4 include problem (now using sinclude)


author: Thomas Woerner <twoerner@redhat.com> 8.14.1-2
changelog:
  - readded chkconfig add for sendmail in post script
  - dropped mysql support (useless without further patching)
  - fixed executable permissions for /usr/sbin/makemap and /usr/sbin/smrsh
  - dropped FFR_UNSAFE_SASL, because it has no effect anymore


author: Thomas Woerner <twoerner@redhat.com> 8.14.1-1
changelog:
  - new version 8.14.1
  - spec file cleanup for merge review (rhbz#226407)
  - dropped update support for sendmail versions prior to 8.12.0
  - using pdf documentation


author: Florian La Roche <laroche@redhat.com>
changelog:
  - #205803 add sparc/sparc64 to -fPIE list
  - change sendmail.cf reference into sendmail-cf package name


author: Thomas Woerner <twoerner@redhat.com> 8.13.7-3
changelog:
  - using new syntax for access database (#177566)
  - fixed failure message while shutting down sm-client (#119429)
    resolution: stop sm-client before sendmail
  - fixed method to specify persistent queue runners (#126760)
  - removed patch backup files from sendmail-cf tree (#152955)
  - fixed missing dnl on SMART_HOST define (#166680)
  - fixed wrong location of aliases and aliases.db file in aliases man page
    (#166744)
  - enabled CipherList config option for sendmail (#172352)
  - added user chowns for /etc/mail/authinfo.db and move check for cf files
    (#184341)
  - fixed Makefile of vacation (#191396)
    vacation is not included in this sendmail package
  - /var/log/mail now belongs to sendmail (#192850)


author: Thomas Woerner <twoerner@redhat.com> 8.13.7-1
changelog:
  - new version 8.13.7 (#195282)
  - fixes CVE-2006-1173 (VU#146718): possible denial of service issue caused by
    malformed multipart messages (#195776)


author: Thomas Woerner <twoerner@redhat.com> 8.13.5-3
changelog:
  - fixed selinuxenabled path in initscript
  - fixed error handling with sigwait (#137709)
    Thanks to Jonathan Kamens for the patch
  - fixed prereq for cyrus-sasl: now using /usr/sbin/saslauthd
  - appended 'dnl' to cert tags in sendmail.mc


author: Thomas Woerner <twoerner@redhat.com> 8.13.4-1
changelog:
  - new version 8.13.4
  - added requires for the sendmail base package in sendmail-cf, sendmail-devel
    and sendmail-doc
  - dropped upstream close_wait.p2 patch


author: Thomas Woerner <twoerner@redhat.com> 8.13.3-1.1
changelog:
  - fixed gcc4 build: use double quotes for confOPTIMIZE to avoid m4 confusion
    with ','
  - fix for ppc: using tripple-quotes


author: Thomas Woerner <twoerner@redhat.com> 8.13.0-1.1
changelog:
  - fixed init script to not complain missing sendmail-cf package (#126975)
  - better message in /etc/mail/Makefile for missing sendmail-cf package.


author: Thomas Woerner <twoerner@redhat.com> 8.13.0-1
changelog:
  - new version 8.13.0
  - made /etc/mail/Makefile complain missing sendmail-cf package (#123348)
  - fixed ownership of %{_includedir}/libmilter (#73977)
  - moved back to /usr/share/ssl/certs as certificate directory (see sendmail.mc)
  - extended sendmail.mc for spam protection


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-4.1
changelog:
  - added authinfo to possible sendmail maps: /etc/mail/Makefile (#119010)
  - fixed minor version in changelog


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-3
changelog:
  - RH3.0E version: sasl1, no pie, old_setup (provide /etc/aliases)
  - new switches for pie and old_setup


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-2
changelog:
  - added information for saslauthd and AUTH (#113463)
  - fixed STATUS_FILE in sendmail-redhat.mc (#114302)
  - reset mta after update if mta was sendmail (#114257)
  - enabled pie for ia64 again


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-1.2
changelog:
  - /usr/lib/sendmail is in alternatives, now
  - removed trailing / from stdir
  - fixed define for STATUS_FILE


author: Thomas Woerner <twoerner@redhat.com> 8.12.10-6
changelog:
  - reverted to sasl1 for 3.0E: added with_sasl1
  - spec file cleanup
  - new location for statistics file (/var/log/)


author: Karsten Hopp <karsten@redhat.de> 8.12.10-3
changelog:
  - fix usage of RPM_OPT_FLAGS variable in spec file
  - add makecert.sh script to -doc subpackage
  - add cert paths to sendmail.mc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - move debug information from sendmail into debuginfo rpm
  - on %post make sure /etc/aliases.db and /etc/mail/*.db is correctly
    owned by root
  - do not set confTRUSTED_USER to smmsp in sendmail-redhat.mc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - run "make -C /etc/mail" (maybe generating new sendmail.cf, then newaliases
  - added $SENDMAIL_OPTARG that could be set by /etc/sysconfig/sendmail #99224


author: Nalin Dahyabhai <nalin@redhat.com> 8.12.9-6
changelog:
  - move Sendmail.conf from /usr/lib/sasl to /usr/lib/sasl2 and change the
    default pwcheck method to "saslauthd"


author: Nalin Dahyabhai <nalin@redhat.com> 8.12.9-5
changelog:
  - configure to use libsasl2 instead of libsasl to avoid linking with both
    (we also link to libldap, which now uses libsasl2)
  - link with -ldb instead of -ldb-4.0 on all releases after RHL 7.3 instead
    of just 7.3 (all versions of db4-devel thereafter are expected to provide
    the right linking setup)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - mark /etc/mail/Makefile as config(noreplace) #87688
  - mark /etc/pam.d/smtp as config(noreplace) #87731


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - call make with the target "all" #86005
  - add start/stop/restart as Makefile targets
  - add another security patch


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add correct db4-devel requirements for newer releases
  - completely re-do many ifdef code in the spec-file
  - fix some issues building for older RHL releases


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add a confTRUSTED_USER line into sendmail.mc, submit.mc is already ok
  - add patch from sendmail.org for cf/m4/proto.m4


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - do not reject all numeric login names if hesiod support is
    compiled in. #80060
  - remove reference to non-existing man-pages #74552


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - sendmail-8.12.7-etrn.patch from Jos Vos <jos@xos.nl>
  - submit.mc: enable "use_ct_file" by default  #80519
  - add _FFR_MILTER_ROOT_UNSAFE  #78223


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add openssl-devel as a build-time requirement
  - preprocess the config file to add the right version of %{_lib}
  - add kerberos -I and -L flags to build configuration, needed for newer
    versions of libssl


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - always have a queue run interval for sm-msp-queue   #81424
  - Jos Vos suggests adding another variable for sm-client queue-run


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add the following changes from Adrian Havill <havill@redhat.com>
    to our default sendmail.mc file:
  	- added commented-out-by-default common AUTH/SSL examples
  	- updated m4 example and rpm reference
  	- added more comment documentation
  	- add commented out confAUTO_REBUILD example
  	- improve description about MASQUERADE_AS


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add to submit.mc: define(`_MTA_HOST_', `[127.0.0.1]')
    to deliver directly to localhost IP instead of going through DNS
  - submit.mc: exchange msp and use_ct_file to better enable it
  - do not undefine UUCP_RELAY and BITNET_RELAY
  - sendmail.mc: use LOCAL_DOMAIN instead of "Cw" directly
  - sendmail.mc: add commented out MASQUERADE_AS example
  - re-enable DAEMON variable for now


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove absolute path names from the PAM configuration, allowing it to be
    used by any arch on a multilib system


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Changed the behaviour in /etc/mail/Makefile to generate the sendmail.cf and
    submit.cf from the mc files if they changed.
  - Added a small README.redhat that descibed the new mc file behaviour and the
    split into sendmail.cf and submit.cf.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - suggestions form Stephane Lentz:
  	- add correct include statement into submit.mc (like sendmail.mc)
  	- add commented out further suggestions into submit.mc
  	- disable ident lookups


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - make sure more version information is in the cf file #54418
  - do not use "-b" flag when patching in spec file
  - require newer chkconfig version #61035
  - fix preun script #60880
  - add TMPF to access file creation #60956


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - mv include files to /usr/include/libmilter/ #60795
  - do not use "-f" option to virtusertable #60196
  - ad an example smarthost entry to config file #58298


author: Nalin Dahyabhai <nalin@redhat.com> 8.12.2-1
changelog:
  - update to 8.12.2 (adds STARTTLS support without need for sfio)
  - don't forcibly strip binaries; let the build root handle it
  - add creation of the smmsp account (51/51) in %pre
  - enable hesiod map support
  - modify default config to use an MSP
  - comment out 'O AutoRebuildAliases' in %post, otherwise sendmail will
    fail to restart on upgrades


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - integrate ugly logic to compile this src.rpm also on older Red Hat
    Linux releases
  - clean up spec file and patches a bit
  - add db4 support


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - fix another path to correct docu
  - include sendmail/README in the docu
  - compile with -D_FFR_WORKAROUND_BROKEN_NAMESERVERS, but do not
    enable this at runtime
  - devel subpackage files owned by root now


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - change "-q" to "-s" as option to make #57216
  - move milter lib into separate "devel" sub-package
  - add include files to devel sub-package #56064
  - fix pointer in access file to docu #54351


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add libmilter docu
  - add support for userdb to /etc/mail/Makefile
  - use "btree" database files if a userdb is used
  - buildrequires tcp_wrappers


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 8.11.3
  - add "localhost.localdomain" to the list of hostnames accepted
    for local delivery "Cw" in /etc/mail/sendmail.mc
  - add patches from Pekka Savola <pekkas@netcore.fi>
  	- Enable IPv6 at compile time, patch for glibc 2.2 from PLD
  	- Add a commented-out IPv6 daemon .mc line to sendmail.mc
  	- buildrequire: openldap-devel, cyrus-sasl-devel


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add changes from Christopher McCrory <chrismcc@pricegrabber.com>:
  	- prepare /etc/mail/Makefile for more maps not shipped with this rpm
  	- changed sendmail.mc to include some more commented out options,
  	  so that people are directly pointed at important options
  	- add /etc/pam.d/smtp for AUTH
  	- add FEATURE(use_ct_file) and /etc/mail/trusted-users


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - enable daemon mode again, but only listen to the loopback device
    instead of all devices.
  - do not include check.tar with old anti-spam rules


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to (security release) 8.11.2
  - build also on RHL 6.x #16061
  - include smrsh man-page #17901
  - use the "-f" flag for makemap to preserve case for virtusertable
    and userdb in /etc/mail/Makefile - suggested by Harald Hoyer
  - fix /usr/doc -> usr/share/doc in docu #20611
  - wrong path in sendmail.mc #20691
  - tcp-wrapper support wasn't enabled correctly #21642
  - do not expose user "root" when masquerading like in older releases #21643
  - disable the VRFY and EXPN smtp commands #21801
  - disable queue-runs for normal users (restrictqrun privacy flag)
  - fix typo in sendmail.mc #21880, #22682
  - disable daemon mode to see what needs fixing


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - install man pages, not groff output (#3746).
  - use dnl not '#' in m4 comment (#3749).
  - add FEATURE(mailtertable) to the config -- example file needs this (#4649).
  - use db2 not db1.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fox the awk scripts in the postinstall
  - enable FEATURE(accept_unresolvable_domains) by default to make laptop
    users happy.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - make the redhat.mc be a separate source files. Sanitize patches that used
    to touch it.
  - install redhat.mc as /etc/sendmail.mc so that people can easily modify
    their sendmail.cf configurations.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - provide a more sane /etc/mail/access default config file
  - use makemap to initializa the empty databases, not touch
  - added a small, but helpful /etc/mail/Makefile


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Allow empty QUEUE in /etc/sysconfig/sendmail for those who
    want to run sendmail in daemon mode without processing the
    queue regularly.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - added chkconfig support
  - various spec file cleanups
  - changed group to Networking/Daemons (from Daemons).  Sure, it runs on
    non networked systems, but who really *needs* it then?


author: Donnie Barnes <djb@redhat.com>
changelog:
  - made /etc/mail/deny.db a ghost
  - removed preun that used to remove deny.db (ghost handles that now)
  - NOTE: upgrading from the sendmail packages in 4.8, 4.8.1, and possibly
    4.9 (all Red Hat betas between 4.2 and 5.0) could cause problems.  You
    may need to do a makemap in /etc/mail and a newaliases after upgrading
    from those packages.  Upgrading from 4.2 or prior should be fine.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - updated to 8.8.7
  - added some spam filtration
  - combined some makefile patches
  - added BuildRoot support


author: Marek Kasik <mkasik@redhat.com> - 0.1.3-2
changelog:
  - Make ppd-name parameter optional
  - Readd patch for allowing authentication for any and inactive users
  - Readd patch for check of result of polkit authorization check
  - Resolves: #724959


author: Marek Kasik <mkasik@redhat.com> - 0.0.4-12
changelog:
  - Avoid timeout on job-related methods for invalid jobs
  - Make sure to return an error via dbus in case of failure
  - Remove a small leak
  - Resolves: #548790


author: Marek Kasik <mkasik@redhat.com> - 0.0.4-10
changelog:
  - Fix adding of printers without specification of ppd-name.
  - Patch by Tim Waugh.
  - Resolves: #545452


author: Marek Kasik <mkasik@redhat.com> - 0.0.4-8
changelog:
  - Fix adding of printers without specification of device-uri.
  - Patch by Tim Waugh.
  - Resolves: #526442


author: Marek Kasik <mkasik@redhat.com> - 0.0.3-6
changelog:
  - Replace job-cancel, job-restart and job-set-hold-until with job-edit
  - Replace job-cancel-another-owner, job-restart-another-owner
    and job-set-hold-until-another-owner with job-not-owned-edit
  - Add cph_cups_job_get_status() function + some minor changes


author: Marek Kasik <mkasik@redhat.com> 0.0.3-4
changelog:
  - Add ability to reconnect to CUPS server after its reload
    (caused by cupsAdminSetServerSettings() or cupsPutFile())


author: Marek Kasik <mkasik@redhat.com> 0.0.3-2
changelog:
  - Add handling of file:/ protocol
  - Change order of checked policies so the PolicyKit asks only for
    "printer-enable" policy when enabling/disabling a printer
  - Change order of checked policies so the PolicyKit asks only for
    "printer-set-default" policy when setting default printer


author: Ralf Corsépius <corsepiu@fedoraproject.org> - 1.01-1
changelog:
  - Upstream update.
  - Revert Marcela's 2010-05-04 changes.
  - Remove BR's on perl(Test::MinimumVersion), perl(Test::Pod), 
    perl(Test::CPAN::Meta).
    (Reflect upstream having disabled tests depending on them).


author: Ralf Corsépius <corsepiu@fedoraproject.org> - 0.35-1
changelog:
  - Upstream update.
  - Remove BuildArch: noarch (package now is arch'ed).
  - Remove testsuite hack to accept perl(Test::CPAN::Meta) != 0.07.


author: Ralf Corsépius <rc040203@freenet.de> - 0.33-1
changelog:
  - Upstream update.
  - Conditionally BR: perl(Test::CPAN::Meta).
  - Hack testsuite to accept Test::CPAN::Meta != 0.07.


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-0.6.alpha
changelog:
  - Fixes for CVE-2018-14679 CVE-2018-14680 CVE-2018-14681 CVE-2018-14682
  - resolves: rhbz#1611550 rhbz#1611551 rhbz#1611552 rhbz#1611553


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-0.4.alpha
changelog:
  - Avoid 'test/md5.c:126:3: warning: dereferencing type-punned pointer
    will break strict-aliasing rules' by adding -fno-strict-aliasing flag.


author: Marc Wiriadisastra <marc@mwiriadi.id.au> - 0.0-0.3.20060920alpha
changelog:
  - Got source using wget -N
  - Removed some doc's
  - Shifted doc line for doc package
  - Added install -p


author: Richard Hughes <richard@hughsie.com> - 1-7
changelog:
  - Add the user-writable system-wide per-machine ICC profile directory from
    the new version of the OpenIccDirectoryProposal.


author: Peter Lemenkov <lemenkov@gmail.com> 4.60.1-1
changelog:
  - Version 4.60.1 (bugfix release)
  - Added man-pages
  - The only patch was rebased
  - Small cosmetic spec-file cleanups


author: Marcel Plch <mplch@redhat.com> - 3.2.6-14
changelog:
  - Backport upstream patch for heap overflow when parsing too many arguments
  - Resolves: rhbz#1619386


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.2.6-9
changelog:
  - Python 2 binary package renamed to python2-subprocess32
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Jan Synáček <jsynacek@redhat.com> - 3.2.10-9
changelog:
  - fix: SourceVers wrongly sets version in nested directory (#1180652)
  - fix: unload from loaded modulefile broken (#1117327)


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.10-2
changelog:
  - Add patch to comment out stray module use in modules file when not using
    versioning (bug #895555)
  - Add patch to fix module clear command (bug #895551)
  - Add patch from modules list to add completion to avail command


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.7b-7
changelog:
  - Add patch to set a sane default MANPATH
  - Add createmodule.sh utility script for creating modulefiles


author: - Orion Poplawski <orion@cora.nwra.com> - 3.2.6-4
changelog:
  - Add patch to fix extraneous version path entry properly
  - Use --with-module-path to point to /etc/modulefiles for local modules,
    this also fixes bug #436041


author: Joe Orton <jorton@redhat.com> - 1.4.2-3
changelog:
  - work around alising issue in ring macros (upstream PR 50190)
  - fix buildconf with newer libtool (#670621)


author: Bojan Smojver <bojan@rexursive.com> 1.2.12-1
changelog:
  - bump up to 1.2.12
  - add dist
  - remove a comment from apr-1.2.7-psprintfpi.patch (applied upstream)


author: Joe Orton <jorton@redhat.com> 1.2.8-6
changelog:
  - merge review (#225253): drop .a archive; drop use of CC/CXX,
    use BuildRequires; drop old Conflicts; URL reference for Source


author: Joe Orton <jorton@redhat.com> 1.2.2-2
changelog:
  - avoid linking against -lrt
  - don't print -L${libdir} in --libs output
  - don't export -lcrypt/-luuid in .la file


author: Joe Orton <jorton@redhat.com> 0.9.6-6
changelog:
  - don't override CFLAGS at build time
  - allow setting TCP_NODELAY and TCP_CORK concurrently
  - use _exit() not exit() in child if exec*() fails (upstream #30913)


author: Joe Orton <jorton@redhat.com> 0.9.6-5
changelog:
  - add from 0.9.x branch:
   * fix for apr_{uid,gid}_* error handling (r239592)
   * fix for apr_file_ write flushing (r267192)
  - add backport for use of readdir64_r (r265032, r265681, r265684)


author: Joe Orton <jorton@redhat.com> 0.9.4-22
changelog:
  - backport fixes from HEAD:
   * correct implementation of nested mutexes
   * support for POSIX semaphores on LP64 platforms


author: Joe Orton <jorton@redhat.com> 0.9.4-15
changelog:
  - add support for setuid/setgid/sticky bits (André Malo)
  - add apr_threadattr_{guardsize,stacksize}_set() (latter by Jeff Trawick)


author: Joe Orton <jorton@redhat.com> 0.9.4-14
changelog:
  - enable posixsem and process-shared pthread mutex support, but
    ensure that sysvsem remains the default mechanism


author: Joe Orton <jorton@redhat.com> 0.9.4-13
changelog:
  - entirely remove 2Gb file size limit from apr_file_copy();
    fixes "svnadmin hotcopy" on repos with >2Gb strings table
  - work around getnameinfo bugs with v4-mapped addresses
  - fix apr_time_exp_get() for dates in 2038 (Philip Martin)


author: Joe Orton <jorton@redhat.com> 0.9.4-10
changelog:
  - fix configure check for mmap of /dev/zero
  - just put -D_GNU_SOURCE in CPPFLAGS not _{BSD,SVID,XOPEN}_SOURCE


author: Joe Orton <jorton@redhat.com> 0.9.4-6
changelog:
  - define apr_off_t as int/long/... to prevent it changing
    with _FILE_OFFSET_BITS on 32-bit platforms


author: Joe Orton <jorton@redhat.com> 0.9.3-7
changelog:
  - use AI_ADDRCONFIG in getaddrinfo() support (#73350)
  - include a working libtool script rather than relying on
   /usr/bin/libtool (#97695)


author: Daniel Drake <dsd@laptop.org> 2.32.6-3
changelog:
  - Add upstream compile fix for libquvi.so.7 (and rebuild for this version)
  - Add upstream compile fix for glib-2.31


author: Jake Hunsaker <jhunsake@redhat.com> - 2.1.1-9
changelog:
  - Fix a security flaw (CVE-2018-1000805) in Paramiko's server
    mode (does not effect client mode).
    Backported from 2.1.6
    Resolves rhbz#1637366


author: Pavel Cahyna <pcahyna@redhat.com> - 2.1.1-4
changelog:
  - Add a dependency on python2-pyasn1. It used to be a dependency
    of python2-cryptography, but it is not the case with newer versions.
    (RHBZ #1559133)


author: Pavel Cahyna <pcahyna@redhat.com> - 2.1.1-3
changelog:
  - Fix a security flaw (CVE-2018-7750) in Paramiko's server
    mode (emphasis on **server** mode; this does **not** impact *client* use!)
    Backported from 2.1.5.
    Resolves #1557142


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.7.1-1
changelog:
  - v1.7.7.1 (George) 21may11
  - -------------------------
  -   * Make the verification phase of SFTP.put optional (Larry Wright)
  -   * Patches to fix AIX support (anonymous)
  -   * Patch from Michele Bertoldi to allow compression to be turned on in the
  -     client constructor.
  -   * Patch from Shad Sharma to raise an exception if the transport isn't active
  -     when you try to open a new channel.
  -   * Stop leaking file descriptors in the SSH agent (John Adams)
  -   * More fixes for Windows address family support (Andrew Bennetts)
  -   * Use Crypto.Random rather than Crypto.Util.RandomPool
  -     (Gary van der Merwe, #271791)
  -   * Support for openssl keys (tehfink)
  -   * Fix multi-process support by calling Random.atfork (sugarc0de)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.6-3
changelog:
  - Patch to address deprecation warning from pycrypto
  - Simplify build as shown in new python guidelines
  - Enable test suite


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.6-1
changelog:
  - v1.7.6 (Fanny) 1nov09
  - ---------------------
  -  * fixed bugs 411099 (sftp chdir isn't unicode-safe), 363163 & 411910 (more
  -    IPv6 problems on windows), 413850 (race when server closes the channel),
  -    426925 (support port numbers in host keys)


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.5-1
changelog:
  - v1.7.5 (Ernest) 19jul09
  - -----------------------
  -  * added support for ARC4 cipher and CTR block chaining (Denis Bernard)
  -  * made transport threads daemonize, to fix python 2.6 atexit behavior
  -  * support unicode hostnames, and IP6 addresses (Maxime Ripard, Shikhar
  -    Bhushan)
  -  * various small bug fixes


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-3
changelog:
  - Update to latest Python packaging guidelines.
  - Apply patch that fixes insecure use of RandomPool.


author: Tom "spot" Callaway <tcallawa@redhat.com> 20090205-2
changelog:
  - update fontconfig files, change priority to 64
  - don't need to own fontdir in -common, but we'll leave it in for good measure.


author: Steve Grubb <sgrubb@redhat.com> 0.7.5-2
changelog:
  - resolves: #1185610 - libcap-ng: update caps table for newer kernels
  - Fix a leaked FD in upstream code


author: Akira TAGOH <tagoh@redhat.com> - 1.6.3-11
changelog:
  - Don't set environment variables on GNOME. (#1673284)
  - Fix another unbound variable issue (#1533050)


author: Akira TAGOH <tagoh@redhat.com> - 1.6.3-10
changelog:
  - Fix a regression imsettings can't detect GNOME running caused by GNOME rebase. (#1533772)
  - Fix unbound variable issue (#1533050)


author: Akira TAGOH <tagoh@redhat.com> - 1.2.9-1
changelog:
  - New upstream release.
    - fallback to lookup the default configuration on XDG dirs
  - Disable fallback immodule feature for XFCE and LXDE so far.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.8-1
changelog:
  - New upstream release.
  - would possibly fix crash issues.
    (#772342, #766125, #757443, #740175, #720891)


author: Akira TAGOH <tagoh@redhat.com> - 1.2.3-1
changelog:
  - New upstream release.
    - Set some environment variables explicitly to avoid IM
      not working in some cases. (#700513)
    - Fix an abort issue. (#701431)
    - Support the latest LXDE.
    - Get rid of Qt dependency.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.2-1
changelog:
  - New upstream release.
    - Fix an issue keeping alive the defunct process.
    - Stop a notification when no backend modules available. (#693809)
    - Better handling of detecting the supported toolkits/desktops.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-1
changelog:
  - New upstream release.
    - Improve a performance. (#676813)
    - Do not update .xinputrc if -n option to imsettings-switch is given.
    - Stop the daemon process with the certain methods.


author: Jens Petersen <petersen@redhat.com> - 0.108.1-2
changelog:
  - only enable XIM for X locale compose for necessary locales (#623931)
    (so far pt_BR and fi_FI):
  - drop imsettings-none.conf-gtk-xim-default.patch
  - add imsettings-xinput-xcompose.patch


author: Akira TAGOH <tagoh@redhat.com> - 0.108.1-1
changelog:
  - New upstream release.
    - Fix a crash with imsettings-lxde-helper. (#603582)
    - cleanup the unnecessary patches.


author: Akira TAGOH <tagoh@redhat.com> - 0.108.0-2
changelog:
  - Fix issue the invocation of IM always fails in the internal status. (#582448)
  - Add imsettings-lxde subpackage.


author: Jens Petersen <petersen@redhat.com> - 0.107.4-3
changelog:
  - none.conf: default GTK to xim if available like qt does to fix
    current missing X locale compose for gtk and X (#505100)


author: Akira TAGOH <tagoh@redhat.com> - 0.107.4-1
changelog:
  - New upstream release.
    - Update the translations.
    - Remove the unnecessary patches:
      - imsettings-unref-notify.patch
      - imsettings-unref-later.patch
      - imsettings-update-info.patch
      - imsettings-close-fd.patch


author: Akira TAGOH <tagoh@redhat.com> - 0.107.3-4
changelog:
  - Update the IM information as needed if the configuration file is written
    in the script. (#523349)


author: Akira TAGOH <tagoh@redhat.com> - 0.107.3-1
changelog:
  - New upstream release.
    - Fix taking CPU load after switching IM.
    - Fix getting stuck after starting some IM.


author: Akira TAGOH <tagoh@redhat.com> - 0.107.2-1
changelog:
  - New upstream release.
    - Stop IM process properly with the DBus disconnect signal. (#518970)
    - Update the translation. (#517679)


author: Akira TAGOH <tagoh@redhat.com> - 0.107.0-1
changelog:
  - New upstream release.
    - Pop up an error if failed to invoke IM. (#497946)
    - Fix the duplicate recommendation message issue. (#514852)


author: Akira TAGOH <tagoh@redhat.com> - 0.106.2-1
changelog:
  - New upstream release.
    - Fix a freeze issue on X applications with switching IM (#488877)
    - Fix a segfault issue with switching IM (#488899)
    - Fix not creating .xinputrc with disabiling IM first time (#490587)
    - Invoke IM for certain locales. (#493406)


author: Akira TAGOH <tagoh@redhat.com> - 0.106.1-2
changelog:
  - Fix XIM-related issues.
  - Fix a parser error during reading Compose data. (#484142)
  - Get rid of more debugging messages.


author: Akira TAGOH <tagoh@redhat.com> - 0.106.1-1
changelog:
  - New upstream release.
    - Fix a double-free issue. (#485595)
    - Workaround to get the accelerator keys working on X apps. (#488713)
    - Get rid of debugging messages (#489119)


author: Akira TAGOH <tagoh@redhat.com> - 0.106.0-1
changelog:
  - New upstream release.
    - Fix a parser error for Compose data. (#484142)
    - Allow a lowername or .conf name for IM name. (#471833)
    - Add Xfconf support. (#478669)
  - Remove unnecessary autostart files anymore. (#475907)


author: Akira TAGOH <tagoh@redhat.com> - 0.105.1-3
changelog:
  - imsettings-fix-registertriggerkeys.patch: Fix to send
    XIM_REGISTER_TRIGGERKEYS anyway. (#468833)


author: Akira TAGOH <tagoh@redhat.com> - 0.105.1-2
changelog:
  - imsettings-fix-unpredictable-session-order.patch: Run imsettings-applet with
    --disable-xsettings for GNOME/XFCE. (#466206)


author: Akira TAGOH <tagoh@redhat.com> - 0.105.0-4
changelog:
  - Read %{_sysconfdir}/X11/xinput.d/none.conf for non-CJKI locales to make
    consistency in the status on im-chooser. so it would /disables/ IM regardless
    of what the kind of locales you use and what the kind of IM you installed.
    NOTE: if you can't input any characters with GTK+ application, you may
    implicitly use the different buiit-in immodule. you can modify none.conf to
    get the right thing then.
  - imsettings-r210.patch: backport to allow starting none without warnings.


author: Akira TAGOH <tagoh@redhat.com> - 0.105.0-1
changelog:
  - New upstream release.
    - Have a workaround for the race condition issue. (#452849)
    - Fix a freeze issue with ibus. (#465431)
    - Fix a freeze issue on Desktops not supporting XSETTINGS.


author: Akira TAGOH <tagoh@redhat.com> - 0.104.1-1
changelog:
  - New upstream release.
    - Fix a segfault issue. (#462899)
    - Suppress the unnecessary notification. (#463797)
    - Add .schemas file missing. real fix of #460703.


author: Akira TAGOH <tagoh@redhat.com> - 0.104.0-1
changelog:
  - New upstream release.
    - Fix deadkey issue under XIM. (#457901)
    - Correct .desktop file for imsettings-applet (#460695)
    - Hide a status icon by default. (#460703)


author: Akira TAGOH <tagoh@redhat.com> - 0.103.0-1
changelog:
  - New upstream release.
    - im-xsettings-daemon doesn't run automatically. (#459443)
  - Enable XIM support again. (#457635)
  - BR: libgxim-devel and libnotify-devel


author: Akira TAGOH <tagoh@redhat.com> - 0.102.0-1
changelog:
  - New upstream release.
    - Fix no recommendation updated. (#455363)
    - Work on WMs not own/bring up XSETTINGS manager. (#455228)


author: Akira TAGOH <tagoh@redhat.com> - 0.101.3-1
changelog:
  - New upstream release.
    - Use the system-wide xinputrc if .xinputrc is a dangling
      symlink. (#453358)


author: Akira TAGOH <tagoh@redhat.com> - 0.101.2-2
changelog:
  - Backport patch from upstream to solve issues.
    - always saying IM is running when no .xinputrc.
    - workaround for a delay of that IM is ready for XIM.


author: Akira TAGOH <tagoh@redhat.com> - 0.101.2-1
changelog:
  - New upstream release.
    - Fix a typo in the help message. (#451739)
    - Fix a invalid memory access. (#451753)


author: Akira TAGOH <tagoh@redhat.com> - 0.101.0-1
changelog:
  - New upstream release.
  - Add Requires alternatives for %post and %postun.
  - Improve summary.
  - Remove imsettings-reload from %post and %postun. these are
    no longer needed.


author: Charalampos Stratakis <cstratak@redhat.com> - 1.0.13-8
changelog:
  - Fix memory leak in the auth_fn callback.
  - Make sure auth info is NUL-terminated.
  Resolves: rhbz#1248519


author: Jiri Popelka <jpopelka@redhat.com> - 1.0.3-10
changelog:
  - Revert previous change (#681898)
  - /etc/tmpfiles.d/lockdev.conf moved into systemd upstream (#692714)


author: Jiri Popelka <jpopelka@redhat.com> - 1.0.3-6
changelog:
  - Added /etc/tmpfiles.d/lockdev.conf to enable lock directory on tmpfs (#656614)
  - Don't ship static library at all


author: Jiri Popelka <jpopelka@redhat.com> - 1.0.3-1
changelog:
  - 1.0.3.  No longer need 1.0.0-signal, 1.0.1-subdir, 1.0.1-fcntl, 1.0.1-32bit patches.
  - Renumbered patches and sources.


author: Jiri Popelka <jpopelka@redhat.com> - 1.0.1-20
changelog:
  - Fixed pre section (http://fedoraproject.org/wiki/Packaging/UsersAndGroups)
  - Added back Buildroot to silence rpmlint's false positive


author: Adrian Havill <havill@redhat.com> 1.0.1-1
changelog:
  - bumped version
  - make the dev rewrite work with ttys in the /dev/input subdir, not just
    the base level dir (#98160)


author: Nalin Dahyabhai <nalin@redhat.com> 1.0.0-16
changelog:
  - include liblockdev.so so that programs can link to a shared liblockdev
  - fix shared library version numbers


author: Bill Nottingham <notting@redhat.com>
changelog:
  - check that we can open the device r/w before locking
  - fix calling lockdev without any arguments
  - fix waitpid() call in baudboy.h
  - use umask(002), not umask(0)


author: EL Errata <el-errata_ww@oracle.com> - 0.4.9-131.0.1
changelog:
  - Add 0001-multipath-fix-segfault-with-disable_changed_wwids.patch
    * fix segfault with disable_changed_wwids for orabug 29469903 (jianchao.w.wang@oracle.com)


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-131
changelog:
  - Modify 0268-RHBZ-1721855-mpathpersist-fixes.patch
    * The fix for 1721855 broke 1714506.
  - Resolves: bz #1714506


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-130
changelog:
  - Add 0268-RHBZ-1721855-mpathpersist-fixes.patch
    * Fix issues in the mpathpersist speedup code
  - Resolves: bz #1721855


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-129
changelog:
  - Add 0265-RHBZ-1721855-mpathpersist-speedup.patch
    * only grab path information from necessary devices, and allow batch files.
  - Add 0266-RHBZ-1696817-fix-emc-checker.patch
    * fix detection of inactive snapshots
  - Add 0267-RHBZ-1661156-powermax-config.patch
  - Remove 0261-RHBZ-1714506-skip-blacklisted-paths.patch
    * This fix is superseded by 0265-RHBZ-1721855-mpathpersist-speedup.patch
  - Resolves: bz #1661156, #1696817, #1721855


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-128
changelog:
  - Modify 0258-RHBZ-1634183-ANA-prioritizer.patch
    * minor change
  - Add 0259-RHBZ-1701604-fix-nr-active.patch
    * recalculate the number of active paths whenever a path is checked
  - Add 0260-RHBZ-1634183-prio-fixes.patch
  - Add 0261-RHBZ-1714506-skip-blacklisted-paths.patch
    * ignore blacklisted paths in mpathpersist
  - Add 0262-RHBZ-1699486-reload-with-failed-paths.patch
    * allow forced reloads even if there are no reusable paths
  - Add 0263-RHBZ-1686708-nvme-hcil.patch
    * make nvme ids work like in upstream
  - Add 0264-RHBZ-1699441-de-series-config.patch
  - Resolves: bz #1686708, #1699441, #1699486, #1701604, #1714506


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-127
changelog:
  - Add 0256-RHBZ-1672175-retry-no-fd-paths.patch
    * retry adding paths if they couldn't be opened initially
  - Add 0257-RHBZ-1679556-dont-check-dm-devices.patch
    * don't check if dm devices are multipath paths
  - Add 0258-RHBZ-1634183-ANA-prioritizer.patch
    * Add NVMe ANA path prioritizer
  - Resolves: bz #1634183, #1672175, #1679556


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-125
changelog:
  - Modify 0250-RHBZ-1610867-rescan-change.patch
    * Fix memory Leak
  - Modify 0255-RHBZ-1638651-marginal-path.patch
    * Fix NULL dereference
  - Refresh 0252-RHBZ-1623595-cmd-error-status.patch
  - Resolves: bz #1610867, #1638651


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-124
changelog:
  - Add 0250-RHBZ-1610867-rescan-change.patch
    * Update multipath devices on change events.
  - Add 0251-RHBZ-1614011-discovery-timeout.patch
  - Add 0252-RHBZ-1623595-cmd-error-status.patch
  - Add 0253-RHBZ-1618549-mix-hw-handler.patch
    * Don't retain attached hw handler when different hw handlers are
      attached to different paths
  - Add 0254-RHBZ-1635819-fix-mpathpersist-crash.patch
  - Add 0255-RHBZ-1638651-marginal-path.patch
    * backport marginal_path options from upstream
  - Resolves: bz #1610867, #1614011, #1618549, #1623595, #1635819, #1638651


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-123
changelog:
  - Add 0249-RHBZ-1610263-mpathpersist-max-fds.patch
    * make mpathpersist honor max_fds multipath.conf parameter
  - Resolves: bz #1610263


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-121
changelog:
  - Add 0245-RHBZ-1584228-fix-readsector0_size.patch
    * correctly figure IO size
  - Add 0246-RHBZ-1593459-add-transport-blacklist.patch
    * and new blacklist option, "protocol"
  - Add 0247-RHBZ-1585824-mpathconf-allow-doc.patch
  - Resolves: bz #1584228, #1585824, #1593459


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-120
changelog:
  - Add 0237-RHBZ-1526876-show-sysfs-state.patch
    * Correctly get sysfs state for multipath -l output
  - Add 0238-RHBZ-1508483-mpathconf-info.patch
  - Add 0239-RHBZ-1544958-client-timeout.patch
    * increase maximum multipathd client reply timeout to 60 seconds
  - Add 0240-UPBZ-1568902-id_size.patch
    * increase maximum size of product and revision strings to deal with nvme
  - Add 0241-RHBZ-1554516-show-path-failures.patch
    * add a path failures multipathd path format wildcard
  - Add 0242-RHBZ-1541116-all-tg-pt.patch
    * add all_tg_pt configuration option to make mpathpersist send only
      one registration per host
  - Add 0243-RHBZ-1498724-save-persist-options.patch
    * allow ":aptpl" to be added to the reservation_key to fix multipathd
      aptpl persistent reservation handling
  - Add 0244-RHBZ-1562247-remove-rbd.patch
    * remove multipath support for rbd
  - Resolves: bz #1498724, #1508483, #1526876, #1541116, #1544958, #1554516
  - Resolves: bz #1562247, #1568902


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-118
changelog:
  - Modify 0224-RHBZ-1452210-prkey.patch
    * Improve error checking for mpathpersist
  - Resolves: bz #1452210


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-117
changelog:
  - Modify 0235-RHBZ-1480638-NVMe-support.patch
    * remove overly-restrictive uevent filtering
  - Resolves: bz #1480638


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-116
changelog:
  - Add 0235-RHBZ-1480638-NVMe-support.patch
    * adds support for multipathing NVMe devices
  - Resolves: bz #1480638


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-115
changelog:
  - Add 0233-RHBZ-1451852-1482629-nimble-config.patch
  - Add 0234-RHBZ-1500109-doc-typo.patch
  - Remove old triggerun scriptlet (bz1470384)
  - Resolves: bz #1451852, #1470384, #1482629, #1500109


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-114
changelog:
  - Add 0226-RH-allow-overrides-section.patch
    * This is a dummy section that exists to help the transition to RHEL8
  - Add 0227-RHBZ-1465773-fix-path-delay-msg.patch
  - Add 0228-RHBZ-1464634-hauwei-config-update.patch
  - Add 0229-RHBZ-1467987-poll-on-udev-monitor.patch
    * Do poll first, so udev_monitor_receive_device doesn't return error when
      there is no uevent
  - Add 0230-UP-allow-invalid-creates.patch
    * Allow creation of devices with no valid paths.
  - Add 0231-RHBZ-1458852-delay-readying.patch
    * Add ghost_delay configuration option to delay device activation when only
      ghost paths exist.
  - Add 0232-RHBZ-1456955-property-blacklist.patch
    * Add the "property" blacklist type.
  - Resolves: bz #1456955, #1458852, #1464634, #1465773, #1467987


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-113
changelog:
  - Modify 0224-RHBZ-1452210-prkey.patch
    * fix errow with telling multipathd to set prkeys
  - Add 0225-RH-udevdir.patch
    * fix rpmdiff complaint about udev rules installation
  - Resolves: bz #1452210


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-112
changelog:
  - Modify 0191-RHBZ-1169168-disable-changed-paths.patch
    * man page fixup
  - Modfiy 0197-RHBZ-1394059-max-sectors-kb.patch
    * man page fixup
  - Modify 0205-RHBZ-1416569-reset-stats.patch
    * man page fixup
  - Add 0218-RHBZ-1459370-add-feature-fix.patch
    * handle null feature string
  - Add 0219-RHBZ-1448970-fix-resize.patch
    * if the resize fails, try to resume again with the old table.
  - Add 0220-RHBZ-1448223-fix-kpartx.patch
    * gracefully fail when run on something other than a file or block device
  - Add 0221-RH-harden-files.patch
    * change build parameters to use position independent code
  - Add 0222-RHBZ-1457288-fix-show-maps-json.patch
    * handle running "show maps json" with no multipath devices present
  - Add 0223-RHBZ-1452210-unpriv-sgio.patch
    * add unpriv_sgio configuration option to set unpriv_sgio on multipath device
      and paths
  - Add 0224-RHBZ-1452210-prkey.patch
    * allow setting reservation_key to "file" to set and read keys from
      prkey_file. Also add new multipathd commands to modify the prkey file.
  - Resolves: bz #1459370, #1448970, #1448223, #1457288, #1452210


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-111
changelog:
  - Remove 0217-RHBZ-1437329-blacklist-oracle-devs.patch
    * Incorrect change, and the bug is already fixed.
  - Move 0218-RHBZ-1448576-3PAR-config.patch to
    0217-RHBZ-1448576-3PAR-config.patch
  - Resolves: bz #1448576


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-110
changelog:
  - Add 0215-RHBZ-1444194-fix-check-partitions.patch
    * make sure kpartx partions match the correct device
  - Add 0216-RHBZ-1448562-fix-reserve.patch
    * don't join threads that haven't been created
  - Add 0217-RHBZ-1437329-blacklist-oracle-devs.patch
    * blacklist db2.* devices
  - Add 0218-RHBZ-1448576-3PAR-config.patch
  - Resolves: bz #1444194, #1448562, #1437329, #1448576


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-109
changelog:
  - Add 0214-RHBZ-1392115-set-paths-not-ready.patch
    * Set ENV{SYSTEMD_READY}="0" on multipath path devices
  - Resolves: bz #1392115


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-107
changelog:
  - Modify 0197-RHBZ-1394059-max-sectors-kb.patch
    * Make multipath only change max_sectors_kb on creates. On reloads, it
      just makes sure the new path matches the multipath device.
  - Refresh 0198-RHBZ-1372032-detect-path-checker.patch
  - Refresh 0201-RHBZ-1403552-silence-warning.patch
  - Refresh 0206-RHBZ-1239173-pt2-no-paths.patch
  - Refresh 0207-UP-add-libmpathcmd.patch
  - Refresh 0212-RHBZ-1431562-for-read-only.patch
  - Resolves: bz #1394059


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-104
changelog:
  - Change _pkgconfdir from /usr/share/pkgconfig to /usr/lib/pkgconfig
  - Modify 0209-UPBZ-1430097-multipath-C-API.patch
    * change _pkgconfdir and fixed double-closing fd
  - Add 0211-RH-strlen-fix.patch
    * checks that variables are not NULL before passing them to strlen
  - Related: bz #1430097


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-102
changelog:
  - Add 0207-UP-add-libmpathcmd.patch
    * New shared library, libmpathcmd, that sends and receives messages from
      multipathd. device-mapper-multipath now uses this library internally.
  - Add 0208-UPBZ-1430097-multipathd-IPC-changes.patch
    * validation that modifying commands are coming from root.
  - Add 0209-UPBZ-1430097-multipath-C-API.patch
    * New shared library. libdmmp, that presents the information from multipathd
      in a structured manner to make it easier for callers to use
  - Add 0210-RH-fix-uninstall.patch
    * Minor compilation fixes
  - Make 3 new subpackages
    * device-mapper-multipath-devel, libdmmp, and libdmmp-devel. libmpathcmd
      and libmpathprio are in device-mapper-multipath-libs and
      device-mapper-multipath-devel. libdmmp is in its own subpackages
  - Move libmpathprio devel files to device-mapper-multipath-devel
  - Resolves: bz #1430097


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-101
changelog:
  - Modify 0166-RHBZ-1323429-dont-allow-new-wwid.patch
    * change print message
  - Add 0191-RHBZ-1169168-disable-changed-paths.patch
    * add "disabled_changed_wwids" multipath.conf parameter to disable
      paths whose wwid changes
  - Add 0192-RHBZ-1362409-infinibox-config.patch
  - Add 0194-RHBZ-1351964-kpartx-recurse.patch
    * fix recursion on corrupt dos partitions
  - Add 0195-RHBZ-1359510-no-daemon-msg.patch
    * print a messages when multipathd isn't running
  - Add 0196-RHBZ-1239173-dont-set-flag.patch
    * don't set reload flag on reloads when you gain your first
      valid path
  - Add 0197-RHBZ-1394059-max-sectors-kb.patch
    * add "max_sectors_kb" multipath.conf parameter to set max_sectors_kb
      on a multipath device and all its path devices
  - Add 0198-RHBZ-1372032-detect-path-checker.patch
    * add "detect_checker" multipath.conf parameter to detect ALUA arrays
      and set the path checker to TUR
  - Add 0199-RHBZ-1279355-3pardata-config.patch
  - Add 0200-RHBZ-1402092-orphan-status.patch
    * clear status on orphan paths
  - Add 0201-RHBZ-1403552-silence-warning.patch
  - Add 0202-RHBZ-1362120-skip-prio.patch
    * don't run prio on failed paths
  - Add 0203-RHBZ-1363718-add-msgs.patch
  - Add 0204-RHBZ-1406226-nimble-config.patch
  - Add 0205-RHBZ-1416569-reset-stats.patch
    * add "reset maps stats" and "reset map <map> stats" multipathd
      interactive commands to reset the stats tracked by multipathd
  - Add 0206-RHBZ-1239173-pt2-no-paths.patch
    * make multipath correctly disable scanning and rules running when
      it gets a uevent and there are not valid paths.
  - Resolves: bz #1169168, #1239173, #1279355, #1359510, #1362120, #1362409
  - Resolves: bz #1363718, #1394059, #1351964, #1372032, #1402092, #1403552
  - Resolves: bz #1406226, #1416569


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-100
changelog:
  - Add 0189-RHBZ-1368211-remove-retries.patch
    * add "remove_retries" multipath.conf parameter to make multiple attempts
      to remove a multipath device if it is busy.
  - Add 0190-RHBZ-1380602-rbd-lock-on-read.patch
    * pass lock_on_read when remapping image
  - Resolves: bz #1368211, #1380602


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-99
changelog:
  - Add 0188-RHBZ-1368501-dont-exit.patch
    * make multipathd not exit if it encounters recoverable errors on startup
  - Resolves: bz #1368501


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-98
changelog:
  - Modified 0180-multipath-tools-Add-rbd-checker.patch
    * make the rbd path checker only compile if librados2-devel is installed
  - Make librados2-devel only be BuildRequired on x86_64
  - Resolves: bz #1348372


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-97
changelog:
  - Add 0177-libmultipath-correctly-initialize-pp-sg_id.patch
    * This and all the following patches add the rbd patch checker
  - Add 0178-libmultipath-add-rbd-discovery.patch
  - Add 0179-multipath-tools-add-checker-callout-to-repair-path.patch
  - Add 0180-multipath-tools-Add-rbd-checker.patch
  - Add 0181-multipath-tools-Add-rbd-to-the-hwtable.patch
  - Add 0182-multipath-tools-check-for-initialized-checker-before.patch
  - Add 0183-multipathd-Don-t-call-repair-on-blacklisted-path.patch
  - Add 0184-rbd-fix-sync-repair-support.patch
  - Add 0185-rbd-check-for-nonshared-clients.patch
  - Add 0186-rbd-check-for-exclusive-lock-enabled.patch
  - Add 0187-rbd-fixup-log-messages.patch
  - Added BuildRequires on librados2-devel
  - Resolves: bz #1348372


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-96
changelog:
  - Modify 0136-RHBZ-1304687-wait-for-map-add.patch
    * change missing_uev_msg_delay to missing_uev_msg_timeout, and make
      multipathd re-enable table loads if the timeout has passed
  - Refresh 0137-RHBZ-1280524-clear-chkr-msg.patch
  - Refresh 0139-RHBZ-1273173-queue-no-daemon-doc.patch
  - Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
  - Refresh 0154-UPBZ-1291406-disable-reinstate.patch
  - Refresh 0155-UPBZ-1300415-PURE-config.patch
  - Refresh 0156-UPBZ-1313324-dont-fail-discovery.patch
  - Refresh 0161-RHBZ-1311659-no-kpartx.patch
  - Refresh 0167-RHBZ-1335176-fix-show-cmds.patch
  - Add 0173-RH-update-man-page.patch
  - Add 0174-RHBZ-1362396-modprobe.patch
    * make starting the multipathd service modprobe dm-multipath in the
      sysvinit scripts
  - Add 0175-RHBZ-1357382-ordering.patch
    * force multipathd.service to start after systemd-udev-trigger.service
  - Add 0176-RHBZ-1363830-fix-rename.patch
    * initialized a variable to make dm_rename not fail randomly
  - Resolves: bz #1304687, #1362396, #1357382, #1363830


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-95
changelog:
  - Add 0170-UPBZ-1352925-fix-typo.patch
  - Add 0171-UPBZ-1356651-allow-zero-size.patch
    * Allow zero-sized paths to be added to a multipath device
  - Add 0172-RHBZ-1350931-no-active-add.patch
    * Allow paths to be added to a new map if no active paths exist. Also
      fixes 1351430
  - Resolves: bz #1350931, #1351430, #1352925, #1356651


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-93
changelog:
  - Modify 0135-RHBZ-1299600-path-dev-uevents.patch
    * trigger uevents when adding wwids for existing devices during startup
  - Refresh 0136-RHBZ-1304687-wait-for-map-add.patch
  - Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
  - Add 0168-RHBZ-1347769-shared-lock.patch
    * make multipath lock the path devices with a shared lock
  - Add 0169-UPBZ-1353357-json-output.patch
    * add mulitpathd json output command
  - Resolves: bz #1299600, #1347769, #1353357


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-92
changelog:
  - Add 0166-RHBZ-1323429-dont-allow-new-wwid.patch
    * don't allow path wwid to change while it is in use
  - Add 0167-RHBZ-1335176-fix-show-cmds.patch
    * and new show multipath format wildcard, 'f' to sho number of failures.
      This will hopefully be useful for tracking what happens to multipath
      devices for bz #1335176
  - Resolves: bz #1323429


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-91
changelog:
  - Add 0165-UPBZ-1341748-MSA-2040-conf.patch
    * Add default config for MSA 2040 array
  - Resolves: bz #1341748


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-90
changelog:
  - Modify 0159-UPBZ-1255885-udev-waits.patch
    * fix bug in failure path
  - Add 0160-RH-udev-flags.patch
  - Add 0161-RHBZ-1311659-no-kpartx.patch
    * skip_kpartx option disables kpartx running on multipath devices
  - Add 0162-RHBZ-1333331-huawei-config.patch
    * Add default config for Huawei XSG1 array
  - Add 0163-UPBZ-1333492-resize-map.patch
    * restore old size if resize fails
  - Add 0164-RHBZ-1311463-dos-part-rollover.patch
    * fix incorrect partition size due to 4k device size rollover
  - Resolves: bz #1255885, #1311463, #1311659, #1333331, #1333492


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-89
changelog:
  - Modify 0151-RHBZ-1297456-weighted-fix.patch
    * add documentation
  - Add 0157-RHBZ-1319853-multipath-c-error-msg.patch
    * better error reporting for multipath -c
  - Add 0158-RHBZ-1318581-timestamp-doc-fix.patch
    * add documentation for -T
  - Add 0159-UPBZ-1255885-udev-waits.patch
    * make multipath and kpartx wait after for udev after each command
  - Resolves: bz #1297456, #1319853, #1318581, #1255885


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-88
changelog:
  - Add 0151-RHBZ-1297456-weighted-fix.patch
    * add wwn keyword to weighted prioritizer for persistent naming
  - Add 0152-RHBZ-1269293-fix-blk-unit-file.patch
    * use "Wants" instead of "Requires"
  - Add 0153-RH-fix-i686-size-bug.patch
    * use 64-bit keycodes for multipathd client commands
  - Add 0154-UPBZ-1291406-disable-reinstate.patch
    * don't automatically reinstate ghost paths for implicit alua devices
  - Add 0155-UPBZ-1300415-PURE-config.patch
    * Add default config for PURE FlashArray
  - Add 0156-UPBZ-1313324-dont-fail-discovery.patch
    * don't fail discovery because individual paths failed.
  - Resolves: bz #1297456, #1269293, #1291406, #1300415, #1313324


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-87
changelog:
  - Add 0133-RHBZ-1241774-sun-partition-numbering.patch
    * makr kpartx device numbers match partition numbers
  - Add 0134-RHBZ-1241528-check-mpath-prefix.patch
    * only touch devices with a "mpath-" dm uuid prefix
  - Add 0135-RHBZ-1299600-path-dev-uevents.patch
    * trigger path uevent the first time a path is claimed by multipath
  - Add 0136-RHBZ-1304687-wait-for-map-add.patch
    * wait for the device to finish being added before reloading it.
  - Add 0137-RHBZ-1280524-clear-chkr-msg.patch
  - Add 0138-RHBZ-1288660-fix-mpathconf-allow.patch
    * don't remove existing lines from blacklist_exceptions section
  - Add 0139-RHBZ-1273173-queue-no-daemon-doc.patch
  - Add 0140-RHBZ-1299647-fix-help.patch
  - Add 0141-RHBZ-1303953-mpathpersist-typo.patch
  - Add 0142-RHBZ-1283750-kpartx-fix.patch
    * only remove devices if their uuid says that they are the correct
      partition device
  - Add 0143-RHBZ-1299648-kpartx-sync.patch
    * default to using udev sync mode
  - Add 0144-RHBZ-1299652-alua-pref-arg.patch
    * allow "exclusive_pref_bit" argument to alua prioritizer
  - Add 0145-UP-resize-help-msg.patch
  - Add 0146-UPBZ-1299651-raw-output.patch
    * allow raw format mutipathd show commands, that remove headers and padding
  - Add 0147-RHBZ-1272620-fail-rm-msg.patch
  - Add 0148-RHBZ-1292599-verify-before-remove.patch
    * verify that all partitions are unused before attempting to remove a device
  - Add 0149-RHBZ-1292599-restore-removed-parts.patch
    * don't disable kpartx when restoring the first path of a device.
  - Add 0150-RHBZ-1253913-fix-startup-msg.patch
    * wait for multipathd daemon to write pidfile before returning
  - Resolves: bz #1241528, #1241774, #1253913, #1272620, #1273173, #1280524
  - Resolves: bz #1283750, #1288660, #1292599, #1299600, #1299647, #1299648
  - Resolves: bz #1299651, #1299652, #1303953, #1304687


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-86
changelog:
  - Add 0132-RHBZ-1296979-fix-define.patch
    * look for the correct libudev function to set define
  - Resolves: bz # 1296979


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-84
changelog:
  - 0131-UPBZ-1259831-lock-retry.patch
    * retry locking when creating multipath devices
  - Resolves: bz# 1259831


author: Benjmain Marzinski <bmarzins@redhat.com> 0.4.9-83
changelog:
  - Add 0130-RHBZ-1259523-host_name_len.patch
    * increase size of host string
  - Resolves: bz# 1259523


author: Benjmain Marzinski <bmarzins@redhat.com> 0.4.9-82
changelog:
  - Add 0129-UPBZ-1254292-iscsi-targetname.patch
    * check for targetname iscsi sysfs value
  - Resolves: bz #1254292


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-81
changelog:
  - Modify 0128-RHBZ-1222123-mpathconf-allow.patch
    * Fix up covscan complaints.
  - Related: bz #1222123


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-80
changelog:
  - Add 0127-RHBZ-1201030-use-blk-availability.patch
    * Make multipath use blk-availability.service
  - Add 0128-RHBZ-1222123-mpathconf-allow.patch
    * Add mpathconf --allow for creating specialized config files.
  - Resolves: bz #1201030, #1222123


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-79
changelog:
  - Add 0124-RHBZ-1209275-retrigger-uevents.patch
    * Make multipathd retrigger uevents when paths haven't successfully had
      their udev_attribute environment variable set by udev and add
      "retrigger_ties" and "retrigger_delay" to control this
  - Add 0125-RHBZ-1153832-kpartx-delete.patch
    * Delete all partition devices with -d (not just the ones in the partition
      table)
  - Add 0126-RHBZ-1211383-alias-collision.patch
    * make multipathd use the old alias, if rename failed and add
      "new_bindings_in_boot" to determine if new bindings can be added to
      the bindings file in the initramfs
  - Resolves: bz #1153832, #1209275, #1211383


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-78
changelog:
  - Modify 0102-RHBZ-631009-deferred-remove.patch
    * Code refactor and minor fix.
  - Add 0106-RHBZ-1169935-no-new-devs.patch
    * add new configuration option "ignore_new_boot_devs"
  - Add 0107-RH-adapter-name-wildcard.patch
    * add new paths wildcard to show the host adapter
  - Add 0108-RHBZ-1153832-kpartx-remove-devs.patch
    * switch to kpartx -u in 62-multipath.rules to delete removed partitions
  - Add 0109-RH-read-only-bindings.patch
    * add -B support to multipathd
  - Add 0110-RHBZ-blacklist-vd-devs.patch
    * virtio-blk devices don't report a WWID so multipath can't use them
  - Add 0111-RH-dont-show-pg-timeout.patch
    * remove pg_timeout setting and displaying code
  - Add 0112-RHBZ-1194917-add-config_dir-option.patch
    * add new configuration option "config_dir"
  - Add 0113-RHBZ-1194917-cleanup.patch
    * code refactoring
  - Add 0114-RHBZ-1196394-delayed-reintegration.patch
    * add new configuration options "delay_watch_checks" and
      "delay_wait_checks"
  - Add 0115-RHBZ-1198418-fix-double-free.patch
    * fix crash when multipath fails adding a multipath device
  - Add 0116-UPBZ-1188179-dell-36xxi.patch
    * New builtin config
  - Add 0117-RHBZ-1198424-autodetect-clariion-alua.patch
    * update default config
  - Add 0118-UPBZ-1200738-update-eternus-config.patch
    * update default config
  - Add 0119-RHBZ-1081397-save-alua-info.patch
    * make prioritizers save information between calls to speed them up.
  - Add 0120-RHBZ-1043093-realloc-fix.patch
    * free old memory if realloc fails.
  - Add 0121-RHBZ-1197234-rules-fix.patch
    * make sure kpartx runs after an DM_ACTIVATION event occurs.
  - Add 0122-RHBZ-1212590-dont-use-var.patch
    * use /run instead of /var/run
  - Add 0123-UPBZ-1166072-fix-path-offline.patch
    * Don't mark quiesce and transport-offline paths as offline
  - Modify mulfipth.conf default config file (bz #1194794)
  - Related: bz #1153832
  - Resolves: bz #631009, #1043093, #1081397, #1166072, #1169935, #1188179
  - Resolves: bz #1194794, #1194917, #1196394, #1197234, #1198418, #1198424
  - Resolves: bz #1200738, #1212590


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-77
changelog:
  - Add 0105-RHBZ-1180032-find-multipaths-man.patch
    * add find_multipaths to man page
  - Modify multipath.conf (bz #1069360)
    * add uid_attribute example
  - Resolves: bz #1180032


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-76
changelog:
  - Modify 0102-RHBZ-631009-deferred-remove.patch
    * Fixed compiler warning message for builds with old device-mapper versions
  - Add 0104-RHBZ-1159337-fix-double-free.patch
    * made ev_remove_path exit immediately after failing setup_multipath, since
      it handles cleaning up the device
  - Resolves: bz #1159337
  - Related: bz #631009


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-75
changelog:
  - Add 0103-RHBZ-1148979-fix-partition-mapping-creation-race-with-kpartx.patch
    * Only run kpartx on device activation
  - Resolves: bz #1148979


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-72
changelog:
  - Add 0101-RH-cleanup-partmaps-code.patch
    * code refactoring to prepare for next patch
  - Add 0102-RHBZ-631009-deferred-remove.patch
    * add deferred_remove option to /etc/multipath.conf
  - Resolves: bz #631009


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-71
changelog:
  - Re-add 0050-RH-listing-speedup.patch
  - Modify 0098-UPBZ-1067171-mutipath-i.patch
    * add dry_run cleanup code from upstream
  - Refresh 0099-RH-add-all-devs.patch
  - Add 0100-RHBZ-1067171-multipath-i-update.patch
    * make -i work correctly with find_multipaths
  - Resolves: bz #1067171


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-70
changelog:
  - Modify 0096-RHBZ-979474-new-wildcards.patch
    * Fix a faulty check
  - Add 0098-UPBZ-1067171-mutipath-i.patch
    * Add -i option to ignore wwids file when checking for valid paths
  - Add 0099-RH-add-all-devs.patch
    * Add new devices config option all_devs. This makes the configuration
      overwrite the specified values in all builtin configs
  - Related: bz #979474
  - Resolves: bz #1067171


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-69
changelog:
  - Add 0096-RHBZ-979474-new-wildcards.patch
    * Add N, n, R, and r path wildcards to print World Wide ids
  - Add 0097-RH-fix-coverity-errors.patch
    * Fix a number of unterminated strings and memory leaks on failure
      paths.
  - Resolves: bz #979474


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-68
changelog:
  - Add 0091-RHBZ-1069584-fix-empty-values-fast-io-fail-and-dev-loss.patch
    * check for null pointers in configuration reading code.
  - Add 0092-UPBZ-1104605-reload-on-rename.patch
    * Reload table on rename if necessary
  - Add 0093-UPBZ-1086825-user-friendly-name-remap.patch
    * Keep existing user_friend_name if possible
  - Add 0094-RHBZ-1086825-cleanup-remap.patch
    * Cleanup issues with upstream patch
  - Add 0095-RHBZ-1127944-xtremIO-config.patch
    * Add support for EMC ExtremIO devices
  - Resolves: bz #1069584, #1104605, #1086825, #1086825, #1127944


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-67
changelog:
  - Modify multipath.conf (bz #1069360)
    * remove getuid_callout example
  - Add 0081-RHBZ-1066264-check-prefix-on-rename.patch
    * make multipath check the prefix on kpartx partitions during rename, and
      copy the existing behaviour
  - Add 0082-UPBZ-1109995-no-sync-turs-on-pthread_cancel.patch
    * If async tur checker fails on threads, don't retry with the sync version
  - Add 0083-RHBZ-1080055-orphan-paths-on-reload.patch
    * Fix case where pathlist wasn't getting updated properly
  - Add 0084-RHBZ-1110000-multipath-man.patch
    * fix errors in multipath man page
  - Add 0085-UPBZ-1110006-datacore-config.patch
    * Add support for DataCore Virtual Disk
  - Add 0086-RHBZ-1110007-orphan-path-on-failed-add.patch
    * If multipathd fails to add path correctly, it now fully orphans the path
  - Add 0087-RHBZ-1110013-config-error-checking.patch
    * Improve multipath.conf error checking.
  - Add 0088-RHBZ-1069811-configurable-prio-timeout.patch
    * checker_timeout now adjusts the timeouts of the prioritizers as well.
  - Add 0089-RHBZ-1110016-add-noasync-option.patch
    * Add a new defaults option, "force_sync", that disables the async mode
      of the path checkers. This is for cases where to many parallel checkers
      hog the CPU
  - Add 0090-UPBZ-1080038-reorder-paths-for-round-robin.patch
    * make multipathd order paths for better throughput in round-robin mode
  - Resolves: bz #1069360, #1066264, #1109995, #1080055, #1110000, #1110006
  - Resolves: bz #1110007, #1110013, #1069811, #1110016, #1080038


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-66
changelog:
  - Add 0080-RHBZ-1075796-cmdline-wwid.patch
    * add multipath option "-A" to add wwids specified by the kernel
      command line mapth.wwid options.
  - Resolves: bz #1075796


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-65
changelog:
  - Add 0078-RHBZ-1054044-fix-mpathconf-manpage.patch
    * Fix typo
  - Add 0079-RHBZ-1070581-add-wwid-option.patch
    * add multipath option "-a". To add a device's wwid to the wwids file
  - Resolves: bz #1054044, #1070581


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-63
changelog:
  - Modify 0072-RHBZ-1039199-check-loop-control.patch
    * only call close on the /dev/loop-control fd the open succeeds
  - Add 0073-RH-update-build-flags.patch
    * fix print call to work with -Werror=format-security compile flag, and
      change compilation flags for non-rpmbuild compiles
  - Add 0074-RHBZ-1056976-dm-mpath-rules.patch
    * Add rules to keep from doing work in udev if there are no
      active paths, or if the event was for a multipath device
      reloading its table due to a path change.
  - Add 0075-RHBZ-1056976-reload-flag.patch
    * multipath code to identify reloads that the new rules can
      ignore
  - Add 0076-RHBZ-1056686-add-hw_str_match.patch
    * add a new default config paramter, "hw_str_match", to make user
      device configs only overwrite builtin device configs if the
      identifier strings match exactly, like the default in RHEL6.
  - Add 0077-RHBZ-1054806-mpathconf-always-reload.patch
    * Make mpathconf always reconfgure multipathd when you run it with
      a reconfigure option and --with-multipathd=y, even if the
      configuration doesn't change.
  - Update Requires and BuildRequires for device-mapper to 1.02.82-2
  - Install new udev rules file /usr/lib/udev/rules.d/11-dm-mpath.rules
  - Related: bz #1039199
  - Resolves: bz #1054806, #1056686, #1056976


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-60
changelog:
  - Add 0072-RHBZ-1039199-check-loop-control.patch
    * Make kpartx use LOOP_CTL_GET_FREE and loop-control to find a free
      loop device. This will autoload the loop module.
  - Resolves: bz #1039199


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-59
changelog:
  - Add 0067-RHBZ-1022899-fix-udev-partition-handling.patch
    * Make sure to wipe partition devices on change event if they weren't 
      wiped on the device add event 
  - Add 0068-RHBZ-1034578-label-partition-devices.patch   
    * Make sure that partition devices are labeled like the whole device 
  - Add 0069-UPBZ-1033791-improve-rdac-checker.patch   
    *  Use RTPG data in RDAC checker 
  - Add 0070-RHBZ-1036503-blacklist-td-devs.patch
  - Add 0071-RHBZ-1031546-strip-dev.patch   
    * make multipathd interactive commands able to handle /dev/<devnode> 
      instead of just <devnode>
  - Resolves: bz #1022899, #1031546, #1033791, #1034578, #1036503


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-58
changelog:
  - 0066-UP-dos-4k-partition-fix.patch
    * Make kpartx correctly handle 4K sector size devices with dos partitions.
  - Resolves: bz #1018439


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-57
changelog:
  - Add 0065-UPBZ-995538-fail-rdac-on-unavailable.patch
    * make rdac checker always mark paths with asymmetric access state of
      unavailable as down
  - Resolves: bz #995538


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-56
changelog:
  - Add 0064-RHBZ-1010040-fix-ID_FS-attrs.patch
    * make multipath create a timestamp file /run/multipathd/timestamp, and
      add -T<timestamp>:<valid> option to shortcut processing if the
      timestamp hasn't changed
  - Resolves: bz #1010040


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-55
changelog:
  - Add 0061-RH-display-find-mpaths.patch
  - Add 0062-RH-dont-free-vecs.patch
    * freeing vecs causes a number of races which can crash multipathd on
      shutdown.
  - Add 0063-RH-fix-warning.patch


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-54
changelog:
  - Modify 0015-RH-fix-output-buffer.patch
    * Fix memory leak
  - Add 0047-RHBZ-kpartx-read-only-loop-devs.patch
    * Fix read only loop device handling
  - Add 0048-RH-print-defaults.patch
  - Add 0049-RH-remove-ID_FS_TYPE.patch
    * remove ID_FS_TYPE udev enviroment variable for multipath devices
  - Add 0051-UP-fix-cli-resize.patch
    * check before dereferencing variables
  - Add 0052-RH-fix-bad-derefs.patch
    * setup multipath free the multipath device when it fails, so don't keep
      using it.
  - Add 0053-UP-fix-failback.patch
    * setting failback in the devices section was broken
  - Add 0054-UP-keep-udev-ref.patch
    * multipathd needs to keep the same udev object across reconfigures
  - Add 0055-UP-handle-quiesced-paths.patch
    * quiesced paths should be treated as down
  - Add 0056-UP-alua-prio-fix.patch
    * Don't count the preferred bit for paths that are active/optimized
  - Add 0057-UP-fix-tmo.patch
    * Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo.  Also
      make multipath get changing values directly from sysfs, instead of
      from udev, which caches them.
  - Add 0058-UP-fix-failback.patch
    * make failback print the default value when you show configs.
  - Add 0059-UP-flush-failure-queueing.patch
    * If you can't flush a multipath device, restore the queue_if_no_paths
      value
  - Add 0060-UP-uevent-loop-udev.patch
    * make ueventloop grab it's own udev reference, since it is cancelled
      asychnrously.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-53
changelog:
  - Add 0044-RHBZ-976688-fix-wipe-wwids.patch
    * Seek back to the start of the file after truncating it
  - Add 0045-RHBZ-977297-man-page-fix.patch
    * update man page to match actual defaults
  - Add 0046-RHBZ-883981-move-udev-rules.patch
    * move udev rules file from /lib to /usr/lib
  - Resolves: bz #883981, #976688, #977297


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-52
changelog:
  - Add 0038-RHBZ-799860-netapp-config.patch
  - Add 0039-RH-detect-prio-fix.patch
    * Don't autodetect ALUA prioritizer unless it actually can get a priority
  - Add 0040-RH-bindings-fix.patch
    * Do a better job of trying to get the first free user_friendly_name
  - Add 0041-RH-check-for-erofs.patch
    * Don't create/reload a device read-only unless doing it read/write fails
      with EROFS
  - Remove 0017-RH-fix-sigusr1.patch
    * fix signal handling upstream way instead
  - Add 0042-UP-fix-signal-handling.patch
    * uxlsnr now handles all the signals sent to multipathd. This makes its
      signal handling posix compliant, and harder to mess up.
  - Add 0043-RH-signal-waiter.patch
    * ioctl isn't a pthread cancellation point.  Send a signal to the waiter
      thread to break out of waiting in ioctl for a dm event.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-51
changelog:
  - Add 0032-RHBZ-956464-mpathconf-defaults.patch
    * fix defaults listed in usage
  - Add 0033-RHBZ-829963-e-series-conf.patch
  - Add 0034-RHBZ-851416-mpathconf-display.patch
    * display whether or not multipathd is running in the status
  - Add 0035-RHBZ-891921-list-mpp.patch
    * add a new path format wilcard to list the multipath device associated
      with a path
  - Add 0036-RHBZ-949239-load-multipath-module.patch
    * load the dm-multipath kernel module when multipathd starts
  - Add 0037-RHBZ-768873-fix-rename.patch
    * When deciding on a multipth devices name on reload, don't default to
      the existing name if there is no config file alias and user_friendly_names
      isn't set. Use the wwid.
  - Modify multipath.conf
  - Resolves: bz #768873, #950252


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-50
changelog:
  - Add 0031-RHBZ-957188-kpartx-use-dm-name.patch
    * use the basename of the devices that will be created to choose the
      delimiter instead of using the device name from the command line
  - Resolves: bz #957188


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-49
changelog:
  - Modify 0020-RHBZ-907360-static-pthread-init.patch
    * Don't initialize uevent list twice
  - Add 0029-RH-no-prio-put-msg.patch
  - Add 0030-RHBZ-916528-override-queue-no-daemon.patch
    * Default to "queue_without_daemon no"
    * Add "forcequeueing daemon" and "restorequeueing daemon" cli commands
  - Modify spec file to force queue_without_daemon when restarting
    multipathd on upgrades.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-48
changelog:
  - Add 0026-fix-checker-time.patch
    * Once multipathd hit it max checker interval, it was reverting to
      to shortest checker interval
  - Add 0027-RH-get-wwid.patch
    * Multipath wasn't correctly setting the multipath wwid when it read devices
      in from the kernel
  - Add 0028-RHBZ-929078-refresh-udev-dev.patch
    * Make multipath try to get the UID of down devices.  Also, on ev_add_path,
      make multipathd reinitialize existing devices that weren't fully
      initialized before.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-47
changelog:
  - Add 0021-RHBZ-919119-respect-kernel-cmdline.patch
    * keep the multipath.rules udev file from running and multipathd from
      starting if nompath is on the kernel command line
  - Add 0022-RH-multipathd-check-wwids.patch
    * Whenever multipath runs configure, it will check the wwids, and
      add any missing ones to the wwids file
  - Add 0023-RH-multipath-wipe-wwid.patch
    * multipath's -w command will remove a wwid from the wwids file
  - Add 0024-RH-multipath-wipe-wwids.patch
    * multipath's -W command will set reset the wwids file to just the current
      devices
  - Add 0025-UPBZ-916668_add_maj_min.patch
  - Resolves: bz #919119


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-46
changelog:
  - Add 0020-RHBZ-907360-static-pthread-init.patch
    * statically initialize the uevent pthread structures


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-45
changelog:
  - Updated to latest upstrem 0.4.9 code: multipath-tools-130222
    (git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136)
  - Refresh 0001-RH-dont_start_with_no_config.patch
  - Modify 0002-RH-multipath.rules.patch
  - Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch
  - Refresh 0004-RH-multipathd-blacklist-all-by-default.patch
  - Refresh 0005-RH-add-mpathconf.patch
  - Refresh 0006-RH-add-find-multipaths.patch
  - Add 0008-RH-revert-partition-changes.patch
  - Rename 0008-RH-RHEL5-style-partitions.patch to
  	 0009-RH-RHEL5-style-partitions.patch
  - Rename 0009-RH-dont-remove-map-on-enomem.patch to
  	 0010-RH-dont-remove-map-on-enomem.patch
  - Rename 0010-RH-deprecate-uid-gid-mode.patch to
  	 0011-RH-deprecate-uid-gid-mode.patch
  - Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch
  - Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to
           0013-RHBZ-883981-cleanup-rpmdiff-issues.patch
  - Rename 0039-RH-handle-other-sector-sizes.patch to
  	 0014-RH-handle-other-sector-sizes.patch
  - Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch
  - Add 0016-RH-dont-print-ghost-messages.patch
  - Add 0017-RH-fix-sigusr1.patch
    * Actually this fixes a number of issues related to signals
  - Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch
    * just the part that isn't upstream
  - Add 0019-RH-fix-sockets.patch
    * makes abstract multipathd a cli sockets use the correct name.
  - Set find_multipaths in the default config


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-44
changelog:
  - Add 0036-UP-fix-state-handling.patch
    * handle transport-offline and quiesce sysfs state
  - Add 0037-UP-fix-params-size.patch
  - Add 0038-RH-fix-multipath.rules.patch
    * make sure multipath's link priority gets increased
  - Add 0039-RH-handle-other-sector-sizes.patch
    * allow gpt partitions on 4k sector size block devices.
  - Add 0040-RH-fix-output-buffer.patch
    * fix multipath -ll for large configuration.


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-42
changelog:
  - Add 0034-RHBZ-887737-check-for-null-key.patch
  - Add 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch
    * Compile multipathd with full RELRO and PIE and install to /usr


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-41
changelog:
  - Add 0033-RH-dont-disable-libdm-failback-for-sync-case.patch
    * make kpartx -s and multipath use libdm failback device creation, so
      that they work in environments without udev


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-40
changelog:
  - Add 0032-RH-make-path-fd-readonly.patch
    * revert change made when adding persistent reservations, so that path fds
      are again opened O_RDONLY


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-38
changelog:
  - Add 0026-RH-fix-mpathpersist-fns.patch
  - Add 0027-RH-default-partition-delimiters.patch
    * Only use the -p delimiter when the device name ends in a number
  - Add 0028-RH-storagetek-config.patch
  - Add 0029-RH-kpartx-retry.patch
    * retry delete on busy loop devices
  - Add 0030-RH-early-blacklist.patch
    * multipath will now blacklist devices by device type and wwid in
      store_pathinfo, so that it doesn't do a bunch of unnecessary work
      on paths that it would only be removing later on.


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-35
changelog:
  - Add 0022-RHBZ-864368-disable-libdm-failback.patch
    * make kpartx and multiapthd disable libdm failback device creation
  - Add 0023-RHBZ-866291-update-documentation.patch
  - Resolves: bz #864368, #866291


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-33
changelog:
  - Modify 0016-RH-retain_hwhandler.patch
    * Check the dm-multipath module version, and don't enable
      retain_attached_hw_handler if the kernel doesn't support it
  - Add 0019-RH-detect-prio.patch
    * add detect_prio option, to make multipath check if the device
      supports the ALUA prio, before defaulting to the configured prio
  - Remove 0017-RH-netapp_config.patch
  - Add 0020-RH-netapp-config.patch
    * new netapp config that uses retain_attached_hw_handler and
      detect_prio to autoconfigure ALUA and non-ALUA devices.


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-32
changelog:
  - Modified 0018-RH-remove-config-dups.patch
    * Made modified config remove original only if the vendor/product
      exactly match


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-31
changelog:
  - Add 0014-RH-dm_reassign.patch
    * Fix reassign_maps option
  - Add 0015-RH-selector_change.patch
    * devices default to using service-time selector
  - Add 0016-RH-retain_hwhandler.patch
    * add retain_attached_hw_handler option, to let multipath keep an
      already attached scsi device handler
  - Add 0017-RH-netapp_config.patch
  - Add 0018-RH-remove-config-dups.patch
    * Clean up duplicates in the devices and blacklist sections


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-29
changelog:
  - Updated to latest upstrem 0.4.9 code: multipath-tools-120821.tgz
    (git commit id: 050b24b33d3c60e29f7820d2fb75e84a9edde528)
    * includes 0001-RH-remove_callout.patch, 0002-RH-add-wwids-file.patch,
      0003-RH-add-followover.patch, 0004-RH-fix-cciss-names.patch
  - Add 0013-RH-kpartx-msg.patch
  - Modify 0002-RH-multipath.rules.patch
    * removed socket call from rules file


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-27
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-120613.tgz
    (git commit id: cb0f7127ba90ab5e8e71fc534a0a16cdbe96a88f)
  - Add 0001-RH-remove_callout.patch
    * multipath no longer uses the getuid callout.  It now gets the
      wwid from the udev database or the environment variables
  - Add 0004-RH-fix-cciss-names.patch
    * convert cciss device names from cciss/cXdY to sysfs style cciss!cXdY
  - Split 0009-RH-add-find-multipaths.patch into 0002-RH-add-wwids-file.patch
          and 0010-RH-add-find-multipaths.patch
  - Add 0016-RH-change-configs.patch
    * default fast_io_fail to 5 and don't set the path selector in the
      builtin configs.
  Resolves: bz #831978


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-22
changelog:
  - Add 0012-RH-update-on-show-topology.patch
  - Add 0013-RH-manpage-update.patch
  - Add 0014-RH-RHEL5-style-partitions.patch
  - Add 0015-RH-add-followover.patch
  - Add 0016-RH-dont-remove-map-on-enomem.patch
  - Add 0017-RH-fix-shutdown-crash.patch
  - Add 0018-RH-warn-on-bad-dev-loss-tmo.patch
  - Add 0019-RH-deprecate-uid-gid-mode.patch
  - Add 0020-RH-dont-remove-map-twice.patch
  - Add 0021-RH-validate-guid-partitions.patch
  - Add 0022-RH-adjust-messages.patch
  - Add 0023-RH-manpage-update.patch


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-21
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-120123.tgz
    (git commit id: 63704387009443bdb37d9deaaafa9ab121d45bfb)
  - Add 0001-RH-fix-async-tur.patch
  - Add 0002-RH-dont_start_with_no_config.patch
  - Add 0003-RH-multipath.rules.patch
  - Add 0004-RH-update-init-script.patch
  - Add 0005-RH-cciss_id.patch
  - Add 0006-RH-Make-build-system-RH-Fedora-friendly.patch
  - Add 0007-RH-multipathd-blacklist-all-by-default.patch
  - Add 0008-RH-add-mpathconf.patch
  - Add 0009-RH-add-find-multipaths.patch
  - Add 0010-RH-check-if-multipath-owns-path.patch
  - Add 0011-RH-add-hp_tur-checker.patch


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-19
changelog:
  - Modify 0103-add-disable-sync-option.patch
  - Add 0104-RHBZ-737989-systemd-unit-fix.patch
    * systemd will only start multipathd if /etc/multipath.conf exists
  - Add 0105-fix-oom-adj.patch
    * first try setting oom_score_adj


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-17
changelog:
  - Add 0103-add-disable-sync-option.patch
    * add a -n (nosync) option to multipath. This disables synchronous
      file creation with udev.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-16
changelog:
  - Modify 0012-RH-udev-sync-support.patch
  - Modify 0021-RHBZ-548874-add-find-multipaths.patch
  - Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch
  - Add 0025-RHBZ-508827-update-multipathd-manpage.patch through
        0101-RHBZ-631009-disable-udev-disk-rules-on-reload.patch
    * sync with current state of RHEL6. Next release should include a updated
      source tarball with most of these fixes rolled in.
  - Add 0102-RHBZ-690828-systemd-unit-file.patch
    * Add Jóhann B. Guðmundsson's unit file for systemd.
    * Add sub-package sysvinit for SysV init script.
  - Resolves: bz #690828


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-14
changelog:
  - Modify 0021-RHBZ-548874-add-find-multipaths.patch
    * fix bug where mpathconf wouldn't create a multpath.conf file unless one
      already existed.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-13
changelog:
  - Replace 0012-RH-explicitly-disable-dm-udev-sync-support-in-kpartx.patch
    with 0012-RH-udev-sync-support.patch
    * Add udev sync support to kpartx and multipath. In kpartx it is disabled
      unless you use the -s option.
  - Refresh 0013-RH-add-weighted_prio-prioritizer.patch
  - Refresh 0021-RHBZ-548874-add-find-multipaths.patch
  - Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch
    * kpartx now creates a 2 sector large device for dos extended
      partitions, just like the kernel does on the regular block devices.
  - Add 0023-RHBZ-557810-emc-invista-config.patch
  - Add 0024-RHBZ-565933-checker-timeout.patch
    * Multipath has a new option checker_timeout. If this is not set, 
      all path checker functions with explicit timeouts use
      /sys/block/sd<x>/device/timeout. If this is set, they use it instead.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-12
changelog:
  - Refresh 0001-RH-queue-without-daemon.patch
  - Refresh 0002-RH-path-checker.patch
  - Modify 0010-RH-multipath-rules-udev-changes.patch
    * Fix udev rules to use DM_SBIN_PATH when calling kpartx
    * install udev rules to /lib/udev/rules.d instead of /etc/udev/rules.d
  - Modify 0014-RH-add-hp_tur-checker.patch
  - Add 0003-for-upstream-default-configs.patch
  - Add 0016-RHBZ-554561-fix-init-error-msg.patch
  - Add 0017-RHBZ-554592-man-page-note.patch
  - Add 0018-RHBZ-554596-SUN-6540-config.patch
  - Add 0019-RHBZ-554598-fix-multipath-locking.patch
  - Add 0020-RHBZ-554605-fix-manual-failover.patch
  - Add 0021-RHBZ-548874-add-find-multipaths.patch
    * Added find_multipaths multipath.conf option
    * Added /sbin/mpathconf for simple editting of multipath.conf
  - Add 0022-RHBZ-557845-RHEL5-style-partitions.patch
    * Make kpartx deal with logical partitions like it did in RHEL5.
      Don't create a dm-device for the extended partition itself.
      Create the logical partitions on top of the dm-device for the whole disk.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-11
changelog:
  - Add 0002-for-upstream-add-tmo-config-options.patch
    * Add fail_io_fail_tmo and dev_loss_tmo multipath.conf options
  - Add 0013-RH-add-weighted_prio-prioritizer.patch
  - Add 0014-RH-add-hp_tur-checker.patch
  - Add 0015-RH-add-multipathd-count-paths-cmd.patch
  - rename multipath.conf.redhat to multipath.conf, and remove the default
    blacklist.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-10
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-091027.tar.gz
    (git commit id: a946bd4e2a529e5fba9c9547d03d3f91806618a3)
  - Drop unrequired for-upstream patches.
  - BuildRequires and Requires new device-mapper version for udev sync support.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-8
changelog:
  - Split patches in "for-upstream" and "RH" series.
  - Replace 0011-RH-multipathd-blacklist-all-by-default.patch with
    version from Benjamin Marzinski.
  - Update udev rules 0010-RH-multipath-rules-udev-changes.patch.
  - rpmlint cleanup:
    * Drop useless-provides kpartx.
    * Cleanup tab vs spaces usage.
    * Summary not capitalized.
    * Missing docs in libs package.
    * Fix init script LSB headers.
  - Drop README* files from doc sections (they are empty).


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-7
changelog:
  - Add patch 0010-RH-Set-friendly-defaults.patch:
    * set rcdir to fedora default.
    * do not install kpartx udev bits.
    * install redhat init script.
    * Cleanup spec file install target.
  - Add patch 0011-RH-multipathd-blacklist-all-by-default.patch:
    * Fix BZ#528059
    * Stop installing default config in /etc and move it to the doc dir.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-6
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-091013.tar.gz
    (git commit id: aa0a885e1f19359c41b63151bfcface38ccca176)
  - Drop, now upstream, patches:
    * fix_missed_uevs.patch.
    * log_all_messages.patch.
    * uninstall.patch.
    * select_lib.patch.
    * directio_message_cleanup.patch.
    * stop_warnings.patch.
  - Drop redhatification.patch in favour of spec file hacks.
  - Drop mpath_wait.patch: no longer required.
  - Merge multipath_rules.patch and udev_change.patch.
  - Rename all patches based on source.
  - Add patch 0009-RH-fix-hp-sw-hardware-table-entries.patch to fix
    default entry for hp_sw and match current kernel.
  - Add multipath.conf.redhat as source instead of patch.
  - spec file:
    * divide runtime and build/setup bits.
    * update BuildRoot.
    * update install section to apply all the little hacks here and there,
      in favour of patches against upstream.
    * move ldconfig invokation to libs package where it belong.
    * fix libs package directory ownership and files.


author: Benjamin Marzinski <bmarzins@redhat.com> - 0.4.9-5
changelog:
  - Fixed problem where maps were being added and then removed.
  - Changed the udev rules to fix some issues.


author: Benjamin Marzinski <bmarzins@redhat.com> - 0.4.9-3
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-090729.tgz
    (git commit id: d678c139719d5631194b50e49f16ca97162ecd0f)
  - moved multipath bindings file from /var/lib/multipath to /etc/multipath
  - Fixed 354961, 432520


author: Mike Snitzer <snitzer@redhat.com> - 0.4.9-1
changelog:
  - Updated to latest upstream 0.4.9 code: multipath-tools-090429.tgz
    (git commit id: 7395bcda3a218df2eab1617df54628af0dc3456e)
  - split the multipath libs out to a device-mapper-multipath-libs package
  - if appropriate, install multipath libs in /lib64 and /lib64/multipath


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.8-7
changelog:
  - Since libaio is now in /lib, not /usr/lib, multipath no longer needs to
    statically link against it. Fixed an error with binding file and WWIDs
    that include spaces. Cleaned up the messages from the directio checker
    function.  Fixed the udev rules. Fixed a regression in multipath.conf
    parsing
  - Fixed 457530, 457589


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.8-6
changelog:
  - Updated to latest upstream 0.4.8 code: multipath-tools-080804.tgz
    (git commit id: eb87cbd0df8adf61d1c74c025f7326d833350f78)
  - fixed 451817, 456397 (scsi_id_change.patch), 457530 (config_space_fix.patch)
    457589 (static_libaio.patch)


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.8-1
changelog:
  - Updated to latest Upstream 0.4.8 code: multipath-tools-080519.tgz
    (git commit id: 42704728855376d2f7da2de1967d7bc71bc54a2f)


author: Peter Jones <pjones@redhat.com> - 0.4.7-4.1
changelog:
  - Split kpartx out into its own package so dmraid can use it without
    installing multipathd
  - Fix a segfault in kpartx


author: Kamil Dudka <kdudka@redhat.com> 1.8.0-2
changelog:
  - fix integer overflow in keyboard interactive handling that allows out-of-bounds writes (CVE-2019-3863)
  - fix out-of-bounds memory comparison with specially crafted message channel request (CVE-2019-3862)
  - fix out-of-bounds reads with specially crafted SSH packets (CVE-2019-3861)
  - fix zero-byte allocation in SFTP packet processing resulting in out-of-bounds read (CVE-2019-3858)
  - fix integer overflow in SSH packet processing channel resulting in out of bounds write (CVE-2019-3857)
  - fix integer overflow in keyboard interactive handling resulting in out of bounds write (CVE-2019-3856)
  - fix integer overflow in transport read resulting in out of bounds write (CVE-2019-3855)


author: Kamil Dudka <kdudka@redhat.com> 1.4.3-12
changelog:
  - session: avoid printing misleading debug messages (#1503294)
  - scp: send valid commands for remote execution (#1489733)


author: Kamil Dudka <kdudka@redhat.com> 1.4.3-9
changelog:
  - curl consumes too much memory during scp download (#1080459)
  - prevent a not-connected agent from closing STDIN (#1147717)


author: Paul Howarth <paul@city-fan.org> 1.4.3-1
changelog:
  - Update to 1.4.3
    - compression: add support for zlib@openssh.com
    - sftp_read: return error if a too large package arrives
    - libssh2_hostkey_hash.3: update the description of return value
    - Fixed MSVC NMakefile
    - examples: use stderr for messages, stdout for data
    - openssl: do not leak memory when handling errors
    - improved handling of disabled MD5 algorithm in OpenSSL
    - known_hosts: Fail when parsing unknown keys in known_hosts file
    - configure: gcrypt doesn't come with pkg-config support
    - session_free: wrong variable used for keeping state
    - libssh2_userauth_publickey_fromfile_ex.3: mention publickey == NULL
    - comp_method_zlib_decomp: handle Z_BUF_ERROR when inflating
  - Drop upstreamed patches


author: Kamil Dudka <kdudka@redhat.com> 1.4.2-4
changelog:
  - examples: use stderr for messages, stdout for data (upstream commit b31e35ab)
  - Update libssh2_hostkey_hash(3) man page (upstream commit fe8f3deb)


author: Kamil Dudka <kdudka@redhat.com> 1.4.2-3
changelog:
  - Fix basic functionality of libssh2 in FIPS mode
  - Skip SELinux-related quirks on recent distros to prevent a test-suite failure


author: Paul Howarth <paul@city-fan.org> 1.4.2-1
changelog:
  - Update to 1.4.2
    - Return LIBSSH2_ERROR_SOCKET_DISCONNECT on EOF when reading banner
    - userauth.c: fread() from public key file to correctly detect any errors
    - configure.ac: add option to disable build of the example applications
    - added 'Requires.private:' line to libssh2.pc
    - SFTP: filter off incoming "zombie" responses
    - gettimeofday: no need for a replacement under cygwin
    - SSH_MSG_CHANNEL_REQUEST: default to want_reply
    - win32/libssh2_config.h: remove hardcoded #define LIBSSH2_HAVE_ZLIB


author: Paul Howarth <paul@city-fan.org> 1.4.1-1
changelog:
  - Update to 1.4.1
    - Build error with gcrypt backend
    - Always do "forced" window updates to avoid corner case stalls
    - aes: the init function fails when OpenSSL has AES support
    - transport_send: finish in-progress key exchange before sending data
    - channel_write: acknowledge transport errors
    - examples/x11.c: make sure sizeof passed to read operation is correct
    - examples/x11.c: fix suspicious sizeof usage
    - sftp_packet_add: verify the packet before accepting it
    - SFTP: preserve the original error code more
    - sftp_packet_read: adjust window size as necessary
    - Use safer snprintf rather then sprintf in several places
    - Define and use LIBSSH2_INVALID_SOCKET instead of INVALID_SOCKET
    - sftp_write: cannot return acked data *and* EAGAIN
    - sftp_read: avoid data *and* EAGAIN
    - libssh2.h: add missing prototype for libssh2_session_banner_set()
  - Drop upstream patches now included in release tarball


author: Paul Howarth <paul@city-fan.org> 1.4.0-3
changelog:
  - Don't try to use openssl's AES-CTR functions
    (http://www.libssh2.org/mail/libssh2-devel-archive-2012-03/0111.shtml)


author: Paul Howarth <paul@city-fan.org> 1.4.0-2
changelog:
  - fix libssh2 failing key re-exchange when write channel is saturated (#804156)
  - drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> 1.4.0-1
changelog:
  - update to 1.4.0
    - added libssh2_session_supported_algs()
    - added libssh2_session_banner_get()
    - added libssh2_sftp_get_channel()
    - libssh2.h: bump the default window size to 256K
    - sftp-seek: clear EOF flag
    - userauth: provide more informations if ssh pub key extraction fails
    - ssh2_exec: skip error outputs for EAGAIN
    - LIBSSH2_SFTP_PACKET_MAXLEN: increase to 80000
    - knownhost_check(): don't dereference ext if NULL is passed
    - knownhost_add: avoid dereferencing uninitialized memory on error path
    - OpenSSL EVP: fix threaded use of structs
    - _libssh2_channel_read: react on errors from receive_window_adjust
    - sftp_read: cap the read ahead maximum amount
    - _libssh2_channel_read: fix non-blocking window adjusting 
  - add upstream patch fixing undefined function reference in libgcrypt backend
  - BR: /usr/bin/man for test suite


author: Paul Howarth <paul@city-fan.org> 1.3.0-3
changelog:
  - make docs package noarch where possible
  - example includes arch-specific bits, so move to devel package
  - use patch rather than scripted iconv to fix character encoding
  - don't make assumptions about SELinux context types used for the ssh server
    in the test suite
  - skip the ssh test if /dev/tty isn't present, as in some versions of mock
  - make the %files list more explicit
  - use tabs for indentation


author: Kamil Dudka <kdudka@redhat.com> 1.2.7-1
changelog:
  - update to 1.2.7 (#632916)
  - avoid multilib conflict on libssh2-docs
  - avoid build failure in mock with SELinux in the enforcing mode (#558964)


author: Chris Weyl <cweyl@alumni.drew.edu> 1.2.4-1
changelog:
  - update to 1.2.4
  - drop old patch0
  - be more aggressive about keeping .deps from intruding into -docs


author: Chris Spike <chris.spike@arcor.de> 1.4-5
changelog:
  - Removed maven* BRs in favour of apache-commons-parent
  - Added deprecated groupId to depmap for compatibility reasons
  - Removed commons-pool from custom depmap


author: Adam Tkac <atkac redhat com> - 1.6.6-1
changelog:
  - update to 1.6.6
  - paches merged
    - enscript-1.6.4-hilight.patch
    - enscript-1.6.4-rh457719.patch


author: Adam Tkac <atkac redhat com> - 1.6.5.1-1
changelog:
  - update to 1.6.5.1
  - patches merged
    - enscript-1.6.1-config.patch
    - enscript-doublefree.patch
    - enscript-1.6.1-CAN-2004-1185.patch
    - enscript-1.6.1-CAN-2004-1186.patch
    - enscript-CVE-2008-3863+CVE-2008-4306.patch
  - license changed to GPLv3+
  - add gettext to BuildRequires


author: Adam Tkac <atkac redhat com> - 1.6.4-15
changelog:
  - ship postscript files with .eps extension (#505775)
  - merge review fixes (#225729)
  - improve enscript-1.6.1-config.patch


author: Adam Tkac <atkac redhat com> 1.6.4-10
changelog:
  - updated patches due rpm 4.6
  - enscript -w is handled well (#457719)
  - mkafmmap -V is handled well (#457720)


author: Tim Waugh <twaugh@redhat.com> 1.6.1-29
changelog:
  - Applied patch to fix CAN-2004-1186 (bug #144684).
  - Applied patch to fix CAN-2004-1185 (bug #144684).
  - Backported patch to fix CAN-2004-1184 (bug #144684).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Removed mail patch.  It was included to be more compatible with an
    lpr we no longer ship.  Fixes bug #108762.


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.3.1-6
changelog:
  - Merge bugfixes from Kubuntu, fixes circular scrolling and more (#633353)
  - Drop default kcmtouchpadrc, use driver defaults (#611611)
  - Make the Scrolling tab use a vertical scrollbar if needed (#600121)


author: Ryan Rix <ry@n.rix.si> - 0.3.1-3
changelog:
  - Update the category to adhere to new SC 4.5 systemsettings layout. Will now
    appear under the "input devices" section.


author: Bastien Nocera <bnocera@redhat.com> - 3.26.2-9
changelog:
  + gnome-settings-daemon-3.26.2-9
  - Revert automatic suspend after inactivity, it was rejected
  - Related: #1449171


author: Ray Strode <rstrode@redhat.com> - 3.26.2-7
changelog:
  - Fix logic error in password expiration notification bubble
    Resolves: #1530659
    Related: 1314443


author: Richard Hughes <rhughes@redhat.com> - 3.10.0-2
changelog:
  - Grab a patch from upstream to fix the multiple notifications about updates.
  - Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009132


author: Richard Hughes <rhughes@redhat.com> - 3.9.91.1-2
changelog:
  - Grab a patch from upstream so that the offline updates feature can
    actually work when reboot returns with success.


author: Kalev Lember <kalevlember@gmail.com> - 3.9.5-1
changelog:
  - Update to 3.9.5
  - Remove empty /etc/gnome-settings-daemon directory
  - Install new rfkill plugin and add back the smartcard plugin


author: Kalev Lember <kalevlember@gmail.com> - 3.9.2-1
changelog:
  - Update to 3.9.2
  - Drop the ibus-kkc-libpinyin patch; the hardcoded input sources
    list is gone from g-s-d
  - Set the minimum required gnome-desktop3 version


author: Adam Williamson <awilliam@redhat.com> - 3.2.0-2
changelog:
  - backport some greatest hits from git to stop the same bugs being
    reported over and over (all will be in 3.2.1)


author: Peter Hutterer <peter.hutterer@redhat.com> 2.28.1-2
changelog:
  - left-handed-touchpad.patch: change physical touchpad buttons to
    left-handed, not tapping though (#498249)


author: Peter Hutterer <peter.hutterer@redhat.com> 2.27.91-2
changelog:
  - buttonmapping.patch: Don't check for IsXExtensionDevice, only skip button
    mappings for core devices instead (#502129).


author: Bastien Nocera <bnocera@redhat.com> 2.26.1-3
changelog:
  - Don't set touchpads to be left-handed, otherwise the tap
    behaves like the 2nd mouse button (#483639)


author: Ray Strode <rstrode@redhat.com> - 2.25.2-9
changelog:
  - Don't call SetPointerMapping when using Xinput since
    it duplicates effort but gets touchpads wrong (bug 324721)


author: Ray Strode <rstrode@redhat.com> - 2.25.2-6
changelog:
  - Listen for DeviceAdded signals when configuring mouse
    (in addition to DeviceEnabled).  This may help with
    bug 474758.


author: Lennart Poettering <lpoetter@redhat.com> - 2.23.6-2
changelog:
  - Apply patch from gnome bug 545386. This hasn't been accepted in this form yet
    by upstream, will however very likely be merged in a similar form.
  - Disable esd/sounds module since we don't need it to start PA anymore


author: Colin Walters <walters@redhat.com> - 2.23.3-2
changelog:
  - Add (now upstreamed) patch to legacy ESD preference; see
    http://bugzilla.gnome.org/show_bug.cgi?id=533198
    https://bugzilla.redhat.com/show_bug.cgi?id=430624


author: Ray Strode <rstrode@redhat.com> - 2.21.92-3
changelog:
  - Don't set keyboard model on startup from gconf if evdev is being used.
    Evdev needs to use its own keyboard model to work right.


author: Soren Sandmann <sandmann@redhat.com> - 2.21.91-3
changelog:
  - Add patch to make the xrandr plugin listen for client messages from
    the control panel and reread the configuration file.


author: Bill Nottingham <notting@redhat.com> - 2.86-11
changelog:
  - fix warning on SELinux policy load failure (#185603)
  - don't package /dev/initctl (#174652, #199939)
  - allow some time for failed console opens to resolve themselves (#181546)
  - add documentation of -f to last(1) (#192804)


author: Bill Nottingham <notting@redhat.com> - 2.86-9
changelog:
  - preserve 'WAITING' across re-exec (#143289, others)
  - actually apply quiet patch
  - don't write garbage to utmp on x86-64 (#176494)


author: Bill Nottingham <notting@redhat.com> - 2.86-1
changelog:
  - update to upstream 2.86
  - adjust patches
  - install initreq.h (#119039)
  - allow halt/reboot to handle being called by login correctly (#104062, <worley@theworld.com>)
  - document pam_console usage for halt (#114970)


author: Bill Nottingham <notting@redhat.com> - 2.85-38
changelog:
  - pidof: use readlink instead of stat to avoid NFS hangs (#138788, <constgq@yahoo.com))
  - pidof: fix handling of scripts (#85796)
  - pidof: add -c option for only matching processes with the same root (<twoerner@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 2.85-37
changelog:
  - add patch for SELinux user configs (<dwalsh@redhat.com>)
  - disable readlink patch while it's being fixed


author: Bill Nottingham <notting@redhat.com> 2.85-22
changelog:
  - move /selinux to filesystem
  - print out warning if we're terminating because of enforcing + no policy
  - handle non-selinux kernels better (#118826)


author: Arjan van de Ven <arjanv@redhat.com>
changelog:
  - fix wait() handling wrt setting SIGCHLD to SIG_IGN in shutdown
  - fix segfault in spawn() function in shutdown


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't strip binaries
  - have wall not write to non-ttys (#65412)
  - update usage for halt/reboot (#57753)
  - allow '-t' argument to last for checking state at certain times (#56863)
  - make 'pidof /foo/bar' not match /baz/bar (#53918)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - show users with no login pid but no logout record as gone (#42550,
    <cwolf@starclass.com>)
  - fix sulogin to *always* work without a tty (#40934)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - document '-n' option to wall, make it root-only (#18672)
  - don't open files in sulogin unless they're really ttys (#21862)


author: Chris Evans <chris@ferret.lmh.ox.ac.uk>
changelog:
  - Fix a securelevel releated security hole. Go on, try and break append
    only files + securelevel now ;-)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fixed the MD5 check in sulogin (128 hash bits encoded with base64 gives
    22 bytes, not 24...). Fix in -md5.patch


author: Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>
changelog:
  - /etc/initrunlvl gets linked to /tmp/init-root/var/run/initrunlvl which is
    just plain wrong..
  - /usr/bin/utmpdump was missing in the files section, although it was
    explicitly patched into PROGS.
  - added attr's to the files section.
  - various small fixes.


author: Miloslav Trmač <mitr@redhat.com> - 0.21.1-17
changelog:
  - Fix spurious failures of test_cookie_str_changed_mac
    Resolves: #1073950
  - Add support for IP addresses in subjectAltName
    Resolves: #1080142


author: Miloslav Trmač <mitr@redhat.com> - 0.21.1-14
changelog:
  - Don't assume that export ciphers are enabled in the test suite
    Resolves: #1048887
  - Let the kernel allocate free ports for use by the test suite
    Resolves: #1048887


author: Miloslav Trmač <mitr@redhat.com> - 0.21.1-12
changelog:
  - Fix occasional spurious failures in test_makefile_timeout_fires
    Resolves: #969077
  - Fix incorrect exception handling of SSL_CTX_new (manifesting in FIPS mode)
    Resolves: #879043
  - Add minimal SNI support, based on a patch by Sander Steffann
    <sander@steffann.nl>
    Resolves: #1038795
  - Use only ECC curves available in Fedora in the test suite
    Related: #1038813
  - Fix terminating test suite helper processes when running in Koji
    Related: #1038813
  - Run test suite in %check, don't ship it in the package.  Based on a patch by
    Matěj Cepl <mcepl@redhat.com>.
    Resolves: #1038813


author: Miloslav Trmač <mitr@redhat.com> - 0.21.1-10
changelog:
  - Replace expired certificates in the test suite
  - Fix running the test suite against recent OpenSSL versions


author: Garrett Holmstrom <gholms@fedoraproject.org> - 0.21.1-3
changelog:
  - Use the %__python macro for Python calls and locations
    Patch by Garrett Holmstrom <gholms@fedoraproject.org>


author: Miloslav Trmač <mitr@redhat.com> - 0.19.1-7
changelog:
  - Only send the selector in SSL HTTP requests.  Patch by James Bowes
    <jbowes@redhat.com>.
    Resolves: #491674


author: Miloslav Trmač <mitr@redhat.com> - 0.19.1-5
changelog:
  - Close the connection when an m2urllib2 response is closed
    Resolves: #460692
  - Work around conflicts between macros defined by gcc and swig


author: Miloslav Trmač <mitr@redhat.com> - 0.18.2-6
changelog:
  - Don't remove the User-Agent header from proxied requests
    Related: #448858
  - Update m2urllib2.py to work with Python 2.5


author: Miloslav Trmač <mitr@redhat.com> - 0.18-2
changelog:
  - Add missing Host: header to CONNECT requests (patch by Karl Grindley)
    Resolves: #239034
  - Fix License:


author: Miloslav Trmac <mitr@redhat.com> - 0.16-6
changelog:
  - Add support for SSL socket timeouts (based on a patch by James Bowes
    <jbowes@redhat.com>)
    Resolves: #219966


author: Miloslav Trmac <mitr@redhat.com> - 0.16-5
changelog:
  - Backport the urllib2 wrapper (code by James Bowes <jbowes@redhat.com>)
    Resolves: #210956
  - Add proxy support for https using CONNECT (original patch by James Bowes
    <jbowes@redhat.com>)
    Resolves: #210963


author: Miloslav Trmac <mitr@redhat.com> - 0.16-4
changelog:
  - Drop Obsoletes: openssl-python, openssl-python was last shipped in RHL 7.1
  - Fix interpreter paths in demos


author: Miloslav Trmac <mitr@redhat.com> - 0.13-3
changelog:
  - Fix invalid Python version comparisons in M2Crypto.httpslib (#156979)
  - Don't ship obsolete xmlrpclib.py.patch
  - Clean up the build process a bit


author: Nalin Dahyabhai <nalin@redhat.com> 0.09-1
changelog:
  - Update to version 0.09
  - Build using bundled copy of SWIG
  - Pick up additional CFLAGS and LDFLAGS from OpenSSL's pkgconfig data, if
    there is any
  - Handle const changes in new OpenSSL
  - Remove unnecessary ldconfig calls in post/postun


author: Jarod Wilson <jarod@redhat.com> - 2.2-1.5
changelog:
  - Update mvapich23 (TrueScale) bits to 2.3 release
  - Fix libmpi.a being built w/o -fPIC
  - Resolves: #1625672


author: Michal Schmidt <mschmidt@redhat.com> - 2.2-0.1.rc1
changelog:
  - Update to 2.2rc1
  - Includes -psm2 variant for Intel OPA.
  - Still build the previous version for compatibility, as 2.0 subpackages.
  - Resolves: #948504
  - Resolves: #1093453
  - Resolves: #1173318


author: Kyle McMartin <kmcmarti@redhat.com> - 2.0a-3
changelog:
  - aarch64: add get_cycles implementation since <asm/timex.h> is not
    an exported header.
  - Resolves: #1100046


author: Jay Fenlason <fenlason@redhat.com> 2.0a-1
changelog:
  - Add Build Requires on autoconf, automake, libtool,
    perl-Digest-MD5, hwloc-devel, and libibmad-devel.
  - remove build requires on java
  - New upstream version, edited so it can pass a license audit.
    Resolves: rhbz1001718


author: Jay Fenlason <fenlason@redhat.com> 1.8-3
changelog:
  - Move the module files to the (correct for RHEL-7) mpi/ directory.
  - Add MANPATH to the module files.


author: Jay Fenlason <fenlason@redhat.com> 1.8-2
changelog:
  - Add BuildRequires on flex and bison
  - Add "export AR=ar" to allow builds on RHEL-7 to work.
    Resolves: rhbz822527


author: Jay Fenlason <fenlason@redhat.com> 1.8-1
changelog:
  - New upstream version, with man pages again.
    This fixes the following bugs:
    Related: rhbz739138
    Resolves: rhbz613696
    Resolves: rhbz625620
    Resolves: rhbz735954
    Resolves: rhbz782263


author: Jay Fenlason <fenlason@redhat.com> 1.6-3.el6
changelog:
  - Change the requires on mvapich2-psm-devel to mvapich2-psm from mvapich2
    so that mpitests will build
  - clean up the build to not use .{non-}psm directories.
    Related: rhbz725016


author: Jay Fenlason <fenlason@redhat.com> 1.6-2.el6
changelog:
  - Fix the psm RPM macros so that we can build a -psm variant of
    mpitests
  - remove the osu-micro-benchmarks, which are being installed with a
    bogus rpath, and which are included in mpitests
    Related: rhbz725016


author: Jay Fenlason <fenlason@redhat.com> 1.6-1.el6
changelog:
  - New upstream release, with different build process, and without
    man pages, because we don't have the sowing package, and its
    licensing status is unclear (no licence description of any kind in
    the tarball).
    Related: rhbz725016


author: Jay Fenlason <fenlason@redhat.com> 1.4-4.el6
changelog:
  - Move -devel requires to the -devel subpackage.
    Resolves: bz568450
  - Add defattr as required by packaging guidelines
    Related: bz555835


author: Doug Ledford <dledford@redhat.com> - 1.4-3.el6
changelog:
  - Fix an issue with usage of _cc_name_suffix that caused a broken define in
    our module file
    Related: bz543948


author: Jay Fenlason <fenlason@redhat.com> 1.4-2.el6
changelog:
  - Add BuildRequires: python
  - Add BuildRequires: java
  - Remove the pkgconfig file entirely
    Related: bz543948


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Add Group: to -devel
  - Split into subpackages as required by packaging guidelines
  - cleanup BuildRequires
  - attempt to build on ppc
  - cleanup spec file
  - cleanup mvapich2.pc, still not correct, but closer
    Related: bz543948


author: Doug Ledford <dledford@redhat.com> - 1.0.3-2
changelog:
  - Make scriptlets match mvapich
  - Include a Requires(post) and Requires(preun) so installs work properly
  - Resolves: bz465448


author: Petr Pisar <ppisar@redhat.com> - 0.033-2
changelog:
  - Croak on failed write into a file (bug #1031096)
  - Do not use already existing temporary files (bug #1031096)


author: EL Errata <el-errata_ww@oracle.com> - 0.61.15.75-1.0.1
changelog:
  - Check for oracle-release file first when attempting to determine version [Orabug: 18493611] (Kevin Lyons)
  - Added bug30138855-remove-upstream-references.patch [Orabug: 30138855]


author: Vojtech Trefny <vtrefny@redhat.com> - 0.61.15.75-1
changelog:
  - Always set default key size to 512 bits for ciphers with XTS mode (vtrefny)
    Resolves: rhbz#1716674


author: David Lehman <dlehman@redhat.com> - 0.61.15.74-1
changelog:
  - Handle exceptions raised from parted.Disk ctor. (dlehman)
    Related: rhbz#1677383
  - Recommend DASD disk label for disks with an existing DASD label (vtrefny)
    Resolves: rhbz#1677383


author: Vojtech Trefny <vtrefny@redhat.com> - 0.61.15.73-1
changelog:
  - Use --yes when calling pvresize (vtrefny)
    Related: rhbz#1657000
  - Fix typo in partitioning test cleanup. (dlehman)
    Related: rhbz#1657000
  - Remove selinux test that doesn't do anything meaningful. (dlehman)
    Related: rhbz#1657000
  - Improve parsing of mdadm detail output. (dlehman)
    Related: rhbz#1657000
  - Update btrfs tests to use sufficiently large loop devices. (dlehman)
    Related: rhbz#1657000
  - vfat labels apparently cannot contain lower case characters. (dlehman)
    Related: rhbz#1657000
  - Check label format regardless of mechanism used to set it. (dlehman)
    Related: rhbz#1657000
  - Adapt to presence or absence of python-mock. (dlehman)
    Related: rhbz#1657000
  - Fixed KS forcing zerombr onto RO disk (japokorn)
    Resolves: rhbz#1544425
  - Tell LVM to wipe cachepool metadata when attaching the cachepool (vtrefny)
    Resolves: rhbz#1643531
  - Add dependency on python-six (vtrefny)
    Resolves: rhbz#1647173


author: Vojtech Trefny <vtrefny@redhat.com> - 0.61.15.72-1
changelog:
  - Install ndctl when NVDIMMs are used. (dlehman)
    Related: rhbz#1600496
  - Escape dots in lvm filter devices (vtrefny)
    Resolves: rhbz#1614039


author: David Lehman <dlehman@redhat.com> - 0.61.15.71-1
changelog:
  - Remove dependency on libblockdev-nvdimm (vtrefny)
    Resolves: rhbz#1601557
  - Do not try to load NVDIMM plugin on non-x86_64 architectures (vtrefny)
    Related: rhbz#1601557
  - Add version to the LUKS format (vtrefny)
    Resolves: rhbz#1607830


author: David Lehman <dlehman@redhat.com> - 0.61.15.70-1
changelog:
  - Deactivate incomplete VGs along with everything else. (dlehman)
    Resolves: rhbz#1554224
  - Work around udev timing issues. (dlehman)
    Resolves: rhbz#1592253
    Resolves: rhbz#1592191
  - nvdimm: don't crash on non-block devices (rvykydal)
    Related: rhbz#1280500
  - Add NVDIMM detection to "addUdevDiskDevice" (vtrefny)
    Related: rhbz#1558942
  - Add 'NVDIMMNamespaceDevice' device representing NVDIMM namespaces (vtrefny)
    Related: rhbz#1558942
  - Add a function for identifying NVDIMM namespaces (vtrefny)
    Related: rhbz#1558942
  - Add a singleton for NVDIMM namespaces management (vtrefny)
    Resolves: rhbz#1558942
  - Backport DependencyGuard from master (vtrefny)
    Related: rhbz#1558942
  - Ignore nvdimm devices unless configured in kickstart (rvykydal)
    Related: rhbz#1280500
  - Do not ignore nvdimm (pmemX) devices (rvykydal)
    Related: rhbz#1280500


author: David Lehman <dlehman@redhat.com> - 0.61.15.68-1
changelog:
  - Catch lvm metadata lookup failure in md post create. (dlehman)
    Related: rhbz#1223564
    Resolves: rhbz#1543579


author: David Lehman <dlehman@redhat.com> - 0.61.15.67-1
changelog:
  - fcoe: remove /etc/fcoe dir if it exists before copying configuration
    (rvykydal)
    Resolves: rhbz#1482512
  - Find and remove stale LVM metadata immediately after creating md array.
    (dlehman)
    Resolves: rhbz#1223564
  - Add ability to specify vg by uuid for vgremove. (dlehman)
    Related: rhbz#1223564


author: David Lehman <dlehman@redhat.com> - 0.61.15.66-1
changelog:
  - mkfs.ext4 no longer hangs on confirmation (japokorn)
    Resolves: rhbz#1461459
  - Stop enforcing obsolete limits on partition count. (dlehman)
    Resolves: rhbz#1460668
  - Do not try to use protected disks for autopart (vtrefny)
    Resolves: rhbz#1456409


author: David Lehman <dlehman@redhat.com> - 0.61.15.65-1
changelog:
  - Autoset metadata size on percent-based thin pools (vpodzime)
    Resolves: rhbz#1463198
  - Do not try to autoset MD size on a thin pool with no size (vpodzime)
    Related: rhbz#1463198


author: David Lehman <dlehman@redhat.com> - 0.61.15.64-1
changelog:
  - Make sure an LV is deactivated before removal (vpodzime)
    Resolves: rhbz#1456821
  - Make sure the device is setup before formatting it (bcl)
    Resolves: rhbz#1368986
  - Round the recommended thpool metadata size to extents (vpodzime)
    Resolves: rhbz#1456528


author: David Lehman <dlehman@redhat.com> - 0.61.15.63-1
changelog:
  - Use the uuid module instead of the uuidgen tool (vpodzime)
    Related: rhbz#1413942
  - Respect thin pool's min size when setting its req_size (vpodzime)
    Resolves: rhbz#1449963
  - Add RAID chunk size to the generated kickstart file (vtrefny)
    Resolves: rhbz#1447343


author: David Lehman <dlehman@redhat.com> - 0.61.15.62-1
changelog:
  - Don't pass unused mountpoint dict to preCommitFixup. (dlehman)
    Related: rhbz#1184945
  - Use the default md metadata version for everything except /boot/efi.
    (dlehman)
    Resolves: rhbz#1184945
  - Fix resolve_devspec to fully support raid devices (vponcova)
    Resolves: rhbz#1445723


author: David Lehman <dlehman@redhat.com> - 0.61.15.60-1
changelog:
  - Add a method to regenerate XFS' uuid (vpodzime)
    Related: rhbz#1413942
  - Properly unset mountpoint of a snapshot's format (vpodzime)
    Related: rhbz#1413942
  - Update the snapshot's format's exists flag on creation (vpodzime)
    Related: rhbz#1413942
  - Do not require origin to exist when creating snapshot (vpodzime)
    Resolves: rhbz#1413942
  - Make padding smaller for existing thin pools (vpodzime)
    Resolves: rhbz#1432012
  - Use all ancestors when adding RAID disks to exclusiveDisks (vtrefny)
    Resolves: rhbz#1327463
  - Fix detection of linear MD RAID (vtrefny)
    Resolves: rhbz#1372414
  - Allow custom chunk size specification for MDRaidArrayDevice (vtrefny)
    Resolves: rhbz#1405141
  - Remove the useless method requiredDiskLabelType (vponcova)
    Related: rhbz#1405141
  - FBA DASD should use the msdos disk label type (vponcova)
    Resolves: rhbz#1214407
  - Eliminate mountpoint symlinks when looking for mounted device (vtrefny)
    Resolves: rhbz#1322439


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.15.59-1
changelog:
  - Properly calculate thin pool's vgSpaceUsed (vpodzime)
    Related: rhbz#1374499
  - Remove cache and metadata space from pool for an LVRequest (vpodzime)
    Resolves: rhbz#1374499


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.15.57-1
changelog:
  - Relax the blivet device name requirements. (dshea)
    Resolves: rhbz#1259491
  - Do not include both size and percent in kickstart logvol cmd. (dlehman)
    Resolves: rhbz#1269124
  - Ignore NVDIMMs at OS installation time. (dlehman)
    Resolves: rhbz#1334448


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.15.55-1
changelog:
  - Fix lookup of md partition's disk. (dlehman)
    Resolves: rhbz#1362161
  - fcoe: don't eat newlines in /etc/fcoe/NIC-cfg target system config (rvykydal)
    Resolves: rhbz#1350411


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.15.54-1
changelog:
  - Check a device is a DASD before doing DASD-specific checks. (sbueno+anaconda)
    Resolves: rhbz#1353667
  - Ensure biosboot shows up in kickstart (rmarshall)
    Resolves: rhbz#1242666


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.15.53-1
changelog:
  - Suggest container names based on current hostname in installer (rvykydal)
    Related: rhbz#1290858
    Resolves: rhbz#1359631


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.15.52-1
changelog:
  - Add a method to determine if a udev device is a disk. (vtrefny)
    Related: rhbz#1200833
  - Fix udev.resolve_glob to match device path too (vtrefny)
    Related: rhbz#1200833


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.51-1
changelog:
  - fcoe: don't use dcb for autoconnecting of bnx2x and bnx2fc (rvykydal)
    Resolves: rhbz#1261703
  - Use minimal alignment as needed when allocating small partitions. (dlehman)
    Resolves: rhbz#1262137
  - Add support for minimal alignment of very small partitions. (dlehman)
    Related: rhbz#1262137
  - Add an error class for alignment errors. (dlehman)
    Related: rhbz#1262137


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.50-1
changelog:
  - Fix unit arg name in Size.roundToNearest call. (dlehman)
    Resolves: rhbz#1346154
    Related: rhbz#1257997


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.49-1
changelog:
  - Ignore errors activating unknown swap partitions (bcl)
    Resolves: rhbz#1330763
  - Round down to nearest MiB value when writing ks parittion info.
    (sbueno+anaconda)
    Resolves: rhbz#1257997


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.48-1
changelog:
  - Make sure the DM path exists before setting status True (bcl)
    Resolves: rhbz#1325707
  - Try harder to identify a partition's disk when necessary. (dlehman)
    Related: rhbz#1266199
    Related: rhbz#1294081
  - Add some fallback methods for finding a partition's disk. (dlehman)
    Related: rhbz#1266199
    Related: rhbz#1294081
  - Add kwarg to udev.resolve_devspec to return canonical device name. (dlehman)
    Related: rhbz#1266199
    Related: rhbz#1294081
  - Don't let unsupported or broken disklabels get in the way. (dlehman)
    Resolves: rhbz#1294081
    Resolves: rhbz#1266199
  - Convert device_get_dm_partition_disk to not be dm-specific. (dlehman)
    Related: rhbz#1266199
    Related: rhbz#1294081
  - Add a tearDown method to StorageTestCase. (dlehman)
    Related: rhbz#1266199
    Related: rhbz#1294081
  - Continue with recursive teardown beyond inactive devices. (dlehman)
    Related: rhbz#1182229
    Resolves: rhbz#1322981
  - Revert "Do not break the chain when an inactive device is torn down
    recursively" (dlehman)
    Related: rhbz#1322981
  - Don't traceback if we fail to examine an md member. (dlehman)
    Resolves: rhbz#1196666
  - Disklabel commit errors can occur for disks, too. (dlehman)
    Resolves: rhbz#1192571


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.47-1
changelog:
  - Remember VG name even if it seems to have no PVs (vpodzime)
    Resolves: rhbz#1245038
  - Do not try to add internal LVs (vpodzime)
    Resolves: rhbz#1271665


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.46-1
changelog:
  - Fix a typo when checking whether we're using an FBA DASD. (sbueno+anaconda)
    Resolves: rhbz#1233438
  - Add xfs to default filesystem types (rmarshall)
    Related: rhbz#1242666
  - Fix blivet constructor fs support check (rmarshall)
    Related: rhbz#1242666
  - Kickstart missing bootloader partitions (rmarshall)
    Resolves: rhbz#1242666


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.45-1
changelog:
  - Use device's mount options when mounting existing systems (vtrefny)
    Related: rhbz#1250011
  - Fix root detection on btrfs in rescue mode (vtrefny)
    Resolves: rhbz#1250011


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.44-1
changelog:
  - Ignore unused memo_dict arguments in __deepcopy__ methods. (clumens)
    Related: rhbz#1267944
  - Do not create a copy of singleton objects (vpodzime)
    Related: rhbz#1267944


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.42-1
changelog:
  - iscsi: allow installing bootloader on offload iscsi disks (qla4xxx)
    (rvykydal)
    Related: rhbz#1325134
  - Fix traceback when writing dasd.conf (sbueno+anaconda)
    Resolves: rhbz#1031589
  - Disable LVM autobackup when doing image installs (wwoods)
    Resolves: rhbz#1269144
  - Add attribute 'flags.lvm_metadata_backup' (wwoods)
    Related: rhbz#1269144
  - devicelibs.lvm: refactor _getConfigArgs()/lvm() (wwoods)
    Related: rhbz#1269144
  - lvm_test: refactoring + minor fix (wwoods)
    Related: rhbz#1269144
  - devicelibs.lvm: fix pvmove(src, dest=DESTPATH) (wwoods)
    Related: rhbz#1269144


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.41-1
changelog:
  - Account for bigger LVM meta data due to alignment on MD RAID (vpodzime)
    Related: rhbz#1284660
  - Calculate the MD RAID superblock size from the right size (vpodzime)
    Related: rhbz#1284660
  - Do not reserve extra space for metadata in a VG with RAID PVs (vpodzime)
    Resolves: rhbz#1284660


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.38-1
changelog:
  - Switch to using rd.iscsi.initiator (bcl)
    Resolves: rhbz#1268315
  - Use _netdev mount option as needed. (dlehman)
    Resolves: rhbz#1290046
  - Fix the changelog message for udev deadlock fix. (bcl)
    Related: rhbz#1272113


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.32-1
changelog:
  - Wait for auto-activation of LVs when lvmetad is running. (dlehman)
    Resolves: rhbz#1261621
  - Add a function to tell us if the lvmetad socket exists (dlehman)
    Related: rhbz#1261621


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.28-1
changelog:
  - Minimize number of times storage.partitions is accessed. (sbueno+anaconda)
    Resolves: rhbz#1155984
  - Get rid of Size.__str__ calls in logging. (sbueno+anaconda)
    Resolves: rhbz#1155984
  - Only access storage.bootDisk once (sbueno+anaconda)
    Resolves: rhbz#1155984
  - Fix isDisk and partitionable properties for fwraid arrays. (dlehman)
    Related: rhbz#1197582
  - Require a non-empty member set for md disks. (dlehman)
    Related: rhbz#1197582
  - Replace property decorator on PartitionDevice.resizable. (dlehman)
    Related: rhbz#1069597
  - Update unit tests related to mediaPresent. (dlehman)
    Related: rhbz#1069597
  - Don't store UUIDs or labels of multipath members. (dlehman)
    Resolves: rhbz#1254232
  - Try to do fsck if resize fails before giving up (vpodzime)
    Resolves: rhbz#1251396


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.26-1
changelog:
  - When handling implicit partitions, first check autopart was requested.
    (clumens)
    Related: rhbz#1164660


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.25-1
changelog:
  - Duplicate VG names are problem even if their disks are ignored (vpodzime)
    Resolves: rhbz#1198367


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.24-1
changelog:
  - Add a method to list disks related by lvm/md/btrfs container membership.
    (dlehman)
    Related: rhbz#1254548
  - Make getDependentDevices work with hidden devices. (dlehman)
    Related: rhbz#1254548


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.20-1
changelog:
  - Update dmdev size when setting up disk images (bcl)
    Resolves: rhbz#1252703
  - Setup LoopDevice's name before updating sysfs path (bcl)
    Resolves: rhbz#1252703
  - Add likely to be raised exceptions to catch block (amulhern)
    Related: rhbz#1252703
  - Fix setupDiskImages when the devices are already in the tree. (dlehman)
    Related: rhbz#1252703


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.17-1
changelog:
  - Fix some logical problems in write_dasd_conf (sbueno+anaconda)
    Resolves: rhbz#1248949
  - Remove unusable free regions from list when setting up growth. (dlehman)
    Resolves: rhbz#1248487


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.16-1
changelog:
  - Fall back on mdadm info if udev info is missing for the array (amulhern)
    Related: rhbz#1246003
  - Call superclass ctor a bit later to get size attrs set up first. (dlehman)
    Resolves: rhbz#1246003
  - updateSize for md containers is a no-op. (dlehman)
    Related: rhbz#1246003
  - Don't pass model to md fwraid constructor. (dlehman)
    Related: rhbz#1246003


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.14-1
changelog:
  - Don't pass createOptions along when creating the btrfs device. (clumens)
    Resolves: rhbz#1248313
  - Pass a sysfs path to MultipathDevice constructor (rvykydal)
    Resolves: rhbz#1245201


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.13-1
changelog:
  - Enforce size range on factory fstypes (dlehman)
    Resolves: rhbz#1178884
  - Fix obsolete format size constraints (dlehman)
    Resolves: rhbz#1178884


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.11-1
changelog:
  - Add error handling around storageInitialize for unusable setups. (dlehman)
    Related: rhbz#1236995
  - Include suggestions in error classes for unusable storage configurations.
    (dlehman)
    Related: rhbz#1236995
  - x-initrd.mount should only be set for /var (bcl)
    Resolves: rhbz#1238603


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.10-1
changelog:
  - Add a function to devicelibs.dasd to detect LDL DASDs. (sbueno+anaconda)
    Resolves: rhbz#1233438
  - Make sure devices are always torn down in findExistingInstallations if
    requested (vpodzime)
    Related: rhbz#1182229
  - Do not break the chain when an inactive device is torn down recursively
    (vpodzime)
    Related: rhbz#1182229
  - Tear down all devices after finding existing installations (vpodzime)
    Resolves: rhbz#1182229


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.9-1
changelog:
  - Improve format handling for lvm snapshots. (dlehman)
    Resolves: rhbz#1234454
  - Don't crash on cleanup with DASDs or iSCSI devices present. (dlehman)
    Resolves: rhbz#1166506
  - Fix handling of UUIDs for existing MD devices. (dlehman)
    Resolves: rhbz#1234333
  - Treat existing md arrays whose members are all disks like disks. (dlehman)
    Resolves: rhbz#1197582
  - Handle formatting immediately after adding devices from format handlers.
    (dlehman)
    Related: rhbz#1192004
  - Be more careful about overwriting device.originalFormat. (dlehman)
    Resolves: rhbz#1192004
  - Store vendor/model information for DiskDevice instances. (dlehman)
    Related: rhbz#1069597
  - Move mediaPresent out of Device and into StorageDevice. (dlehman)
    Related: rhbz#1069597
  - Don't use parted.Device to obtain size info. (dlehman)
    Resolves: rhbz#1069597
  - Align free regions before choosing one. (dlehman)
    Related: rhbz#1181494
  - Align partition sizes earlier in the allocation process. (dlehman)
    Resolves: rhbz#1181494
  - Fix a duplicate key caused by patch merging. (clumens)
    Related: rhbz#1220898
  - Add support for specifying arbitrary mkfs options. (clumens)
    Resolves: rhbz#1220898


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.8-1
changelog:
  - LVMFactory: raise exception when adding LV to full fixed size VG (vtrefny)
    Resolves: rhbz#1170660
  - Do not unhide devices with hidden parents (vtrefny)
    Resolves: rhbz#1158643
  - Add support for creation of cached LVs (vpodzime)
    Related: rhbz#1120421
  - Recognize and process cached logical volumes (vpodzime)
    Related: rhbz#1120421
  - Don't crash when processing cached LVs (vpodzime)
    Related: rhbz#1120421


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.7-1
changelog:
  - Require pyparted with exception handler support (bcl)
    Related: rhbz#1188163
  - Use partially corrupt gpt disklabels. (bcl)
    Resolves: rhbz#1188163


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.6-1
changelog:
  - Fix up some logging methods. (sbueno+anaconda)
    Resolves: rhbz#1155984
  - Make sure to add hyperPAV aliases to dasd.conf (sbueno+anaconda)
    Resolves: rhbz#1031589
  - Fix a traceback with anaconda-cleanup on s390x. (sbueno+anaconda)
    Resolves: rhbz#1173101
  - Increase ext4 maximum size from 16 TiB to 1 EiB (bcl)
    Resolves: rhbz#1231049


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.5-1
changelog:
  - If any zFCP devices are used, always write /etc/zfcp.conf (sbueno+anaconda)
    Resolves: rhbz#1194241


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.4-1
changelog:
  - Un-escape '-'s in names or paths for _all_ lvm lv or vgs (amulhern)
    Related: rhbz#1223855
  - Include LUKSDevice information in kickstart data (amulhern)
    Resolves: rhbz#1139222
  - If the parent volume has a label, use it in subvol's kickstart (amulhern)
    Resolves: rhbz#1072060


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.3-1
changelog:
  - Improve wording of the error message on autopart fail (vpodzime)
    Related: rhbz#1202877
  - Fallback implicit partition size must be big enough for BTRFS (vpodzime)
    Related: rhbz#1202877
    Related: rhbz#1171116
  - Make implicit partitions smaller if real requests don't fit anywhere
    (vpodzime)
    Resolves: rhbz#1171116
    Related: rhbz#1202877
  - Make sure autopart requests fit in somewhere (vpodzime)
    Resolves: rhbz#978266
    Related: rhbz#1202877
  - Work with free region sizes instead of parted.Geometry objects (vpodzime)
    Related: rhbz#1202877
    Related: rhbz#978266
  - Check that we have big enough free space for the partition request (vpodzime)
    Related: rhbz#1202877
    Related: rhbz#978266


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.2-1
changelog:
  - If allowing degraded array, attempt to start it (amulhern)
    Resolves: rhbz#1090009
    Related: rhbz#1202877
  - Add a method that looks at DEVNAME (amulhern)
    Related: rhbz#1090009
    Related: rhbz#1202877
  - Add mdrun method to just start, not assemble, an array. (amulhern)
    Related: rhbz#1090009
    Related: rhbz#1202877
  - Change allow_degraded_mdraid flag to allow_imperfect_devices (amulhern)
    Related: rhbz#1090009
    Related: rhbz#1202877
  - Check if device has enough members when setting RAID level (amulhern)
    Related: rhbz#1019685
    Related: rhbz#1202877
  - Add BTRFSValueError error and use in btrfs related code (amulhern)
    Related: rhbz#1019685
    Related: rhbz#1202877
  - Use a safer method to get a dm partition's disk name. (dlehman)
    Resolves: rhbz#1190886
    Related: rhbz#1181336
  - Don't raise an exception for failure to scan an ignored disk. (dlehman)
    Related: rhbz#1123450
  - iscsi: mount partitions in initramfs for root on iscsi (rvykydal)
    Related: rhbz#740106
    Related: rhbz#1202877
  - iscsi: improve logging of failed logins (rvykydal)
    Related: rhbz#1114820
    Related: rhbz#1202877
  - Introduce a new doReqPartition method that is similar to doAutoPartition.
    (clumens)
    Related: rhbz#1164660
  - Fix "anaconda hangs while trying to discover iscsi..." (jkonecny)
    Resolves: rhbz#1166652


author: Brian C. Lane <bcl@redhat.com> - 0.61.15.1-1
changelog:
  - Add .0 to version -- 0.61.15.0 (bcl)
    Related: rhbz#1202877
  - Ignore Merge pull commits and turn down logging level (bcl)
    Related: rhbz#1202877
  - get_loop_name shoud return an empty name if it isn't found (#980510) (bcl)
    Related: rhbz#1202877
  - Multiple loops shouldn't be fatal (#980510) (bcl)
    Related: rhbz#1202877
  - Disable MacEFI platform type and hfs+ ESP (#1119305) (bcl)
    Related: rhbz#1202877
  - Add a release make target (bcl)
    Related: rhbz#1202877
  - Update makebumpver to include flags on first request (bcl)
    Related: rhbz#1202877
  - Fix a couple of easy pylint errors. (dlehman)
    Related: rhbz#1202877
  - Change required pyparted version to one that is in RHEL-7. (dlehman)
    Related: rhbz#1202877
  - Remove python-six dependency. (dlehman)
    Related: rhbz#1202877
  - Clean out the mock chroot before attempting to run the rest of the test. (clumens)
    Related: rhbz#1202877
  - Put all mock results into the top-level source dir. (clumens)
    Related: rhbz#1202877
  - Add scratch, scratch-bumpver and rc-release targets. (bcl)
    Related: rhbz#1202877
  - Add --newrelease to makebumpver (bcl)
    Related: rhbz#1202877
  - Add po-empty make target (bcl)
    Related: rhbz#1202877
  - Switch translations to use Zanata (bcl)
    Related: rhbz#1202877
  - Split up devices.py. (dlehman)
    Related: rhbz#1202877
  - Split string of symlinks into array of strings (#1136214) (amulhern)
    Related: rhbz#1202877
  - Keep lvm and md metadata separate from udev info. (dlehman)
    Related: rhbz#1202877
  - Replace our pyudev with the package python-pyudev. (dlehman)
    Related: rhbz#1202877


author: David Lehman <dlehman@redhat.com> - 0.61.15-1
changelog:
  - Allow passing KiB values to vgcreate -s option (tjeyasin)
  - Add a script to rebase and merge pull requests (dshea)
  - Allow user-specified values for data alignment of new lvm pvs. (#1178705)
    (dlehman)
  - Let LVM determine alignment for PV data areas. (#962961) (dlehman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.14-1
changelog:
  - Mountpoint detection for removable devices (vtrefny)
  - Use format.mountpoint for BTRFS listSubVolumes (vtrefny)
  - Allow handling device format for already handled BTRFS (vtrefny)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.13-1
changelog:
  - Fix pyparted version in spec file. (sbueno+anaconda)
  - Revert "Prune actions before cancelling them" (sbueno+anaconda)
  - Revert "Update partitions' numbers and names when adding new partition
    (#1166598)" (sbueno+anaconda)
  - Revert "Return device's children sorted by name" (sbueno+anaconda)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.61.12-1
changelog:
  - Prune actions before cancelling them (vpodzime)
  - Try to get FS info first before doing an FS check (vpodzime)
  - Reverting partition's size shouldn't require it to be aligned (#1165714)
    (vpodzime)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.11-1
changelog:
  - Update partitions' numbers and names when adding new partition (#1166598)
    (vpodzime)
  - Return device's children sorted by name (vpodzime)
  - Run dosfsck in non-interactive mode (#1167959) (bcl)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.10-1
changelog:
  - Round filesystem target size to whole resize tool units. (#1163410) (dlehman)
  - New method to round a Size to a whole number of a specified unit. (dlehman)
  - Fix units for fs min size padding. (dlehman)
  - Disable resize operations on filesystems whose current size is unknown.
    (dlehman)
  - Run fsck before obtaining minimum filesystem size. (#1162215) (dlehman)
  - Do not translate empty strings, gettext translates them into system
    information (vtrefny)
  - Add more arguments to mpathconf (#1154347) (dshea)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.9-1
changelog:
  - Device status can never be True for non-existent devices. (#1156058)
    (dlehman)
  - Use super to get much-needed MRO magic in constructor. (#1158968) (dlehman)
  - Fix int * Size operation and add tests (#1158792) (bcl)
  - getArch should return ppc64 or ppc64le (#1159271) (bcl)
  - Pack data for the wait_for_entropy callback (vpodzime)
  - Allow the wait_for_entropy callback enforce continue (vpodzime)
  - Revert "Disable resize of ntfs during OS installation. (#1120964)" (dlehman)
  - Require resize target sizes to yield aligned partitions. (#1120964) (dlehman)
  - Split out code to determine max unaligned partition size to a property.
    (dlehman)
  - Allow generating aligned geometry for arbitrary target size. (dlehman)
  - Align end sector in the appropriate direction for resize. (#1120964)
    (dlehman)
  - Specify ntfs resize target in bytes. (#1120964) (dlehman)
  - Check new target size against min size and max size. (dlehman)
  - Use Decimal for math in Size.convertTo. (#1120964) (dlehman)
  - Change signature of DiskLabel.addPartition to be more useful. (dlehman)
  - Add a contextmanager to create and remove sparse tempfiles. (dlehman)
  - Add a DiskFile class for testing partitioning code as a non-root user.
    (dlehman)
  - Add ability to set a default fstype for the boot partition (#1112697) (bcl)
  - Pass a list of string items to log_method_return. (sbueno+anaconda)
  - Add testing for MDRaidArrayDevice.mdadmFormatUUID (#1156202) (amulhern)
  - Give mdadm format uuids to the outside world (#1156202) (amulhern)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.8-1
changelog:
  - Strip lvm WARNING: lines from output (#1157864) (bcl)
  - Wait for udev to settle before collecting UUID for new filesystems. (dlehman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.7-1
changelog:
  - Don't try to get no profile's name (#1155014) (vpodzime)
  - Disable resize of ntfs during OS installation. (#1120964) (dlehman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.6-1
changelog:
  - Let udev settle between writing partition flags and formatting. (#1109244)
    (dlehman)
  - Set _partedDevice attribute before calling device constructor (#1150147)
    (amulhern)
  - Change variable keyword (#1154050) (amulhern)
  - Set sysfsPath attribute before calling Device constructor (#1150147)
    (amulhern)
  - Take care when checking relationship of parent and child UUIDs (#1150147)
    (amulhern)
  - Specify file type in transifex config file. (sbueno+anaconda)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.5-1
changelog:
  - Branch transifex for the f21-branch (#1151750) (vpodzime)
  - Remove unused import introduced by porting patches (vpodzime)
  - Allow specifying thin pool profiles (vpodzime)
  - Remove tests for the sanityCheck (vpodzime)
  - Move _verifyLUKSDevicesHaveKey and its exception to anaconda (vpodzime)
  - Remove sanityCheck functions from blivet sources (vpodzime)
  - Allow specifying minimum entropy when creating LUKS (vpodzime)
  - Allow user code provide callbacks for various actions/events (vpodzime)
  - Allow user code creating free space snapshot (vpodzime)
  - Update tests to bring into line w/ previous commit (#1150147) (amulhern)
  - Abstract ContainerDevice member format check into a method (#1150147)
    (amulhern)
  - Register DeviceFormat class (#1150147) (amulhern)
  - Don't append btrfs mount options to None (#1150872) (dshea)
  - Convert int to str before passing it to run_program (#1151129) (amulhern)
  - Avoid unneccesarily tripping raid-level member count checks. (dlehman)
  - Allow toggling encryption of raid container members. (#1148373) (dlehman)
  - Organize installer block device name blacklist. (#1148923) (dlehman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.4-1
changelog:
  - Canonicalize MD_UUID* values in udev.py (#1147087) (amulhern)
  - Add a test for activation. (amulhern)
  - Add a test for mddetail on containers. (amulhern)
  - Still attempt to destroy even if remove failed. (amulhern)
  - Use long messages for unittest errors. (amulhern)
  - Fix mdnominate error message. (amulhern)
  - Break once metadata value is found. (amulhern)
  - Split mdadd into separate functions. (amulhern)
  - Refactor mdraid tests. (amulhern)
  - Add a method to extract information about an mdraid array (amulhern)
  - Extend mdadm() to capture output (amulhern)
  - Be more robust in the face of possible changes to mdadm's UUIDs. (amulhern)
  - Factor canonicalize_UUID() into separate method. (amulhern)
  - Add a docstring to mdraid.mdexamine (amulhern)
  - Omit pylint false positive (amulhern)
  - Pylint inspired cleanup (#1070115) (amulhern)
  - Raise an exception when we find orphan partitions. (dlehman)
  - Fall back to parted to detect dasd disklabels. (dlehman)
  - Remove a problematic remnant of singlePV. (dlehman)
  - Remove all traces of singlePV. (sbueno+anaconda)
  - Change the default /boot part on s390x to not be lvm. (sbueno+anaconda)
  - Condense and comment some devicelibs.dasd methods (#1070115) (amulhern)
  - Add a test file for DASD handling (#1070115) (amulhern)
  - Add two functions to enable manual addition of ECKD DASDs. (sbueno+anaconda)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.3-1
changelog:
  - Don't mix target and discovery credentials (#1037564) (mkolman)
  - Filter out free regions too small for alignment of partitions. (dlehman)
  - Align free regions used for partition growing calculations. (dlehman)
  - Try to align end sector up when aligning new partitions. (dlehman)
  - Remove obsolete conversion of size to float. (dlehman)
  - Honor size specified for explicit extended partition requests. (dlehman)
  - Honor zerombr regardless of clearpart setting. (dlehman)
  - Fix treatment of percent as lvm lv size spec. (#1146156) (dlehman)
  - iscsi: fix root argument being overriden by local variable (#1144463)
    (rvykydal)
  - iscsi: add iscsi singleton back (#1144463) (rvykydal)
  - Only cancel actions on disks related to the one we are hiding. (dlehman)
  - Cancel actions before hiding descendent devices. (dlehman)
  - Improve handling of device removals/additions from the devicetree. (dlehman)
  - The first format destroy action should obsolete any others. (dlehman)
  - Do not allow modification or removal of protected devices. (dlehman)
  - Fix pylint errors from recent btrfs commits. (dlehman)
  - Propagate mount options for btrfs members to all volumes/subvolumes.
    (dlehman)
  - Properly identify dm devices even when udev info is incomplete. (dlehman)
  - Do not mount btrfs to list subvolumes outside installer_mode. (dlehman)
  - Reset default subvolume prior to removing the default subvolume. (dlehman)
  - Increase max size for btrfs to 16 EiB. (#1114435) (dlehman)
  - Improve adjustment for removal of a subvol in BTRFSFactory. (dlehman)
  - Set dummy mountpoint in ksdata for lvm thin pools. (dlehman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.61.1-1
changelog:
  - Make prefering leaves the default in getDeviceByPath (#1122081) (amulhern)
  - Make _filterDevices() return a generator consistently (#1122081) (amulhern)
  - Don't pass md array UUID as member format UUID. (#1135670) (dlehman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 0.62-1
changelog:
  - _maxLabelChars is no longer used by anything (bcl)
  - tests: Add tests for HFSPlus labels (#821201) (bcl)
  - Write a fs label for HFS+ ESP (#821201) (bcl)
  - Minor fix of a docstring. (rvykydal)
  - Get rid of partedFlags field. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.61-1
changelog:
  - Fix conf.py version bumping (bcl)
  - Add some tests for Chunk and Request class hierarchy. (dlehman)
  - Honor the skip list when allocating leftover sectors. (dlehman)
  - A Chunk is done growing when its pool is empty. (dlehman)
  - Don't use integer division to calculate a fraction. (dlehman)
  - Bump version in sphinx config from scripts/makebumpver. (dlehman)
  - Remove spec= from Size usage in intro.rst. (dlehman)
  - Attempt to reset the uuid of the mdraid member device (#1070095) (amulhern)
  - Add new method udev.device_get_md_device_uuid() method (#1070095) (amulhern)
  - Canonicalize mdadm generated UUIDS (#1070095) (amulhern)
  - Add a udev.device_get_md_metadata() method to udev and use it. (amulhern)
  - Change use of METADATA to MD_METADATA. (amulhern)
  - Check for md_level of None (amulhern)
  - Do not convert the result of udev.device_get_md_devices() to int. (amulhern)
  - Add documentation to udev.device_get_md_*() methods. (amulhern)
  - Document udev.device_get_uuid() method. (amulhern)
  - Add a few small tests for mdexamine (amulhern)
  - Add test for raid level descriptor None. (amulhern)
  - Use context manager with assertRaises*() tests. (amulhern)
  - Change uuid parameter to array_uuid (amulhern)
  - Remove udev_ prefix from udev methods. (amulhern)
  - Remove all references to DeviceFormat.majorminor (amulhern)
  - Use add_metaclass instead of with_metaclass. (amulhern)
  - Disable redefined-builtin warning. (amulhern)
  - Use range instead of xrange in generateBackupPassphrase() (amulhern)
  - Add a simple test of generateBackupPassphrase() result format (amulhern)
  - Python3 compatibility (rkuska)
  - Replace python-setuptools-devel BR with python-setuptools (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.60-1
changelog:
  - Do not use udev info to get the name of the device. (amulhern)
  - Remove unnecessary fanciness about importing devices. (amulhern)
  - Disable some pylint warnings that arise due to anaconda versions. (amulhern)
  - Allow RAID1 on EFI (#788313) (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.58-1
changelog:
  - Only import ROOT_PATH if needed (bcl)
  - Add early keyword to setUpBootLoader (#1086811) (bcl)
  - Only log a warning about labeling if something is wrong (#1075136) (amulhern)
  - When adding an md array, allow adding incomplete arrays (#1090009) (amulhern)
  - Add a flag to control whether a degraded md raid array is used (#1090009)
    (amulhern)
  - Remove preferLeaves parameter from getDeviceByPath() (amulhern)
  - Factor out commonalities among getDevice[s|]By* methods. (amulhern)
  - Omit special check for md devices in addUdevDevice(). (amulhern)
  - Remove unused 'slaves' variable. (amulhern)
  - Move down or remove assignment to device in add* methods. (amulhern)
  - Move DevicelibsTestCase up to the top level of the testing directory.
    (amulhern)
  - Accept None for btrfs raid levels (#1109195) (amulhern)
  - Add a test for a btrfs error associated with small devices (#1109195)
    (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.57-1
changelog:
  - Make DevicelibsTestCase devices configurable. (amulhern)
  - Use correct parameters in __init__() in subclasses of unittest.TestCase.
    (amulhern)
  - Add num_blocks parameter to makeLoopDev(). (amulhern)
  - Move skipUnless decorator to the top level class of skipped classes.
    (amulhern)
  - Explicitly accept a string as well as a RAIDLevel object. (amulhern)
  - Update BTRFS initializer comments for level type. (amulhern)
  - Remove some extra imports. (amulhern)
  - Add method to set the default disklabel (#1078537) (bcl)
  - Do not try to activate dmraid sets if the dmraid usage flag is false
    (mkolman)
  - Use the value of the Anaconda dmraid flag to set the Blivet dmraid flag
    (mkolman)
  - Use the value of the Anaconda ibft flag to set the Blivet ibft flag (mkolman)
  - Ignore _build directory in doc directory. (amulhern)
  - Change intersphinx mapping to avoid linkcheck redirect errors. (amulhern)
  - Remove doctest target from Makefile. (amulhern)
  - Allow the table of contents to go one level deeper. (amulhern)
  - Automate generation of the .rst files which just set up the modules.
    (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.56-1
changelog:
  - Skip device name validation for some device types. (dlehman)
  - Add a property indicating whether a device is directly accessible. (dlehman)
  - Add support for read-only btrfs snapshots. (dlehman)
  - Add tests for snapshots. (dlehman)
  - Special treatment for getting parted device for old-style lvm snapshots.
    (dlehman)
  - Some devices have immutable formatting. (dlehman)
  - Detect existing btrfs snapshots. (dlehman)
  - Drop special accounting for snapshot space usage in VG. (dlehman)
  - Use LVMSnapshotDevice when populating the devicetree. (dlehman)
  - Add Device classes for snapshots. (dlehman)
  - Add ignore_skip keyword arg to lvactivate. (dlehman)
  - Add optional kwarg to force removal of a logical volume. (dlehman)
  - Add backend functions for creating and managing snapshots. (dlehman)
  - Add docstrings for BTRFSVolumeDevice and BTRFSSubVolumeDevice. (dlehman)
  - Remove duplicate portion of lvm config string. (dlehman)
  - Reset the devicetree before tearing everything down in _cleanUp. (dlehman)
  - Make sure disk filters are applied even if populate fails. (dlehman)
  - Sync the spec file with downstream (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.55-1
changelog:
  - IPSeriesPPC now supports GPT in Open Firmware (hamzy)
  - Fix device name validation for devices that can contain / (#1103751) (dshea)
  - Add a getRaidLevel() convenience method to raid.py (amulhern)
  - Make a StorageDevice.raw_device property and use it where appropriate
    (amulhern)
  - Simplify a small chunk of Blivet.updateKSData() (amulhern)
  - Move the code for getting a space requirement from devicefactory to raid.
    (amulhern)
  - Make all devicefactory classes uses RAID objects instead of strings.
    (amulhern)
  - Remove devicefactory.get_raid_level from blivet (amulhern)
  - Put get_supported_raid_levels in devicefactory.py (amulhern)
  - Make BTRFS devices use RAID objects instead of strings for levels (amulhern)
  - Add lists of supported RAID levels for btrfs and lvm (amulhern)
  - Add "linear" to mdraid's list of supported raid levels. (amulhern)
  - Remove getRaidLevel() from mdraid file and make RAID_levels public (amulhern)
  - Check for required methods in MDRaidLevels.isRaidLevel. (amulhern)
  - Use has_redundancy property to decide how to add a member to an array.
    (amulhern)
  - Update the mdraid.mdadd comments (amulhern)
  - Use has_redundancy raid property when checking whether a device is removable
    (amulhern)
  - Make createBitmap() a property and update tests appropriately. (amulhern)
  - Add a Dup class to the various descendants of RAIDLevel. (amulhern)
  - Add an is_uniform property to the RAID levels. (amulhern)
  - Add a has_redundancy method that returns True if there is actual redundancy
    (amulhern)
  - Add Linear and Single to the RAID classes. (amulhern)
  - Move Container class to raid package and tidy it up (amulhern)
  - Allow the RAID object itself to be a valid RAID descriptor for lookup.
    (amulhern)
  - Adjust RaidLevel hierarchy so that all raid level objects extend RAIDLevel
    (amulhern)
  - No longer use _standard_levels as the default set of RAID levels. (amulhern)
  - Extract selection of members in complete() into a separate method. (amulhern)
  - Remove DMRaidArrayDevice.members property. (amulhern)
  - Comment mdraid.mdcreate() and update tests appropriately. (amulhern)
  - Import name 'lvm' instead of names from lvm package. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.54-1
changelog:
  - Add tests for setting device's parent list directly (vpodzime)
  - Do not alter the ParentList being iterated over (#1083581) (vpodzime)
  - Do not limit ThinLV's size to VG's free space (vpodzime)
  - Take extra RAID metadata into account when growing LV (#1093144) (vpodzime)
  - Move apply_chunk_growth outside of a for-cycle (vpodzime)
  - Multiple arguments for string formatting need to be in parentheses (#1100263)
    (mkolman)
  - Make print statements Python 3 compatible (mkolman)
  - Validate device names (dshea)
  - Use a setter for Device.name as foretold by the prophecy of TODO (dshea)


author: Brian C. Lane <bcl@redhat.com> - 0.53-1
changelog:
  - Remove extra quotes from the xfs_db arguments. (dshea)
  - Factor duplicate code in __deepcopy__ methods into one method (#1095244)
    (amulhern)
  - Rearrange code related to handleUdevDeviceFormat() (#1095329) (amulhern)
  - Make dumpState catch and log all AttributeErrors (#1095329) (amulhern)
  - Add sectorSize property to catch and handle missing partedDevice (#1095329)
    (amulhern)
  - Get rid of remaining uses of spec keyword for Size() in examples directory.
    (amulhern)
  - Generalize false positive regular expression for multiple pylint versions
    (amulhern)
  - Do not run some tests unless running on Jenkins. (amulhern)
  - Miscellaneous pylint fixes. (amulhern)
  - Globally disable pointless string statement warning (amulhern)
  - Disable unused argument warning for 'args' in TmpFSDevice constructor
    (amulhern)
  - Omit 'args' parameter from formats constructors (amulhern)
  - Disabled unused argument warning for kwargs in formats.destroy() (amulhern)
  - Omit *args from parameters for format.create() and formats.destroy()
    (amulhern)
  - Omit *args from parameters in formats.setup() (amulhern)
  - Make formats.teardown() not take any extra parameters. (amulhern)
  - Make formats.mount use explicit keywords instead of kwargs. (amulhern)
  - Remove non-self params from FS.doResize method (amulhern)
  - Make doFormat use regular style keyword parameters (amulhern)
  - Do not use *args, **kwargs idiom in scheduleCreateFormat. (amulhern)
  - Do not use *args, **kwargs idiom in various schedule* auxiliary test methods.
    (amulhern)
  - Remove upgrading param from turnOnSwap() (amulhern)
  - Disable unused-argument warning (amulhern)
  - Disable pylint unused-argument warning. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.52-1
changelog:
  - Split ROOT_PATH usage into getTargetPhysicalRoot()/getSysroot() (walters)
  - Update and fix copyright info for docs. (dlehman)
  - Add some tests for extended partition management. (dlehman)
  - Add some tests that verify the results of DeviceTree.populate. (dlehman)
  - Add a base class for tests backed by disk image storage. (dlehman)
  - Adapt examples to examples/common.py function dispersement. (dlehman)
  - Change devices.SparseFileDevice._create to use util.create_sparse_file.
    (dlehman)
  - Move set_up_logging and create_sparse_file into blivet.util for reuse.
    (dlehman)
  - Make examples.common.tear_down_disk_images a DeviceTree method. (dlehman)
  - Fix handling of devices activated as a side-effect of actions. (dlehman)
  - Check for problematic active devices before processing any actions. (dlehman)
  - Split some large blocks out of DeviceTree.processActions. (dlehman)
  - Explicitly requested extended partitions already have an action. (dlehman)
  - Fix handling of extended partitions across various modes of operation.
    (dlehman)
  - Handle the case of md arrays getting activated from outside blivet. (dlehman)
  - Make an extra effort to remove dm partition nodes that want to stay.
    (dlehman)
  - Fix handling of clearing a partitioned disk and leaving it cleared. (dlehman)
  - Don't check for disklabels on partitions. (dlehman)
  - Update targetSize to reflect actual size after a device is created. (dlehman)
  - Remove redundant msecs from logging timestamp. (dlehman)
  - Make signature of Size.__new__ match signature of Decimal.__new__ (amulhern)
  - Change Size so that it takes a single value parameter. (amulhern)
  - Change all 'format' keyword args to 'fmt' in Device constructors (amulhern)
  - Change format keyword argument to fmt in scheduleCreateFormat (amulhern)
  - Change keyword parameters in devicetree.findActions (amulhern)
  - Change ActionCreateFormat constructor keyword argument to 'fmt' (amulhern)
  - Remove unused parameter 'ignoreErrors' from umountFilesystems() (amulhern)
  - Remove parameter 'raiseErrors' from mountFilesystems() methods. (amulhern)
  - Disable unused argument warning for 'major' and 'minor' (amulhern)
  - Set dummy functions as values rather than via function definition syntax.
    (amulhern)
  - Pass size value to superconstructor for LVMVolumeGroupDevice. (amulhern)
  - Sort the pylint-false-positives file (amulhern)
  - Do not disable unused argument warning. (amulhern)
  - Omit pylint warning about disabled warnings or errors from pylint log.
    (amulhern)
  - Put the pyblock warning in pylint-false-positives (amulhern)
  - Remove obsolete documentation for parameter 'label'. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.51-1
changelog:
  - Adjust the available size on each disk using chunk size. (amulhern)
  - Removed some now unused methods from devices (#1085474) (amulhern)
  - Rename size() method to get_size() method. (amulhern)
  - Remove unused get_size method (#1085474) (amulhern)
  - Use raid.size method to get size of device (#1085474) (amulhern)
  - Add a size() method to the raid classes (#1085474) (amulhern)
  - Move line that might throw an MDRaid exception inside try block (#1085474)
    (amulhern)
  - Check whether type is mdbiosraidarray before checking smallest member
    (#1085474) (amulhern)
  - Log if there was a failure to calculate the size of the MDRaidArrayDevice
    (#1085474) (amulhern)
  - Rename get_raw_array_size to get_net_array_size (#1085474) (amulhern)
  - Rename _get_size to _trim, which describes its function better (#1085474)
    (amulhern)
  - Improve comments on a few methods (#1085474) (amulhern)
  - Make RAIDLevels iterable (#1085474) (amulhern)
  - Update makebumpver for python-bugzilla 1.0.0 (bcl)
  - Disable unused argument warning for 'key_file' in devicelibs.crypto methods
    (amulhern)
  - Disable unused argument warning for 'del_passphrase' in luks_remove_key
    (amulhern)
  - Disable unused argument warning for 'data' in doAutoPartition (amulhern)
  - Disable unused argument warning for 'info' in handleUdevLuksFormat (amulhern)
  - Disable unused argument warning for 'disks' in get_pv_space. (amulhern)
  - Remove pointless parameters from unittest methods. (amulhern)
  - Disable a no member warning for EddTestFS initializer. (amulhern)
  - Get rid of unused argument 'args' in MakeBumpVer constructors (amulhern)
  - Changes to _parseOneLine() and its single invocation. (amulhern)
  - Remove obsolete comment (amulhern)
  - Rename to avoid redefining parameter built-ins (amulhern)
  - Change name to avoid redefining built-in (amulhern)
  - Remove unused parameter in makeupdates. (amulhern)
  - Removed unused argument 'options' from testMount (amulhern)
  - Make signature of _setSize match that of the method it overrrides. (amulhern)
  - Actually use argv parameter (amulhern)
  - Pass fname as first argument to shutil.copy2 (amulhern)
  - Remove minimumSector method and _minimumSector attribute (amulhern)
  - Disable not-callable pylint warning. (amulhern)
  - Set child_factory_fstype to None in DeviceFactory (amulhern)
  - Suppress unpacking-non-sequence pylint warning (amulhern)
  - Prefix name with defining package (amulhern)
  - Update Platform instance from flags instead of replacing it. (#1090646)
    (dlehman)
  - Rename to avoid redefining built-ins where the redefinition is method local.
    (amulhern)
  - Set device.format in else block of try/except/else. (amulhern)
  - Do not run pylint on sphinx generated conf.py (amulhern)
  - Get rid of a redefined builtin while simplifying method. (amulhern)
  - Compress loop into generator list comprehension (amulhern)
  - Rewrite resize() method to depend on _resizable. (amulhern)
  - Remove definition of LVMThinLogicalVolumeDevice._resizable (amulhern)
  - Add an attribute docstring for _resizable. (amulhern)
  - Correct comment on resizable property (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.50-1
changelog:
  - Don't apply action until after all checks have passed. (dlehman)
  - Apply action for extended partition creation. (dlehman)
  - Fix an issue introduced in commit a210eb5c. (dlehman)
  - Move changes from action ctors into apply methods. (dlehman)
  - Tell lvm to prefer /dev/mapper/ and /dev/md/ to dm-X and mdX nodes. (dlehman)
  - Use the right md UUID when trying to look one up from addUdevDevice.
    (dlehman)
  - Pass UUID of existing md array to superclass constructor. (dlehman)
  - Fix accounting related to addition of md member devices. (dlehman)
  - Add some more tests for the Size.humanReadable method (vpodzime)
  - If size is an integer value, show it as an integer value (vpodzime)
  - Make sure that using just k/m/g/... results in KiB/MiB/GiB/... (vpodzime)
  - Make humanReadable size use binary prefixes and nicer units (vpodzime)
  - Round sizes in humanReadable instead of flooring them (vpodzime)
  - Do not assign result of evaluating EddTestFS() to a variable (amulhern)
  - Rename bits() to numBits() (amulhern)
  - Rename to avoid conflict with name in outer scope. (amulhern)
  - Put module level code in a method (amulhern)
  - Do not use strip() incorrectly (amulhern)
  - Disable E1101 (no-member) error (amulhern)
  - Use isResize in isShrink and isGrow. (amulhern)
  - Suppress W0612 (unused-variable) false positives (amulhern)
  - Suppress W0621 warnings (amulhern)
  - Add a stub function for get_bootloader (amulhern)
  - Suppress W0602 false positives (amulhern)
  - Remove BootLoaderError definitions (amulhern)
  - Disable E1003 warning. (amulhern)
  - Do not cache the DeviceFormat object (amulhern)
  - Suppress W0201 error where attribute is set in __new__. (amulhern)
  - Add to false positives an error which is not suppressed by a pragma.
    (amulhern)
  - Suppress W0201 errors (amulhern)
  - Make signature of Size.__str__ match signature of Decimal.__str__ (amulhern)
  - Do not evaluate % operator in log message arguments (amulhern)
  - Remove suite() methods in tests (amulhern)
  - Remove addKeyFromFile() method (amulhern)
  - Import name 'deviceaction' where needed (amulhern)
  - Setting variables in __init__ (amulhern)
  - Log exception information and disable W0703 warning. (amulhern)
  - Disable some W0703 warnings (amulhern)
  - Disable some W0703 warnings. (amulhern)
  - Add a function that logs available exception info. (amulhern)
  - Restrict scope of pylint pragmas as much as possible (amulhern)
  - Change all pylint numeric codes to mnemonic strings. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.49-1
changelog:
  - Slightly reduce loop and get rid of obsolete comment (amulhern)
  - Slightly rewrite loop to avoid a redefining builtin error (amulhern)
  - Simplify find_library and fix redefining built-in errors. (amulhern)
  - Make loop variables a little more descriptive (amulhern)
  - Make regular expressions raw strings. (amulhern)
  - Suppress unused variable warning and check for failure. (amulhern)
  - Add W0105 warning about attribute docstrings to false positives (amulhern)
  - Make signature of setup() in parent class same as in children (amulhern)
  - Suppress some correct pylint warnings (amulhern)
  - Get _loopMap.values() when all that's needed is the values (amulhern)
  - Obvious fix inspired by pylint E0602 error (amulhern)
  - Suppress W0631 warning for abbr and prefix. (amulhern)
  - Do not do formatting operation in the argument of the translation (amulhern)
  - Remove unnecessary global statements (amulhern)
  - Disable W0703 message in test (amulhern)
  - Explicitly set the module level platform variable (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.48-1
changelog:
  - Do not execute smallestMember property method twice. (amulhern)
  - Remove unnecessary function definitions in abstract properties (amulhern)
  - Pass format args as arguments to debug method (#1085057) (amulhern)
  - Move udev_settle call from util into fs to break circular dependency
    (amulhern)
  - Change implicit relative imports to explicit relative imports (amulhern)
  - Remove unused imports (amulhern)
  - Get rid of os.path import (amulhern)
  - Really avoid dynamic import of formats/__init__.py by itself (amulhern)
  - Ignore E1101 errors in savePassphrase. (amulhern)
  - Add a bunch of E1120 errors to the false positives file (amulhern)
  - Make LabelingAsRoot class an abstract class and define two properties
    (amulhern)
  - Suppress false positive W0631 error. (amulhern)
  - Use self.nic instead of nic (amulhern)
  - Make sure _state_functions is a dictionary in base class (amulhern)
  - Remove unnecessary lambda wrappers on assertion functions (amulhern)
  - Obvious fix inspired by an "Undefined variable warning" (amulhern)
  - Remove all references to lvm_vg_blacklist and blacklistVG. (amulhern)
  - Update for changes in the anaconda errorHandler API. (dshea)
  - Remove unused imports. (amulhern)
  - Import from the defining module. (amulhern)
  - Move import to top level. (amulhern)
  - Do not use implicit relative imports (amulhern)
  - Remove wildcard import (amulhern)
  - Fix a bug and catch a change in lvm's thin pool layout. (dlehman)
  - Plumb uuid down through DMDevice. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.47-1
changelog:
  - Change labelApp to a more concisely defined abstract property (amulhern)
  - Change defaultLabel to a more concisely defined abstract property. (amulhern)
  - Change _labelstrRegex to a more concisely defined abstract property.
    (amulhern)
  - Make reads property a bit more succinct. (amulhern)
  - Make name an abstract property and omit _name (amulhern)
  - Remove an unused import from devicelibs/raid.py (vpodzime)
  - Fix all pylint errors in pylintcodediff (amulhern)
  - Don't run test if the git branch is dirty (amulhern)
  - Exit if the specified log file does not exist. (amulhern)
  - Update lvm devicelibs tests to reflect recent changes. (dlehman)
  - Add required LVs as needed instead of trying to sort by attrs. (dlehman)
  - Fix missed conversion of rm->missing in vgreduce call. (dlehman)
  - Only gather lvm information one time per DeviceTree.populate call. (dlehman)
  - Add support for listing everything to pvinfo and lvs. (dlehman)
  - Get lv list from lvm in a more straightforward format. (dlehman)
  - Gather lv list where we use it to save from having to stash it. (dlehman)
  - Split out common lvm parsing code. (dlehman)
  - Add tests that use ParentList as part of Device. (dlehman)
  - Parent list length doesn't reflect new member in _addParent. (dlehman)
  - Rearrange _startEdd to be a little more obvious. (amulhern)
  - Raise exceptions using the new syntax (amulhern)
  - Do not import logging twice. (amulhern)
  - Suppress unused variable warning (amulhern)
  - Get rid of writeRandomUUID. (amulhern)
  - Remove unused variable but retain call for its side-effects (amulhern)
  - Put docstring in class (amulhern)
  - Remove appendiceal assignment (amulhern)
  - Keep first parameter "self" (amulhern)
  - Omit compile flag (amulhern)
  - Move lines beneath __main__ into a main method (amulhern)
  - Indent with spaces, not tabs (amulhern)
  - Change param default [] to None and convert in method (amulhern)
  - Change to a semantically equivalent version of FileDevice.path (amulhern)
  - Adapt existing tests to changed signature of some methods (amulhern)
  - Don't assign return value to unused variable (amulhern)
  - Be specific when catching exceptions (dshea)
  - Remove appendiceal assignments (amulhern)
  - Remove a lot of unused variables extracted from udev info (amulhern)
  - Don't get return values from communicate() if they are ignored (amulhern)
  - Use the disk's name in log message (amulhern)
  - Get rid of old exception unpacking syntax (dshea)
  - Rearranged some iffy exception checking (dshea)
  - Replace with a semantically equivalent chunk. (amulhern)
  - Remove some unused exception names. (amulhern)
  - Remove unused assignment to boot. (amulhern)
  - Delete method-local pruneFile function. (amulhern)
  - Don't comment out function headers but leave their bodies uncommented
    (amulhern)
  - Get rid of unnecessary pass statements (amulhern)
  - Put a field and a method in the base class (amulhern)
  - Spell parameter self correctly (amulhern)
  - Give abstract method the same signature as its overriding methods. (amulhern)
  - Catch correct error and disable warning. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.46-1
changelog:
  - Adapt callers to use the new parent list interface. (dlehman)
  - Change management of Device parents to use a simple list interface. (dlehman)
  - Convert ContainerDevice to an abstract base class. (dlehman)
  - Set device uuid before calling Device ctor. (dlehman)
  - Improve the mechanism for VG completeness. (dlehman)
  - Support mutually-obsoleting actions. (dlehman)
  - Add some checking to MDRaidArrayDevice._setSpares. (dlehman)
  - Make sorting by action type part of the action classes. (dlehman)
  - Add action classes for container member set management. (dlehman)
  - Add a property to provide consistent access to parent container device.
    (dlehman)
  - Add type-specific methods for member set management. (dlehman)
  - Adapt callers to new method names for add/remove member device. (dlehman)
  - Add a ContainerDevice class to consolidate member management code. (dlehman)
  - Add backend functions for container member set management. (dlehman)
  - Teardown RAID device once testing is over (amulhern)
  - Make lvm tests runnable. (amulhern)
  - Make crypt tests runnable. (amulhern)
  - Replace unnecessarily complicated expression with string multiplication
    (amulhern)
  - Suppress unused variable warning for index in range (amulhern)
  - Suppress some unused variable warnings. (amulhern)
  - Suppress some unused variable warnings (amulhern)
  - Update to the new raise syntax (dshea)
  - Removed an unnecessary semicolon (dshea)
  - Removed a redundant definition of NoDisksError (dshea)
  - Specify regular expressions containing backslashes as raw strings (dshea)
  - Fixed some questionable indentation (dshea)
  - Fix logging function string format warnings. (dshea)
  - All size specifications should be Size instances (#1077163) (vpodzime)
  - Make sure StorageDevice's self._size is a Size instance (#1077179) (vpodzime)
  - Allow creating Size instance from another Size instance (vpodzime)
  - Force removal of hidden devices (#1078163) (amulhern)
  - Get action_test into working order. (dlehman)
  - Update action_test.py to specify sizes using blivet.size.Size. (dlehman)
  - Don't corrupt the environment when setting up StorageTestCase. (dlehman)
  - Make minSize, maxSize consistent and correct. (dlehman)
  - Don't prevent grow actions on devices with no max size. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.45-1
changelog:
  - Changes to allow pylint checks to be run on a distribution of the source.
    (amulhern)
  - Remove non-doing check target (amulhern)
  - Add a script to relate pylint errors to lines changed. (amulhern)
  - Change output format so that it is suitable for diff-cover. (amulhern)
  - Do an initial setup for running pylint tests in blivet. (amulhern)
  - Handle None in devicePathToName(#996303) (dshea)
  - Remove bootloader.packages from storage.packages (#1074522). (clumens)
  - Whitespace fixes for the crypto devicelib module (vpodzime)
  - Use random.choice for generating LUKS backup passphrase (vpodzime)
  - Trivial fixes for the lvm devicelib module (vpodzime)
  - Make vginfo work the same way as pvinfo and other LVM functions (vpodzime)
  - Allow NTFS to be mountable. (#748780) (dshea)
  - Limit the LV size to VG's free space size (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 0.44-1
changelog:
  - Fix an old typo in zeroing out a PReP partition. (#1072781) (dlehman)
  - Only count with the extra metadata extents in new VGs and LVs (#1072999)
    (vpodzime)
  - Use container's parent's name for PV if available (#1065737) (vpodzime)
  - Fix traceback with write_dasd_conf. (#1072911) (sbueno+anaconda)
  - When copying a root, also copy hidden devices (#1043763) (amulhern)
  - Add hidden flag to devicetree.getDeviceByID (#1043763) (amulhern)
  - Only set device for mountpoint if it is not None (#1043763) (amulhern)
  - Extend the list of things to be omitted if moddisk is False (#1043763)
    (amulhern)
  - Set req_name to None at the top of initializer (#1043763) (amulhern)
  - Log action cancelation (#1043763) (amulhern)
  - Make DeviceTree.hide() remove a larger set (#1043763) (amulhern)
  - Re-write the DASD storage code. (#1001070) (sbueno+anaconda)
  - Include image install flag when updating from anaconda flags. (#1066008)
    (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.43-1
changelog:
  - Include tmpfs mounts in post-install kickstart (#1061063) (mkolman)
  - Count with the extra metadata extents for RAID consistently (#1065737)
    (vpodzime)
  - Make partitioning error message more friendly (#1020388) (amulhern)
  - Fix partition handling across multiple processActions calls. (#1065522)
    (dlehman)
  - Let the udev queue settle before populating the devicetree. (#1049772)
    (dlehman)
  - Don't activate or deactivate devices from the action classes. (#1064898)
    (dlehman)
  - Improve handling of parted.DiskLabelCommitError slightly. (dlehman)
  - Make teardownAll work regardless of flags. (dlehman)
  - Fix maxSize test when setting device target size. (dlehman)
  - Size.convertTo should return a Decimal. (dlehman)
  - Don't use float for anything. (dlehman)
  - Fix type of block count in PartitionDevice._wipe. (dlehman)
  - Fix handling of size argument to devicelibs.lvm.thinlvcreate. (#1062223)
    (dlehman)
  - return empty set when no matching fcoe nic (#1067159) (bcl)
  - Return str from Size.humanReadable (#1066721) (dshea)
  - Add a coverage test target (#1064895) (amulhern)
  - Filesystem labeling tests will not run without utilities (#1065422)
    (amulhern)
  - Rename misc_test.py to something more descriptive (#1065422) (amulhern)
  - Refactor labeling tests (#1065422) (amulhern)
  - Move SwapSpace tests into a separate class (#1065422) (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.42-1
changelog:
  - Wait for udev to create device node for new md arrays. (#1036014) (dlehman)
  - Fix detection of thin pool with non-standard segment types. (#1022810)
    (dlehman)
  - NFSDevice does not accept the exists kwarg. (#1063413) (dlehman)
  - Don't run mpathconf for disk image installations. (#1066008) (dlehman)
  - If /etc/os-release exists, check it to identify an installed system.
    (clumens)
  - Get the unit tests into a runnable state. (dlehman)
  - Update Source URL in spec file to use github. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.41-1
changelog:
  - ntfs _getSize needs to use Decimal (#1063077) (bcl)
  - Separate sanityCheck-ing from doAutoPartition (#1060255) (amulhern)
  - Change messages to SanityExceptions objects (#1060255) (amulhern)
  - Make a small SanityException hierarchy (#1060255) (amulhern)
  - Remove unused exception class (#1060255) (amulhern)
  - Add another .decode("utf-8") to humanReadable (#1059807) (dshea)
  - makebumpver: Any failure should cancel the bump (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.40-1
changelog:
  - makebumpver: Only remove from list if action is not Resolves (bcl)
  - Update bumpver to allow Related bugs (bcl)
  - Remove all dependent devices of san device becoming multipath (#1058939)
    (rvykydal)
  - When repopulating multipath members mark them as multipath (#1056024)
    (rvykydal)
  - fcoe: parse yet another sysfs structure for bnx2fc devices (#903122)
    (rvykydal)
  - fcoe: add fcoe=<NIC>:<EDB> to boot options for nics added manually (#1040215)
    (rvykydal)
  - Convert the ntfs minsize to an int (#1060031) (dshea)
  - Convert the string representation of Size to a str type. (#1060382) (dshea)
  - don't display stage2 missing error as well if the real problem is stage1
    (awilliam)
  - Provide a mechanism for platform-specific error messages for stage1 failure
    (awilliam)
  - Don't add None value to req_disks (#981316) (amulhern)
  - Make error message more informative (#1022497) (amulhern)
  - Check that file that loop device is going to use exists (#982164) (amulhern)
  - Use os.path.isabs to check whether path name is absolute (#994488) (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.39-1
changelog:
  - escrow: make sure the output directory exists (#1026653) (wwoods)
  - provide a more useful error message if user fails to create an ESP (awilliam)
  - Tell lvcreate not to ask us any questions and do its job. (#1057066)
    (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.38-1
changelog:
  - Some simple tests for _verifyLUKSDevicesHaveKey (#1023442) (amulhern)
  - Verify that LUKS devices have some encryption key (#1023442) (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.37-1
changelog:
  - Only do SELinux context resets if in installer mode (#1038146) (amulhern)
  - Look up SELinux context for lost+found where it is needed (#1038146)
    (amulhern)
  - Don't reset the SELinux context before the filesystem is mounted (#1038146)
    (amulhern)
  - Test setting selinux context on lost+found (#1038146) (amulhern)
  - Only retrieve the unit specifier once (dshea)
  - Fix the Device.id usage. (dshea)
  - Accept both English and localized sizes in Size specs. (dshea)
  - Use a namedtuple to store information on unit prefixes (dshea)
  - Remove en_spec Size parameters. (dshea)
  - Fix potential traceback in devicetree.populate. (#1055523) (dlehman)
  - Fall back on relabeling app where available (#1038590) (amulhern)
  - Change the meaning of label field values (#1038590) (amulhern)
  - Enable labeling on NTFS filesystem (#1038590) (amulhern)
  - Enable labeling on HFS filesystem (#1038590) (amulhern)
  - Add a method that indicates ability to relabel (#1038590) (amulhern)
  - Use filesystem creation app to set filesystem label (#1038590) (amulhern)
  - Import errors so FSError name is resolved (#1038590) (amulhern)
  - Remove BTRFS._getFormatOptions (#1038590) (amulhern)
  - Make an additional class for labeling abstractions (#1038590) (amulhern)
  - Fix copyright date (#1038590) (amulhern)
  - Remove redundant _defaultFormatOptions field (#1038590) (amulhern)
  - Remove code about unsetting a label (#1038590) (amulhern)
  - Return None if the filesystem has no label (#1038590) (amulhern)
  - Removed redundant check for existance of filesystem (#1038590) (amulhern)
  - Have writeLabel throw a more informative exception (#1038590) (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.36-1
changelog:
  - Update the TODO list. (dlehman)
  - Multipath, fwraid members need not be in exclusiveDisks. (#1032919) (dlehman)
  - Convert parted getLength values to Size (dshea)
  - Last of the Device._id -> Device.id (bcl)
  - iscsi: in installer automatically log into firmware iscsi targets (#1034291)
    (rvykydal)
  - Use isinstance for testing numeric types (vpodzime)
  - Device._id -> Device.id (clumens)
  - Allow resetting partition size to current on-disk size. (#1040352) (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.35-1
changelog:
  - Convert everything to use Size. (dlehman)
  - Allow negative sizes. (dlehman)
  - Fix return value of Size.convertTo with a spec of bytes. (dlehman)
  - Discard partial bytes in Size constructor. (dlehman)
  - Prefer binary prefixes since everything is really based on them. (dlehman)
  - Fix a few minor problems introduced by recent raid level changes. (dlehman)
  - Move label setter and getter into DeviceFormat class (#1038590) (amulhern)
  - Add a test for labeling swap devices (#1038590) (amulhern)
  - Default to None to mean none, rather than empty string (#1038590) (amulhern)
  - Add a labelFormatOK method to the DeviceFormat's interface (#1038590)
    (amulhern)
  - Indicate whether the filesystem can label (#1038590) (amulhern)
  - Restore ability to write an empty label where possible (#1038590) (amulhern)
  - More tests to check writing and reading labels (#1038590) (amulhern)
  - Remove fsConfigFromFile (#1038590) (amulhern)
  - Changes to the handling of filesystem labeling (#1038590) (amulhern)
  - Add some simple tests for file formats. (amulhern)
  - Give DeviceFormat objects an id (#1043763) (amulhern)
  - Refactor to use ObjectID class (#1043763) (amulhern)
  - Make a class that creates a unique-per-class id for objects (#1043763)
    (amulhern)
  - Revert "Make a class that creates a unique-per-class id for objects
    (#1043763)" (amulhern)
  - Revert "Give DeviceFormat objects an object_id (#1043763)" (amulhern)
  - Make the maximum end sector for PReP boot more benevolent (#1029893)
    (vpodzime)
  - Give DeviceFormat objects an object_id (#1043763) (amulhern)
  - Make a class that creates a unique-per-class id for objects (#1043763)
    (amulhern)
  - Make get_device_format_class return None if class not found (#1043763)
    (amulhern)
  - A few simple unit tests for some formats methods (#1043763) (amulhern)
  - Don't translate format names (dshea)


author: Brian C. Lane <bcl@redhat.com> - 0.34-1
changelog:
  - Forget existing partitions of device becoming a multipath member (#1043444)
    (rvykydal)
  - Include blivet.devicelibs.raid in the generated documentation. (amulhern)
  - Upgrade the comments in raid.py to be compatible with sphinx. (amulhern)
  - Make space for LUKS metadata if creating encrypted device (#1038847)
    (vpodzime)
  - fcoe: give error message in case of fail when adding device (#903122)
    (rvykydal)
  - fcoe: adapt bnx2fc detection to changed sysfs path structure (#903122)
    (rvykydal)
  - Update format of iscsi device becoming multipath member (#1039086) (rvykydal)


author: Brian C. Lane <bcl@redhat.com> - 0.33-1
changelog:
  - Add initial 64-bit ARM (aarch64) support (#1034435) (dmarlin)
  - Convert to sphinx docstrings. (dlehman)
  - Add some documentation. (dlehman)
  - Move getActiveMounts from Blivet into DeviceTree. (dlehman)
  - Add an example of creating lvs using growable requests. (dlehman)
  - Remove a whole bunch of unused stuff from Blivet. (dlehman)
  - Remove usage of float in Size.humanReadable. (dlehman)
  - Add missing abbreviations for binary size units. (dlehman)
  - Fix shouldClear for devices with protected descendants. (#902417) (dlehman)
  - Use // division so that it continues to be floor division in Python 3.
    (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.32-1
changelog:
  - Work on devicelibs.btrfs methods that require that the device be mounted.
    (amulhern)
  - Remove some methods from devicelibs.btrfs. (amulhern)
  - Add a comment to btrfs.create_volume. (amulhern)
  - Add a file to run btrfs tests. (amulhern)
  - Remove format.luks.LUKS.removeKeyFromFile. (amulhern)
  - Changes to devicelibs.mdraid.mdactivate. (amulhern)
  - Restore an import removed in a previous commit. (amulhern)
  - Add a PE for LUKS metadata (#1038969) (bcl)
  - Adjust currentSize methods slightly. (amulhern)
  - Put additional constraints on the ActionResizeDevice initializer. (amulhern)
  - Remove redundant checks in existing resize() methods. (amulhern)
  - Add some baseline unit tests for BTRFS devices. (amulhern)
  - Robustify use of defaultSubVolumeID field. (amulhern)
  - Check that a BTRFS subvolume has exactly one parent in constructor.
    (amulhern)
  - BTRFSSubVolume.volume checks the class of its return value. (amulhern)
  - Raise ValueError in BTRFS constructor if no parents specified. (amulhern)
  - Add tests for a couple of additional properties for MDRaidArrayDevice.
    (amulhern)
  - Factor state testing behavior into a separate class. (amulhern)
  - Remove redundant condition in if statement. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.31-1
changelog:
  - Make RAIDLevel an abstract class using abc. (amulhern)
  - Restore a util import that was removed in a recent commit. (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 0.30-1
changelog:
  - Always run action's cancel method as part of cancelAction. (dlehman)
  - Show Invalid Disk Label for damaged GPT (#1020974) (bcl)
  - Make error message in setDefaultFSType more informative (#1019766) (amulhern)
  - Set sysfsPath of LUKSDevice when adding to device tree (#1019638) (jsafrane)
  - Use given format type as format's name instead of type (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 0.29-1
changelog:
  - btrfs and xfs do not support fsck or dump at boot time (#862871) (bcl)
  - Removed raid level constants from mdraid.py. (amulhern)
  - Remove raidLevel and get_raid_min_members for mdraid.py. (amulhern)
  - Remove raidLevelString in raid and mdraid. (amulhern)
  - In devicefactory.py change mdraid procedures call to raid method calls.
    (amulhern)
  - Removed mdraid.raid_levels (amulhern)
  - Removed mdraid.get_raid_max_spares. (amulhern)
  - Change MDRaidArrayDevice to use raid package. (amulhern)
  - Changed devicelibs.mdraid to make use of devicelibs.raid. (amulhern)
  - Implement a RAID class hierarchy. (amulhern)
  - A few small tests for MDFactory class. (amulhern)
  - Add some additional unit tests in mdraid_tests.py. (amulhern)
  - Make MDRaidArrayDevice initializer not except raid level of None. (amulhern)
  - Add some basic unit tests for MDRaidArrayDevice. (amulhern)
  - Move pyanaconda import into blivet.enable_installer_mode. (amulhern)


author: David Lehman <dlehman@redhat.com> - 0.28-1
changelog:
  - Clear whole-disk formatting before initializing disks. (#1032380) (dlehman)
  - Simplify calculation of vol size when adding a btrfs subvol. (#1033356)
    (dlehman)
  - Handle passing a btrfs volume as device to BTRFSFactory. (dlehman)
  - Add support for detecting btrfs default subvolume. (dlehman)
  - Handle nested btrfs subvolumes correctly. (#1016959) (dlehman)
  - Mark all format names as translatable (dshea)
  - Add parameters for untranslated Size specs. (dshea)
  - Fix usage of _ vs N_ (dshea)
  - Added a i18n module for gettext functions. (dshea)
  - Allow non-ASCII characters in the size spec (dshea)


author: David Lehman <dlehman@redhat.com> - 0.27-1
changelog:
  - Specify btrfs volumes by UUID in /etc/fstab. (dlehman)
  - Catch any exception raised by findExistingInstallations. (#980267) (dlehman)
  - Prevent md_node_from_name from raising OSError. (#980267) (dlehman)
  - Tidy up tests in devicelibs_test directory. (amulhern)
  - Preparation for lv resize is a subset of that for lv destroy. (#1027682)
    (dlehman)
  - Make sure new values of targetSize are within bounds. (dlehman)
  - Devices with non-existent formatting are resizable. (#1027714) (dlehman)
  - Do not hide non-existent devices. (#1027846) (dlehman)
  - Change XFS maximum to 16EB (#1016035) (bcl)
  - Add tmpfs support (#918621) (mkolman)
  - Add support for returning machine word length (mkolman)
  - Require cryptsetup instead of cryptsetup-luks (#969597) (amulhern)
  - Fix initialization of disks containing sun or mac disklabels. (dlehman)
  - Newly formatted devices are used unless mountpoint is empty. (#966078)
    (dlehman)
  - Fix detection of lvm setups. (#1026466) (dlehman)
  - Fix handling of overcommitted thin pools in thinp factory. (#1024144)
    (dlehman)
  - Fix name checking for new thin lvs. (#1024076) (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.26-1
changelog:
  - Add macefi format type (#1010495) (bcl)
  - Allow hfs+ boot devices to have their name set (#1010495) (bcl)
  - Update parted partitions on hidden disks when copying a Blivet. (#1023556)
    (dlehman)
  - Add ack flag checking to makebumpver (bcl)
  - Add makebumpver script (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.25-1
changelog:
  - Remove requirement for btrfsctl which no longer exists. (#1012504) (dlehman)
  - Allow for adjustment of factory vg after removal of thin pool. (#1021890) (dlehman)
  - Add boot description for "disk" devices on s390. (#867777, #903237, #960143) (sbueno+anaconda)
  - Add initial spport for aarch64 as we only plan to support UEFI this should be enough (dennis)


author: David Lehman <dlehman@redhat.com> - 0.24-1
changelog:
  - Close file descriptors other than stdin,stdout,stderr on exec. (#1016467) (dlehman)
  - Don't use hardcoded /tmp paths. (#1004404) (dlehman)
  - Fix detection of lvm thinp setups. (#1013800) (dlehman)
  - Generate a name if necessary when reconfiguring a factory device. (#1019500) (dlehman)
  - Handle anaconda's cmdline option to disable mpath friendly names. (#977815) (dlehman)
  - Allow specifying which swaps should appear in fstab (vpodzime)
  - Do not limit swap size to 10 % of disk space for hibernation (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 0.23-1
changelog:
  - Make sure bootloader is setup after autopart (#1015277) (bcl)
  - Let setUpBootLoader raise BootloaderError (#1015277) (bcl)
  - Limit the maximum swap size to 10 % of disk space (if given) (vpodzime)
  - support ppc64le architecture (hamzy)
  - Don't call handleUdevDeviceFormat without udev device (#1009809) (dshea)


author: David Lehman <dlehman@redhat.com> - 0.22-1
changelog:
  - Allow implicit inclusion of multipath/fwraid by including all members. (dlehman)
  - If a device has been removed, omit it from the copied root. (#1004572) (dlehman)
  - Thinp metadata and chunk size default to 0 -- not None. (#1004718) (dlehman)
  - Revert "Do not try to align partitions to optimal_io_size. (#989333)" (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.21-1
changelog:
  - Only force luks map names to include UUID during OS installation. (#996457) (dlehman)
  - Allow DiskLabelCommitError to reach the caller. (#1001586) (dlehman)
  - Do not try to align partitions to optimal_io_size. (#989333) (gustavold)
  - Fix rpmlog make target (bcl)
  - Add missing changelog lines to spec (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.20-1
changelog:
  - Fix typo in examples/list_devices.py (dlehman)
  - Use iscsi-iname instead of trying to reimplemnt it in python. (dlehman)
  - Catch exceptions raised while finding old installations. (#981991) (dlehman)
  - Keep the dasd list in sync with the devicetree's device list. (#965694) (dlehman)
  - Don't save luks keys unless installer_mode flag is set. (#996118) (dlehman)
  - Pass mount options to resolveDevice in _parseOneLine (#950206) (vpodzime)
  - Fix handling of devices in detected installations in Blivet.copy. (dlehman)
  - Clean up detection of lvm raid. (dlehman)
  - Tag the first build of each version without the release. (dlehman)
  - Remove dangling code block from commit 737169b75af1. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.19-1
changelog:
  - Don't waste time looking for devices dependent on leaf devices. (dlehman)
  - Add some example code for creation of disk partitions. (dlehman)
  - Don't manipulate partition boot flags except in installer mode. (dlehman)
  - Add an example of DeviceFactory usage. (dlehman)
  - Cosmetic changes for the arch module (vpodzime)
  - No more sparc support (vpodzime)
  - Cleanup arch.py reredux (hamzy)
  - Allow explicit requests for extended partitions. (#891861) (dlehman)
  - Fix disklabel handling for multiple calls to processActions. (dlehman)
  - Add support for explicit start/end sectors in partition requests. (#881025) (dlehman)
  - Store current mount options in getActiveMounts. (#914898) (dlehman)
  - Lack of formatting does not preclude device resize. (dlehman)
  - Handle negative sizes correctly. (dlehman)
  - Fix handling of clearpart type linux in shouldClear. (dlehman)
  - Add some tests for clearpart and related functionality. (dlehman)
  - Update unit tests and add a make target to run them. (dlehman)
  - Don't pass dracut args for lvm thin pools. (dlehman)
  - Update the TODO list. (dlehman)
  - Fix a copy/paste error. (dlehman)
  - Remove transifex-client BuildRequires. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.18-1
changelog:
  - Raise XFS max size limit to 100TB. (sbueno+anaconda)
  - Add a device factory class for thinly-provisioned lvm. (dlehman)
  - Add support for automatic partitioning using lvm thin provisioning. (dlehman)
  - Add convenience methods related to lvm thin provisioning. (dlehman)
  - Add support for detection of lvm thinp setups. (dlehman)
  - Add classes for lvm thin pool and thin volume. (dlehman)
  - Add backend support for lvm thinp operations. (dlehman)
  - Fix return value of get_pv_space for size of 0. (dlehman)
  - Fix ksdata for lvm created in custom spoke based on autopart. (dlehman)
  - Only put max size in ksdata if partition is growable. (dlehman)
  - Allow subclasses to inherit ksdata classes. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.17-1
changelog:
  - Used Python type instead of variable name (#968122) (hamzy)
  - Fix detection of valid EFI system partition during autopart. (dlehman)
  - New version: 0.16 (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.16-1
changelog:
  - Install utilities for all devices -- not just those being used. (#964586) (dlehman)
  - Add a method to apply Blivet settings to ksdata. (dlehman)
  - Increase padding for md metadata in lvm factory. (#966795) (dlehman)
  - Move lvm-on-md into LVMFactory. (dlehman)
  - Switch to a minimum of four members for raid10. (#888879) (dlehman)
  - Update the TODO list. (dlehman)
  - Deactivate devices before hiding those on ignored disks. (#965213) (dlehman)
  - Allow udev queue to settle after writing zeros to disk. (#969182) (hamzy)
  - Run lsof when umount fails (bcl)
  - Run udev settle before umount (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.15-1
changelog:
  - Switch to the LGPLv2+. (dlehman)
  - Clear md arrays' sysfs path after deactivating them. (#954062) (dlehman)
  - Factories with existing containers use the container's disk set. (dlehman)
  - Don't set up a child factory if the container is set and exists. (dlehman)
  - Set a non-zero size for new btrfs subvols in an existing volume. (dlehman)
  - Open as many luks devs as possible with any given passphrase. (#965754) (dlehman)
  - Make sure container changes worked before applying device changes. (#965805) (dlehman)
  - Re-initialize platform in storageInitialize (#962104) (bcl)
  - Make a copy of devicetree._devices before using the append operator. (clumens)
  - Handle incomplete devices becoming complete on device rescan. (clumens)
  - Don't allow a device to be on the hidden list more than once. (clumens)


author: David Lehman <dlehman@redhat.com> - 0.14-1
changelog:
  - total_memory calculation needs to round up (#962231) (bcl)
  - The dev.node attribute for iscsi devices is not copyable (#962865). (clumens)
  - Wipe partitions before they are created (#950145) (bcl)
  - Pass ROOT_PATH as an argument instead of importing it. (clumens)
  - If no iscsi nodes are discovered, return an empty list instead of None. (clumens)


author: Brian C. Lane <bcl@redhat.com> - 0.13-1
changelog:
  - Make sure createBitmap is updated when level changes (#960271) (bcl)
  - Update biosboot error message (#960691) (bcl)


author: David Lehman <dlehman@redhat.com> - 0.12-1
changelog:
  - Fix a bug in renaming lvm lvs. (dlehman)
  - Add container size policies for unlimited growth and fixed size. (dlehman)
  - Remove device factory methods to change container name. (dlehman)
  - Override any default subvol when mounting main btrfs volume. (#921757) (dlehman)
  - Fix detection of multipath. (#955664) (dlehman)
  - When a btrfs subvol's name is changed, change its subvol argument too. (clumens)
  - Allow returning hidden disks from the getDeviceBy* methods, if asked. (clumens)
  - Fix fipvlan -f argument once more and for good (#836321) (rvykydal)
  - Remove the intf parameters from the iscsi class. (clumens)
  - Don't relly on /proc/mdstat when enumeraing RAID levels. (jsafrane)
  - Set product names in non-installer mode. (jsafrane)
  - Fixed checking status of MD RAID which was just deleted. (jsafrane)
  - Account for the fact that md's metadata usage is unpredictable. (dlehman)
  - Remove members from their containers before destroying them. (dlehman)
  - Make get_container work even if there are duplicate names. (dlehman)
  - LVMFactory with a container_raid_level means use LVMOnMDFactory. (dlehman)
  - Add a check for enough raid members after allocating partitions. (dlehman)
  - Make parent_factory an attribute of the DeviceFactory instance. (dlehman)
  - All container settings use container_ kwargs. (dlehman)
  - Add ability to find raid level of an lvm vg. (dlehman)
  - Always pass -f to wipefs since it lies about in-use devices. (#953329) (dlehman)
  - Fix a bug extended partition management. (#951765) (dlehman)
  - Don't return incomplete devices from getDeviceByFoo methods by default. (dlehman)
  - Don't traceback when degraded md raid arrays are present. (#953184) (dlehman)


author: David Lehman <dlehman@redhat.com> - 0.11-1
changelog:
  - Fix handling of isohybrid media. (#950510) (dlehman)
  - Fix getting dracut setup args from dasd.conf. (#950964) (dlehman)


author: David Lehman <dlehman@redhat.com> - 0.10-1
changelog:
  - Extended partitions containing logical partitions are not leaves. (#949912) (dlehman)
  - Remove devices in reverse order in Blivet.recursiveRemove. (#949912) (dlehman)
  - Rewrite the DeviceFactory classes. (dlehman)
  - Hook up error handling in installer-specific methods. (#948250) (dlehman)
  - Don't traceback if fcoe.startup is called without fcoe utils present. (dlehman)
  - Fix logic error that causes us to ignore disks in exclusiveDisks. (dlehman)
  - Slightly improve currentSize for btrfs volumes. (dlehman)
  - Simplify multipath handling. (dlehman)
  - Don't expect anaconda udev rules to be in use. (dlehman)
  - Drop requires for things only needed for OS installation. (dlehman)
  - New version: 0.9 (bcl)
  - Only install packages for devices and filesystems used by the OS. (dlehman)
  - Fix LVMLogicalVolumeDevice.maxSize. (dlehman)
  - Fix handling of name=None in newLV, newMDArray, newVG. (dlehman)
  - Allow calls to suggestDeviceName with only a prefix argument. (dlehman)
  - Move mdadm superblock size calculation into devicelibs.mdraid. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.9-1
changelog:
  - NTFS.minSize is supposed to be a property. (#924410) (dlehman)
  - Mount /run during install and fix /sys mount (#922988) (bcl)
  - Fix two excptions triggered by calls to copy_to_system. (hamzy)


author: David Lehman <dlehman@redhat.com> - 0.8-1
changelog:
  - Check for "ip=ibft" cmdline option, not for "ibft". (rvykydal)
  - run_program returns an int. (#920584) (dlehman)
  - Fix units for lvs output. (dlehman)
  - Don't pass an intf arg to ISCSI.stabilize. (#920041) (dlehman)
  - Add __version__ to blivet/__init__.py. (dlehman)
  - Only run info prog (eg: dumpe2fs) once per filesystem. (dlehman)
  - Processing of a PV with no VG metadata is easy. (dlehman)
  - Add some convenience properties for displaying DeviceAction info. (dlehman)
  - Ignore MTDs, as we do not have the tools to write to them (#916771). (clumens)
  - Include udev's list of symbolic links in StorageDevice. (#914724) (dlehman)
  - Set a DeviceFormat instance's type attribute to the requested type. (dlehman)
  - Allow size specs that do not include a 'b' or 'B'. (#888851) (dlehman)
  - Fix reference to 'factory' from within DeviceFactory class. (dlehman)
  - Fix problems detecting lvm and md devices. (#914730) (dlehman)
  - Allow passing size=None to device factories for unbounded growth. (dlehman)
  - Provide a way to set the default fstype for a Blivet instance. (#838145) (dlehman)
  - Allow changing the size of encrypted devices via DeviceFactory. (#913169) (dlehman)
  - Don't dump storage state except in installer mode. (dlehman)
  - Fix device resolution for btrfs. (dlehman)
  - Fix device resolution to find named md devices. (dlehman)
  - Account for active mounts in normal mode. (#914898) (dlehman)
  - Add an example script which lists all devices. (dlehman)
  - Add scripts/makeupdates script (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.7-1
changelog:
  - Merge branch 'master' of git+ssh://git.fedorahosted.org/git/blivet (bcl)
  - Bring in productName from pyanaconda in installer mode. (#913559) (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 0.6-1
changelog:
  - parse buffer output from resize (#913141) (bcl)
  - prevent traceback when root device is not defined #rhbz883768 (sbueno+anaconda)
  - Move empty_disk to a top-level function, and rename. (clumens)
  - Add some high-level comments to DeviceFactory.configure_device. (dlehman)
  - Refactor DeviceFactory.set_container_members for clarity. (dlehman)
  - Rename the main blivet logger from "storage" to "blivet". (dlehman)
  - Use the blivet domain for translations. (dlehman)
  - Move DeviceFactory classes and related code into a new file. (dlehman)
  - New version: 0.5 (dlehman)


author: David Lehman <dlehman@redhat.com> - 0.5-1
changelog:
  - Add mountOnly to turnOnFilesystems (bcl)
  - Update lvm scanning to account for new ignored device handling. (dlehman)
  - Scan in all devices and then hide those that use ignored disks. (dlehman)
  - Adjust child counts correctly when unhiding a device. (dlehman)
  - Generate lvm config args each time they're needed/used. (dlehman)
  - Add ability to grab 70-anaconda.rules udev data directly. (dlehman)
  - Add support for active luks mappings at populate time. (dlehman)
  - Don't require nss, required only for escrow key support. (dlehman)
  - Update the TODO list. (dlehman)
  - Add missing constant DMI_CHASSIS_VENDOR. (dlehman)
  - Allow for multiple calls to DeviceTree.processActions. (#881023,#846573) (dlehman)
  - Use CGit snaphot URL for Source in specfile. (dlehman)
  - Streamline some logic in storageInitialize. (dlehman)
  - Don't re-add deleted or hidden devices during DeviceTree.populate. (dlehman)
  - Only run findExistingInstallations and start iscsi, &c in installer mode. (dlehman)
  - Do not change device status during populate in normal mode. (#817064) (dlehman)
  - Drop old code related to saving clearPartType from pre-f18. (dlehman)
  - check for skipping bootloader in doIt (bcl)
  - check for stage1 when not installing bootloader (#882065,#895232) (bcl)
  - explicitly detect iso9660 on a disk (#903158) (bcl)
  - Fix several problems in python-blivet.spec. (dlehman)
  - Remove #!/usr/bin/python from tsort.py (dlehman)
  - Update COPYING file. (dlehman)
  - Add a Requires for dmidecode on x86. (dlehman)


author: David Lehman <dlehman@redhat.com> - 0.4-1
changelog:
  - Use a two-part version number instead of three. (dlehman)
  - Rename the rpm package from blivet to python-blivet. (dlehman)
  - Move get_mount_device, get_mount_paths from pyanaconda.packaging to util. (dlehman)
  - Update the TODO list. (dlehman)
  - Carry over s390 exclusion of fcoe-utils from anaconda. (dlehman)
  - Enable translations via transifex. (dlehman)


author: David Lehman <dlehman@redhat.com> - 0.2-1
changelog:
  - Add Requires: iscsi-initiator-utils, fcoe-utils, device-mapper-multipath. (dlehman)
  - Use a threading lock to control program log output. (dlehman)
  - Fix reference to data to refer to ksdata in Blivet constructor. (dlehman)
  - Remove the loop around proc.communicate in util._run_program. (dlehman)


author: David Lehman <dlehman@redhat.com> 0.2-1
changelog:
  - Updated source from final pre-split anaconda source.
  - Renamed pyanaconda.storage to blivet throughout.
  - Updated spec file to include runtime Requires.


author: Tim Waugh <twaugh@redhat.com> 1.5.2-4
changelog:
  - Fixed build root.
  - Give IDs to nodes in the release notes source to prevent releasenotes.html
    having multilib conflicts (bug #228320).


author: Ville Skyttä <ville.skytta at iki.fi> - 1.5.2-0.1.pre1
changelog:
  - Fix build dependencies.
  - Require exact version of main package in -devel.
  - Build with dependency tracking disabled.
  - Add %{_datadir}/xml to default search path.
  - Run test suite during build.
  - Add URL tag.
  - Use %find_lang.
  - Cosmetic improvements.


author: Jiri Popelka <jpopelka@redhat.com> - 4.0.8-5
changelog:
  - Use _cups_serverbin macro from cups-devel instead of hard-coded /usr/lib/cups.
  - No need to define BuildRoot and clean it in clean and install section anymore.
  - Add argument for format in a debugging string (bug #726384).


author: Tim Waugh <twaugh@redhat.com> - 4.0.4-3
changelog:
  - Removed old explicit provides for perl(Foomatic::GrovePath).
  - Fixed macro in changelog.
  - Avoid mixed spaces and tabs.
  - Ship COPYING files.
  - Added comments for sources.


author: Tim Waugh <twaugh@redhat.com> - 4.0.4-2
changelog:
  - Make it explicit that the build requires foomatic-db.  This is
    needed for postscriptdriver tags.


author: Tim Waugh <twaugh@redhat.com> 4.0.2-5
changelog:
  - Use stcolor driver for Epson Stylus Color 200 (bug #513676).
  - Don't ship 3-distribution symlink as CUPS already searches
    /usr/share/ppd (bug #514244).
  - Remove non-PPD files from PPD directory (bug #514242).


author: Tim Waugh <twaugh@redhat.com> 4.0.2-1
changelog:
  - Updated db-engine to 4.0.2 (bug #503188).
  - Updated foomatic-filters to 4.0.2 (bug #496521).
  - Updated db-hpijs to 20090701.
  - Updated db to 4.0-20090702.
  - This package obsoletes oki4linux (bug #491489).
  - Don't ship ChangeLog/README/USAGE for each of the 4 packages as it
    comes to more than 1MB (bug #492449).
  - Don't use mktemp in foomatic-rip.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-69
changelog:
  - Updated db-hpijs to 20090110.
  - Updated db to 20090110.
  - Updated filters to 3.0-20090110.
  - Updated db-engine to 3.0-20090110.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-68
changelog:
  - Updated db-hpijs to 20081124.
  - Updated db to 20081124.
  - Updated filters to 3.0-20081124.
  - Updated db-engine to 3.0-20081124.
  - Better build root.
  - Fixed summary.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-65
changelog:
  - Removed ampathxml and xml-cflags patches.
  - Updated db-hpijs to 20080904.
  - Updated db to 20080904.
  - Updated filters to 3.0-20080904.
  - Updated db-engine to 3.0-20080904.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-61
changelog:
  - Updated db-hpijs to 20080710.
  - Updated db to 20080710.
  - Updated filters to 3.0-20080710.
  - Updated db-engine to 3.0-20080710.
  - Ship a defaultspooler file to avoid the need for spooler
    auto-detection (bug #454684).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-56
changelog:
  - Updated filters to 3.0-20080211.
  - Updated db-hpijs to 20080211.
  - Updated db-engine to 3.0-20080211.
  - Updated db to 3.0-20080211.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-53
changelog:
  - Updated db-hpijs to 20071218.
  - Updated db to 3.0-20071218.
  - Updated db-engine to 3.0-20071218.
  - Updated filters to 3.0-20071218 (bug #416881).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-51
changelog:
  - Build requires perl(ExtUtils::MakeMaker).
  - Updated filters to 3.0-20070919.
  - Updated db to 20070919.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-50
changelog:
  - Removed references to unshipped drivers:
    * drv_x125
    * ml85p
    * pbm2lxwl
    * pbmtozjs
    * bjc800j


author: Tim Waugh <twaugh@redhat.com> 3.0.2-49
changelog:
  - Safe default margins for PPDs (bug #244161).
  - Added missing IEEE 1284 ID for HP Photosmart 380 (bug #241352).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-48
changelog:
  - Updated db to 3.0-20070614.
  - Updated db-engine to 3.0-20070614.
  - Updated db-hpijs to 20070614.
  - Updated filters to 3.0-20070614.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-43
changelog:
  - Updated db to 3.0-20070105 (bug #214037, bug #191661, bug #198999,
    bug #191504, bug #187387, bug #188762, bug #170373, bug #221121,
    bug #214801).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-39
changelog:
  - Updated db-engine to 3.0-20061031.
  - Updated db to 3.0-20061031.
  - Remove references to foo2zjs and foo2oak (bug #208851).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-38
changelog:
  - Change a2ps requirement to mpage.
  - Make CUPS driver work with drivers containing '-' in their names
    (bug #201398).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-32
changelog:
  - Fix foomatic-cleanupdrivers.
  - Updated db-engine to 3.0-20060117.
  - Handle PPDs with default option values of '0'.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-29
changelog:
  - Updated db-engine to 3.0-20051209.
  - Updated db-hpijs to 1.5-20051209.
  - Updated filters to 3.0-20051209.  No longer need rip-cvs patch.
  - Updated db to 3.0-20051209.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-28
changelog:
  - Remove explicit perl module package dependencies.  These should be
    picked up by the RPM during the build process automatically anyway.
    Fixes bug #167997.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-25
changelog:
  - Add IEEE 1284 ID for HP LaserJet 4200 (bug #166638).
  - Add IEEE 1284 ID for HP LaserJet 5000 (bug #167154).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-24
changelog:
  - Updated db to 3.0-20050804.
  - No longer need hplj5 patch.
  - Conflicts with system-config-printer before the parser bug was fixed.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Add IEEE 1284 ID for Epson Stylus Photo 915 (bug #160030).
  - Add IEEE 1284 ID for Ricoh Aficio 2228C PS (bug #160036).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix Postscript driver (bug #151645).
  - Add IEEE 1284 ID for HP DeskJet 5150 (bug #154518).
  - Add IEEE 1284 ID for HP LaserJet 2420 (bug #114191).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Corrected IEEE 1284 information for HP DeskJet 6540 (bug #147288).
  - Added IEEE 1284 information for Epson Stylus C82 (bug #147230).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Added IEEE 1284 information for Okidata Okipage 6ex (bug #143964).
  - Added IEEE 1284 information for Epson Stylus Photo R300 (bug #143939).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-10
changelog:
  - Added IEEE 1284 information for HP-Color_Inkjet_Printer_CP1700 (bug #141594).
  - Added IEEE 1284 information for Samsung-ML-1710 (bug #141163).
  - Added IEEE 1284 information for HP-OfficeJet_G95 (bug #141057).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-9
changelog:
  - Updated db to 20041124.
  - Updated hpijs-db to 1.5-20041124.
  - No longer need HP DJ 6122 patch.
  - No longer need ieee1284 patch.
  - Updated Omni-printers to 0.9.2.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-6
changelog:
  - Add autodetect information for HP LaserJet 8150 (bug #139683).
  - Add autodetect information for Epson Stylus Color 777 (bug #139629).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-5
changelog:
  - Ship data as non-executable (bug #139271).
  - Corrected autodetect information for HP Business InkJet 1100 (bug #139258).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-4
changelog:
  - Add autodetect information for HP Business InkJet 1100 (bug #139258).
  - Add autodetect information for Epson Stylus Photo 790 (bug #139266).
  - Add autodetect information for HP DJ 3820 (bug #139271).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-2
changelog:
  - Use gimp-print driver for HP 2000C (bug #133647).
  - Add autodetect information for Lexmark Z52 (bug #135178).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-1
changelog:
  - Updated filters to 3.0.2.
  - Updated db-engine to 3.0.2.
  - No longer need Omni PageSize patch or lvalue patch.


author: Tim Waugh <twaugh@redhat.com> 3.0.1-1
changelog:
  - Upgrade db to 20040219.
  - Upgrade hpijs to 1.5-20040219.
  - Upgrade engine to 3.0.1.
  - Upgrade filters to 3.0.1.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-23
changelog:
  - Fix up HP Color Inkjet CP1700 support.
  - Remove PrintoutMode option from gimp-print driver to avoid breaking it.
  - Update filters to 3.0.1rc3.
  - Update engine to 3.0.1rc2
  - No long need symlink patch.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-21
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - Revert Omni update temporarily.
  - Downgrade engine to 20031217 to stick to the stable branch.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-19
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - No longer need symlink patch.
  - Updated fontpath patch.
  - Updated engine to 20040112.
  - Updated db to 20040112.
  - Updated gimp-print data to 4.2.6.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-18
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - Explicitly state conflict with hpijs < 1.5.
  - Make foomatic-ppdfile accept '-t type' like foomatic-datafile used to.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-14
changelog:
  - Updated db to 20031217.
  - Updated engine to 20031217.
  - Updated hpijs to 1.5-20031217.
  - Use relative symlinks.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-12
changelog:
  - Undo over-zealous percent escaping in PostScript.xml
  - Build requires libxml2-devel (bug #110589).
  - Use relative, not absolute, symlink for CUPS filter.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-10
changelog:
  - Updated db to 20031105.
  - Drop filters path patch.
  - Updated fontpath patch, both libdir patches.
  - Updated engine and filters to 3.0-20031105.
  - Updated hpijs db to 1.4-1.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-5
changelog:
  - Add some Dell printers.
  - Updated foomatic-db to 20030603.
  - Updated missing UPP list for ghostscript 7.07.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-0.beta2.1
changelog:
  - 3.0.0beta2.
  - Updated path patch.
  - No longer need FOOMATIC_LIBDIR, generic PS, ids, postscript-duplex,
    hpijs13, psc2210, duplex184 patches.
  - Add hpijs support back in.
  - Fix up references to old printer IDs.


author: Tim Waugh <twaugh@redhat.com> 2.0.2-11
changelog:
  - Add autodetect info for HP DeskJet 656C.  It doesn't really do
    IEEE 1284 IDs, but since it's a USB device we can figure out its
    manufacturer and model anyway.


author: Tim Waugh <twaugh@redhat.com> 2.0.2-1
changelog:
  - 2.0.2.
  - No longer need 67973, 970c patches.
  - Remove cups-drivers-* packages (no longer needed).
  - Remove files not shipped.  Ship filter.conf.
  - Conditionally restart cups.
  - Use libdir.
  - Don't put things in site_perl; use vendor_perl instead (bug #73528).


author: Tim Waugh <twaugh@redhat.com> 1.9-0.20020517.3
changelog:
  - Remove explicit perl-Storable dependency; it should be perl(Storable),
    and that is picked up automatically.


author: Tim Waugh <twaugh@redhat.com> 1.9-0.20020517.2
changelog:
  - Fix release number.
  - Drop gen-ppds from the file manifest---use foomatic-compiledb instead
    (bug #63622).


author: Tim Waugh <twaugh@redhat.com> 1.9-0.20020517.0.1
changelog:
  - Update to CVS.
  - Updated requirements.
  - Updated path and libdir patches.
  - Drop hpijs 1.0.2 patch.
  - foomatic-datafile has moved to %{_bindir}.
  - Update gimp-print data to 4.2.1.
  - Update Omni printer data to 0.6.1.


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20020130.1
changelog:
  - Update to CVS.
  - No longer need the cachedir patch.
  - Fix config file path.
  - Look in /usr/local/bin last, not first, in lpdomatic (bug #57915).


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20020129.1
changelog:
  - Update to CVS.
  - Patches no longer needed: prepend, fd3.
  - Use RPM_OPT_FLAGS.
  - Allow non-root users to use foomatic-datafile (bug #58956).


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20020124.1
changelog:
  - Update to CVS.
  - Updated Omni printers to those in Omni 0.5.1.
  - Updated patches: prepend, fd3.
  - Patches no longer needed: utf8, lpdomatic.
  - Added gimp-print (formerly stp) foomatic db info, and removed the old
    stp.xml file.
  - Conflict with ghostscript if it doesn't have gimp-print-4.2.0 yet.


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20011218.2
changelog:
  - REALLY fix PCL fixup code (bug #55909, others).
  - PreReq fileutils, initscripts (bug #56984).
  - Fix prepends in lpdomatic (bug #57371).
  - Run foomatic-cleanupdrivers during install, to remove driver entries
    with no command line.
  - Put lpdomatic in /usr/sbin again.
  - Fix foomatic-gswrapper's file descriptor manipulations (bug #56871).


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011217.2
changelog:
  - fix the rest of the quoting issues with foomatic-combo-xml with the patch
  - foomatic-1.1-20011217-quotes.patch. This has been sent upstream.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011217.1
changelog:
  - respin to pull in latest foomatic database, fixes:
    - properly use the cache in relation to foomatic-combo-xml's output
    - fix _some_ of the quoting issues with calling foomatic-combo-xml


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011205.1
changelog:
  - respin to pull in latest foomatic database, fixes:
    - droping half of a large job
    - -Mutf8 added to the upstream filters
    - miscelaneous printer db updates


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011018.5
changelog:
  - changed the patch to use the -Mutf8 command line option,
  - and to restart the printserver, after rebuilding the settings.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011018.4
changelog:
  - grumble. Some drivers use inline perl scripts, and need the 'use utf8;'
  - pragma. Without it, they break on _some_ of their options.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20010905.1
changelog:
  - upgraded to latest foomatic, we now have fast overview generation!
  - this means that there is no prebuilt overview file.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20010828.1
changelog:
  - WOW! The latest foomatic uses Till Kamppeter's C based combo compiler.
  - It is now fast enough that there is no real benifit to precompiling.
  - NOTE: this forces the package to stop being noarched.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20010825.1
changelog:
  - did a fresh database pull, which contains the old japanese printers as well.
  - removed japanese hack.


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010717mdk
changelog:
  - Added job listing/removal/manipulation and queue control to
    foomatic-printjob
  - Support for printing multiple copies with PDQ


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010714mdk
changelog:
  - Included the cupsomatic filter script
  - When a queue is set up, default options can be set now
  - Help messages of foomatic-configure and foomatic-printjob cleaned up.


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010713mdk
changelog:
  - Many bugfixes in "foomatic-printjob".
  - "foomatic-configure" adds the Foomatic config file directory automatically
    to the search paths of PDQ.
  - Printing a help page under PDQ was broken.


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010711mdk
changelog:
  - initial release.
  - Deleted the obsolete drivers "stp", "cZ11", and "hpdj".
  - Patch applied which flushes the memory cache regularly, otherwise
    foomatic-configure would hang when the Foomatic data of GIMP-Print is
    installed.


author: Chris Leech <cleech@redhat.com> - 1.0.1-3.git036e314
changelog:
  - 1273663 sync with upstream v1.0.1-26-g036e314
    system capability incorrect advertised as station only


author: Petr Šabata <contyk@redhat.com> - 0.9.46-1
changelog:
  - 0.9.46 bump
  - 802.1Qaz fixes to enable support on not CEE DCBX-enabled hardware
  - 802.1Qbg EVB module support
  - lldpad now supports bonded interfaces


author: Petr Sabata <contyk@redhat.com> - 0.9.43-2
changelog:
  - Apply various upstream 0.9.43 bugfixes
  - Include not yet accepted Jens Osterkamp's patch to fix bug #720080
  - Whitespace cleanup, phew


author: Petr Sabata <contyk@redhat.com> - 0.9.42-2
changelog:
  - Introduce systemd unit file, drop SysV support
  - Call systemctl instead of service and chkconfig
  - Enable the service only on new installation (post)
  - Clean exit patch


author: Petr Sabata <contyk@redhat.com> - 0.9.42-1
changelog:
  - 0.9.42 bump (massive patches cleanup)
  - Remove obsolete defattr
  - Remove COPYING and README from devel subpackage


author: Petr Sabata <psabata@redhat.com> - 0.9.41-1
changelog:
  - 0.9.41 bump
  - New BR: autotools, flex
  - Buildroot garbage removed
  - Devel post and preun scriptlets sanitized


author: Jan Zeleny <jzeleny@redhat.com> - 0.9.38-1
changelog:
  - rebased to 0.9.38 (various enhancements and bugfixes, see 
    lldpad-0.9.38-relnotes.txt on http://e1000.sf.net for complete list)


author: Jan Zeleny <jzeleny@redhat.com> - 0.9.32-1
changelog:
  - rebased to 0.9.32 (various enhancements and bugfixes, see 
    lldpad-0.9.32-relnotes.txt on http://e1000.sf.net for complete list)


author: Jan Zeleny <jzeleny@redhat.com> - 0.9.26-1
changelog:
  - rebased to 0.9.26
  - package renamed to lldpad
  - enahanced functionality (LLDP supported as well as DCBX)


author: Karsten Hopp <karsten@redhat.com> 0.9.15-4
changelog:
  - buildrequire libconfig-devel >= 1.3.2, it doesn't build with 1.3.1 due to
    the different config_lookup_string api


author: Jan Zeleny <jzeleny@redhat.com> - 0.9.7-3
changelog:
  - added devel files again to support fcoe-utils package
  - added kernel >= 2.6.29 to Requires, deleted dcbnl.h, since it is
    aviable in kernel 2.6.29-rc7
  - changed config dir from /etc/sysconfig/dcbd to /etc/dcbd
  - updated init script: added mandatory Short description tag,
    deleted default runlevels, which should start the script


author: Chris Leech <christopher.leech@intel.com> - 0.9.7-1
changelog:
  - Updated to 0.9.7
  - Added a private copy of dcbnl.h until kernel-headers includes it.
    Export patch is making it's way to the upstream kernel via net-2.6,
    expected in 2.6.29-rc7


author: Matthias Clasen <mclasen@redhat.com> - 3.0.1-2
changelog:
  - Add a nautilus dependency back to the main package; keep the
    -nautilus subpackage for now, in case the setting we use moves
    to gsettings-desktop-schemas (#691766)


author: Christopher Aillon <caillon@redhat.com> 2.8.0-2
changelog:
  - update-desktop-database after uninstall.
  - nautilus shouldn't try to open remote files with file-roller (#133592)


author: Rex Dieter <rdieter@fedoraproject.org> - 5.6.0-0.5
changelog:
  - (re)fix bootstrap macro
  - include qt5-qdoc/qt5-qhelpgenerator build dep deps in -doc subpkg only
  - fix whitespace


author: Helio Chissini de Castro <helio@kde.org> - 5.6.0-3
changelog:
  - Reenable examples. Some interfaces marked as examples are needed from phonon
  - Update to second rc snapshot


author: Kevin Kofler <Kevin@tigcc.ticalc.org> 5.4.0-0.4.rc
changelog:
  - disable bootstrap (reenable -doc)
  - system-clucene patch: drop -fpermissive flag
  - system-clucene patch: use toLocal8Bit instead of toStdString
  - system_clucene: BR clucene09-core-devel >= 0.9.21b-12 (-11 was broken)


author: Rex Dieter <rdieter@fedoraproject.org> - 5.4.0-0.3.rc
changelog:
  - libQt5Designer should be in a subpackage (#1156685)
  - -doc: disable(boostrap for new clucene), drop dep on main pkg


author: Rex Dieter <rdieter@fedoraproject.org> 5.1.1-2
changelog:
  - ExclusiveArch: i386 i486 i586 i686 pentium3 pentium4 athlon geode x86_64 armv3l armv4b armv4l armv4tl armv5tel armv5tejl armv6l armv7l armv7hl armv7hnl
  - epel-6 love


author: Pravin Satute <psatute AT redhat DOT com> - 2.1-1
changelog:
  - Resolves: rhbz#1284772 - Upstream new release with ttfautohint
  - Changed url to https://github.com/RedHatBrand/overpass/, https://overpassfont.org looks dead.
  - Add Light variant font.
  - Add metainfo file to show this font in gnome-software.


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 3.3.8b-37
changelog:
  - fix aliasing issue in qlocale.cpp
  - build against the system sqlite2-devel (patch from Debian)
  - BuildRequires: sqlite2-devel instead of unused sqlite-devel (SQLite 3)
  - silence compiler warning in qimage.h by adding parentheses
  - fix the include path for zlib.h in qcstring.cpp to pick up the system version


author: Kevin Kofler <Kevin@tigcc.ticalc.org> 3.3.8b-8
changelog:
  - prepare for rename to qt3 on Fedora >= 9 (not enabled yet)
  - add Provides and Obsoletes everywhere
  - update summaries and descriptions
  - remove dots at end of Summary tags
  - fix non-UTF-8 characters


author: Than Ngo <than@redhat.com> 3.3.8b-2
changelog:
  - License: GPLv2 or GPLv3
  - merged in 3.3.8b -> drop following patches:
      * qt-3.3.6-fontrendering-punjabi-209970.patch
      * qt-3.3.6-fontrendering-or_IN-209098.patch
      * qt-3.3.6-fontrendering-gu-228451.patch
      * qt-font-default-subst.diff
      * 0076-fix-qprocess.diff
      * 0082-fix-qdatetime-fromstring.diff
      * qt-x11-free-3.3.8-bz#243722-mysql.patch
      * qt3-CVE-2007-3388.patch
      * utf8-bug-qt3-CVE-2007-0242.diff
      * qt-3.3.6-bz#292941-CVE-2007-4137.patch


author: Than Ngo <than@redhat.com> - 3.3.8-9
changelog:
  - rh#309091, qt should provide %{qtdir}/plugins/styles
  - rh#276521, qt-copy patches 0079, 0080, 0082 and 0084


author: Than Ngo <than@redhat.com> - 1:3.3.8-7
changelog:
  - CVE-2007-3388 qt3 format string flaw
  - backport to fix #bz243722, bz#244148, Applications using qt-mysql crash if database is
    removed before QApplication is destroyed
  - cleanup desktop files


author: Than Ngo <than@redhat.com> - 1:3.3.8-4.fc7
changelog:
  - adjust qt-3.3.8-fontrendering-as_IN-209972.patch and
    qt-3.3.8-fontrendering-#214570.patch for qt-3.3.8


author: Than Ngo <than@redhat.com> - 1:3.3.8-3.fc7
changelog:
  - apply patches to fix
     Qt UTF-8 overlong sequence decoding vulnerability
     QPopupMenu aware of Xinerama
     a regression in QProgress::writeToStdin()


author: Than Ngo <than@redhat.com> - 1:3.3.7-2.fc7
changelog:
  - Resolves: bz#214371, bn_IN font rendering
  - Resolves: bz#217657, ml_IN issue with cursor position
  - Resolves: bz#217638, regression bug in qt
  - Resolves: bz#209974, Vowel position set properly
  - Resolves: bz#214570, Rendering is not fine for 'RA' 09B0


author: Than Ngo <than@redhat.com> 1:3.3.7-1.fc6
changelog:
  - update to 3.3.7
  - fix #209097, ml_IN font rendering
  - fix #209970, pa font rendering
  - fix #209098, or_IN font rendering
  - fix #209972, as_IN font rendering
  - fix #209975, bn_IN font rendering
  - fix #211259, te_IN font rendering
  - fix #211436, as_IN font rendering
    thanks Sachin Tawniya, LingNing Zhang for the fixes
  - move html files to devel
  - add sqlite plugin
  - fix #189012, qt settings should be readable for other


author: Than Ngo <than@redhat.com> 1:3.3.6-11
changelog:
  - apply upstream patches, fix arabic fonts issue, and
    problems with missing minimum size when richtext
    labels are used


author: Than Ngo <than@redhat.com> 1:3.3.6-7
changelog:
  - fix utf8 issue in changelog
  - fix #195410, don't strip binaries/libraries
  - fix #156572, keyReleaseEvent issue


author: Than Ngo <than@redhat.com> 1:3.3.6-1
changelog:
  - update to 3.3.6
  - adapt qt-x11-immodule-unified-qt3.3.5-20060318 to qt-3.3.6
  - remove set of fixes for the immodule patch, included in qt-x11-immodule-unified-qt3.3.5-20060318
  - remove 0051-qtoolbar_77047.patch, qt-x11-free-3.3.4-assistant_de.patch,
    qt-x11-free-3.3.5-warning.patch, included in new upstream


author: Than Ngo <than@redhat.com> 1:3.3.5-6
changelog:
  - update qt-x11-immodule-unified-qt3.3.5-20051018.diff
  - remove unneeded qt-x11-immodule-unified-qt3.3.5-20051012-build.patch


author: Than Ngo <than@redhat.com> 1:3.3.5-5
changelog:
  - update qt-x11-immodule-unified-qt3.3.5-20051012
  - disable some debug messages
  - apply patch to fix build problem with the new immodule patch


author: Than Ngo <than@redhat.com> 1:3.3.4-15
changelog:
  - add better fix for #156977, thanks to trolltech
  - apply patch to fix keyReleaseEvent problem #156572


author: Than Ngo <than@redhat.com> 1:3.3.4-5
changelog:
  - fix application crash when input methode not available (bug #140658)
  - remove .moc/.obj
  - add qt-copy patch to fix KDE #80072


author: Than Ngo <than@redhat.com> 1:3.3.4-2
changelog:
  - remove useless doc files #143949
  - fix build problem if installman is disable #146311
  - add missing html/examples/tutorial symlinks


author: Than Ngo <than@redhat.com> 1:3.3.4-1
changelog:
  - update to 3.3.4
  - adapt many patches to qt-3.3.4
  - drop qt-x11-free-3.3.0-freetype, qt-x11-free-3.3.3-qmake, qt-x11-free-3.3.1-lib64
    qt-x11-free-3.3.3-qimage, which are included in new upstream


author: Than Ngo <than@redhat.com> 1:3.3.3-9
changelog:
  - remove unused patch
  - set XIMInputStyle=On The Spot
  - require xorg-x11-devel instead XFree86-devel


author: Than Ngo <than@redhat.com> 1:3.3.2-8
changelog:
  - add fontconfig fix for qfontdatabase, #123868
  - fix some buildrequires problem, #125289
  - fix dangling symlink, #125351
  - get rid of backup files


author: Than Ngo <than@redhat.com> 1:3.3.2-5
changelog:
  - add missing qembed tool #124052, #124052
  - get rid of unused trigger
  - add qt.conf in ld.so.conf.d -> don't change ld.so.conf #124080


author: Than Ngo <than@redhat.com> 3.3.1-1
changelog:
  - add cvs backport
  - fix lib64 issue, #121052
  - fix CJK font display, bug #121017, #120542, thanks to Leon Ho
  - compress tutorial/examples


author: Than Ngo <than@redhat.com> 3.3.1-0.6
changelog:
  - add 0034-qclipboard_recursion_fix.patch from CVS, #118368
  - add better qt-x11-free-3.3.1-fontdatabase.patch


author: Than Ngo <than@redhat.com> 3.3.0-0.3
changelog:
  - enable IPv6 support
  - use dlopen, instead of linking with OpenGL libraries directly
  - don't install backup files


author: Than Ngo <than@redhat.com> 1:3.2.3-0.2
changelog:
  - Added missing prl files, (report from trolltech)
  - Fixed description
  - include requires XFree86-devel on qt-devel


author: Than Ngo <than@redhat.com> 1:3.2.2-0.2
changelog:
  - add font alias patch file, thanks to Leon Ho
  - clean up monospace.patch from Leon Ho
  - remove some unneeded patch files


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - Change qmlined.h to not include an attic header that is also not shipped
    with Red Hat Linux. This also fixes building unixODBC, that includes this
    header (apparently also without needing it).


author: Than Ngo <than@redhat.com> 3.1.1-3
changelog:
  - add monospace patch file from Leon Ho (bug #79949)
  - add small patch file from Sysoltsev Slawa (bug #79731)


author: Than Ngo <than@redhat.com> 3.1.0-1
changelog:
  - update to 3.1.0
  - adjust some patch files for 3.1.0
  - clean up specfile
  - remove some Xft2 patch files, which are now in 3.1.0
  - add qwidget_x11.cpp.diff from Trolltech
  - install qt in %{_libdir}/qt-3.1 (bug #77706)
  - don't use rpath
  - enable large file support
  - use system Xinerama
  - remove unneeded cups patch file
  - fix to build against new XFree86


author: Than Ngo <than@redhat.com> 3.0.5-19
changelog:
  - examples misconfigured (bug #76083)
  - don't include pkg-config (bug #74621)
  - fix build problem with new XFree86


author: Than Ngo <than@redhat.com> 3.0.5-17
changelog:
  - Fixed rpath issue (bug #69692, #69575)
  - Removed dlopen patch
  - Added monospace alias patch from Leon Ho (bug #72811)
  - Added man pages


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.5-14
changelog:
  - Don't link to libstdc++, it isn't used
  - Work around s390 compiler bug (fpic/fPIC coexistance)
  - Do away with the "Feature Bluecurve already defined" warning message
  - Remove qmake cache files from the package


author: Than Ngo <than@redhat.com> 3.0.5-13
changelog:
  - Added fix to use VT100 graphic characters (bug #71364)
  - Added fontdatabase fix from llch@redhat.com (bug #68353)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.5-11
changelog:
  - Move qtconfig from qt-devel to qt, it's generally useful
  - Use -fno-use-cxa-atexit
  - Some tweaks to allow building Qt/Embedded with the same spec file
  - Apply the GB18030 patch even if xft2 isn't set


author: Than Ngo <than@redhat.com> 3.0.4-10
changelog:
  - add missing Buildprequires desktop-file-utils
  - add patches for GB18030 (llch@redhat.com) bug #68430


author: Jakub Jelinek <jakub@redhat.com> 3.0.4-8
changelog:
  - compile libXinerama.a with -fpic in Qt until XFree86 is fixed
  - make %xft2 work even if old Xft headers aren't installed


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.4-6
changelog:
  - Re-enable Xft2 now that fontconfig is fixed
  - Require a version of fontconfig that works
  - Use -fPIC rather than -fpic on alpha


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.3-10
changelog:
  - Tweaks to allow parallel installations of Qt 3.x (gcc 2.96) and Qt 3.x
    (gcc 3.1)
  - Fix up debug spewage at Qt designer startup


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.3-8
changelog:
  - Get rid of non-threaded version, dlopen()'ing threaded code
    (like plugins) from non-threaded code is dangerous
  - Add some fixes from qt-copy, fixing the ksplash crash some people
    have noticed on a first login
  - Add translation fixes from CVS
  - Patch example .pro files to build outside the Qt source tree (#63023)
  - Fix various bugs


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.3-0.cvs20020314.1
changelog:
  - Update to 3.0.3-pre, required for KDE3
  - force -fPIC usage
  - Remove conflict with qt2 < 2.3.2-1, the new qt2 2.3.1 is fixed and qt 2.3.2
    is broken
  - Ship the qmake config files (so qmake works for building any 3rd party stuff,
    e.g. aethera)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.2-0.cvs20020114.1
changelog:
  - Build styles directly into the main library for now, there's too much broken
    code out there depending on this ATM.


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.1-2
changelog:
  - Fix up settings search path
  - Add default qtrc allowing to use KDE 3.x Qt plugins
  - Make sure QLibrary uses RTLD_GLOBAL when dlopen()ing libraries


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.1-0.cvs20011210.1
changelog:
  - Update to current (needed by KDE 3.x)
  - Rebuild with current libstdc++
  - Temporarily disable building on alpha
  - Fix build with PostgreSQL 7.2


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-4
changelog:
  - Give designer, uic, moc, etc. their real names - the qt2 versions
    have been renamed in qt2-2.3.2-1.
    Conflict with qt2 < 2.3.2-1.


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-3
changelog:
  - Add symlink /usr/lib/qt-3.0.0 -> /usr/lib/qt3 and set QTDIR to the
    symlink, allowing to update to 3.0.1 without breaking rpath'ed binaries


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-1
changelog:
  - 3.0.0 final
  - fix some minor specfile bugs
  - Modularize some more (image format plugins)
  - Build codecs


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-0.beta4.1
changelog:
  - beta4
  - build the Motif style directly into Qt rather than as a plugin - Qt should
    always have at least one style...
  - replace the designer3 symlink with a shell script that sets QTDIR correctly
    before launching designer
  - Add desktop file for designer


author: Tim Powers <timp@redhat.com> 3.0.0-0.beta3.4
changelog:
  - explicitly include qm2ts, qmake, qtconfig in the devel package file list to avoid dangling symlinks


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add another ugly workaround for build system problems, this should finally
    get rid of the dangling symlinks


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-0.beta1.2
changelog:
  - Fix up QSQL Postgres classes for Postgres 7.1.x
  - Fix various bugs:
    - QtMultilineEdit and QtTableView should actually compile
    - Link libqsqlpsql with libpq
    - Don't link the base library with libmysqlclient, linking the MySQL
      module with it is sufficient
  - Add missing const qualifier
  - move the SQL drivers to separate packages to avoid dependencies
  - build and install designer plugins - converting glade files to Qt is fun. ;)
  - handle RPM_OPT_FLAGS


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.3.0-5
changelog:
  - Make sure uic and designer use the libqui from the source tree, not
    a previously installed one.
    Linking uic-x11 against libqui-embedded is definitely not a feature. ;)
  - The qclipboard fix is needed for qt-x11 only, don't apply it if we're
    building qt-embedded


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Don't segfault when running Qt/Embedded applications as root
  - Improve the Qt/Embedded sparc patch so we don't need the specfile hacks
    anymore
  - Fix a bug in QPrintDialog (causing KDE Bug #18608)


author: Than Ngo <than@redhat.com>
changelog:
  - call ldconfig for updating (Bug #19687)
  - added patch from Trolltech, thanks to Rainer <rms@trolltech.com>


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add missing msg2qm, msgmerge, qconfig tools (Bug #18997), introduced
    by broken Makefiles in base
  - fix up %install so it works both with old-style and new-style fileutils
    (fileutils <= 4.0z don't know about -L)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - fix -devel
  - update to the new version of 2.2.1 on trolltech.com; the initial tarball
    contained broken docs


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Move Qt designer to a different source RPM to get rid of a
    circular dependency (kdelibs2->qt, qt->kdelibs2)
  - Enable MNG support
  - Don't compile (just include) examples and tutorials
  - move the static libraries to a separate package (qt-static).
    They're HUGE, and most people won't ever need them.
  - clean up spec file
  - fix up dependencies (-devel requires base, -static requires devel,
    Xt requires base)
  - add BuildRequires line


author: Than Ngo <than@redhat.com>
changelog:
  - update release 2.2.0
  - changed copyright to GPL
  - added missing static libraries
  - made symbolic link for designer to load the help files correct
  - made designer and designer-kde2 as sub packages
  - added missing templates for designer
  - remove jakub patch, since the release 2.2.0 already 
    contains this patch.
  - fixed qt again to compile with gcc-2.96
  - use make -j for building


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - move man pages to a more reasonable place (this fixes Bug #14126)
  - exclude ia64 for now (compiler problems!!!)


author: Harald Hoyer <harald@redhat.de>
changelog:
  - made patch smaller and binary compatible when recompiled with 6.2
  - modified connect and moc to cope with the new g++ class layout


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - beta1
  - get rid of qt-ImageIO, the functionality is now in the main Qt library
  - remove qt-Network, the functionality is now in the main Qt library
  - add changes-2.1.0 to %doc


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - new snapshot
  - -GL requires libGL.so.1 instead of Mesa (might as well be glxMesa
    or some commercial OpenGL)
  - -GL BuildPrereqs /usr/X11R6/include/GL/gl.h instead of Mesa-devel
    (might as well be glxMesa or some commercial OpenGL)


author: Bernhard Rosenkraenzer <bero@redhat.de>
changelog:
  - current CVS snapshot
  - fix compilation with gcc 2.95.x
  - use install -c rather than just install to make BSD install happy


author: Preston Brown <pbrown@redhat.com>
changelog:
  - substitution in tutorial and examples so that dependencies are correct and
    they can be successfully rebuilt.
  - switched to completely using QTDIR.  trying to coexist with links into
    /usr/{include,lib} and still compile with qt 1.x is very hard for
    configure scripts to cope with.


author: Paul Howarth <paul@city-fan.org> - 0.008-12
changelog:
  - Never BR: perl(Test::Version) for EL builds as perl(version) is too old
    prior to EL-7 and this package is included in RHEL ≥ 7 but Test::Version
    is only in EPEL


author: Paul Howarth <paul@city-fan.org> - 0.008-7
changelog:
  - Run the extra tests in a separate test run, and only when not bootstrapping
  - Don't BR: perl(Test::Spelling) with RHEL ≥ 7 as we don't have the other
    dependencies needed do the spell check test


author: Marcela Mašláňová <mmaslano@redhat.com> - 0.008-2
changelog:
  - Don't BR: Pod::Wordlist::hanekomu for RHEL-7+ builds; RHEL package cannot
    have buildreq from EPEL
  - Add missing Data::Dumper dependency


author: Paul Howarth <paul@city-fan.org> - 0.008-1
changelog:
  - Update to 0.008:
    - Generated from ADAMK/YAML-Tiny-1.51.tar.gz
    - Updated from YAML-Tiny to fix compatibility with older Scalar::Util
  - Drop upstreamed patch for old Scalar::Util versions
  - Don't need to remove empty directories from the buildroot


author: Paul Howarth <paul@city-fan.org> - 0.006-1
changelog:
  - Update to 0.006:
    - Set back configure_requires prerequisite for ExtUtils::MakeMaker
      from 6.30 to 6.17
  - BR: perl(Test::Requires)
  - BR: perl(Test::Spelling), perl(Pod::Wordlist::hanekomu) and aspell-en to
    enable the spell checker test
  - Drop patch for building with old ExtUtils::MakeMaker versions, no longer
    needed
  - Drop support for soon-to-be-EOL RHEL-4:
    - Drop %defattr, redundant since rpm 4.4
  - Update patch for building with Test::More < 0.88


author: Paul Howarth <paul@city-fan.org> - 0.005-1
changelog:
  - Update to 0.005:
    - Fix documentation to clarify that users are responsible for UTF-8
      encoding/decoding


author: Paul Howarth <paul@city-fan.org> - 0.004-1
changelog:
  - Update to 0.004:
    - Generated from ADAMK/YAML-Tiny-1.50.tar.gz
  - BR: perl(Test::Version) for additional test coverage
  - Update patch for building with ExtUtils::MakeMaker < 6.30
  - Add patch to support building with Test::More < 0.88
  - Add patch to fix operation with Scalar::Util < 1.18


author: Ville Skyttä <ville.skytta at iki.fi> - 2.11-2
changelog:
  - Sync with latest rpmdevtools perl spec template.
  - BuildRequire perl(ExtUtils::MakeMaker).
  - Convert docs to UTF-8.


author: Peter Hutterer <peter.hutterer@redhat.com> 1.0.2-1
changelog:
  - libXp 1.0.2. Drags in a bunch of general cleanup, code changes are quite
    limited and CVE-2013-2062 (#960362)


author: parag <paragn@fedoraproject.org> - 1.0.0-10
changelog:
  - Merge-Review #226082
  - Removed XFree86-libs, xorg-x11-libs XFree86-devel, xorg-x11-devel as Obsoletes
  - Removed xorg-x11-deprecated-libs xorg-x11-deprecated-libs-devel as Obsoletes


author: Soren Sandmann <sandmann@redhat.com> - 1.0.0-6
changelog:
  - Add the proto files directly instead of attempting to build a separate
    tarball. Also remove last traces of printproto-1.0.3.tar.gz


author: Soren Sandmann <sandmann@redhat.com> - 1.0.0-6
changelog:
  - Add patch to not check for printproto.pc. (Since it's part of this
    package now, it isn't installed at the time libXp is configured).


author: Soren Sandmann <sandmann@redhat.com> - 1.0.0-5
changelog:
  - Moved Print.h, Printstr.h and printproto.pc into the devel package here
    (they used to be in xorg-x11-proto-devel).


author: Mike A. Harris <mharris@redhat.com> 1.0.0-4
changelog:
  - Renamed libXp_deprecated rpm macro to "with_devel" to avoid confusion.  This
    library is still deprecated, we just decided to remove the word "deprecated"
    from the package name for library naming consistency.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-3
changelog:
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Added "Requires: xorg-x11-proto-devel" to devel for xp.pc
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXp to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-3
changelog:
  - Added "Obsoletes: xorg-x11-deprecated-libs" to runtime package, and
    "Obsoletes: xorg-x11-deprecated-libs-devel" to devel package.


author: Jerry Snitselaar <jsnitsel@redhat.com> - 1.0-3
changelog:
  - Add systemd unit for resourcemgr
  - Add utils subpackage
  - Add Makefile.am patch to install test programs
  - Add patch to swap out AX_PTHREAD for different check
  - Increase release version to 3
  resolves: rhbz#1275027 - Add TPM 2.0 System API (SAPI) library


author: Sun Yunying <yunying.sun@intel.com> - 1.0-2
changelog:
  - Remove global macro pkg_version to avoid duplicate of version
  - Use ExclusiveArch instead of ExcludeArch
  - Use less wildcard in %files section to be more specific
  - Add trailing slash at end of added directory in %file section
  - Remove autoconf/automake/pkgconfig(cmocka) from BuildRequires
  - Increase release version to 2


author: Chris Lumens <clumens@redhat.com> - 2.9.2-1
changelog:
  - Transifex has moved, so update the config. (clumens)
  - Remove the Japanese-specific man page. (clumens)
  - Update the system-config-kickstart man page to something useful (#948447). (clumens)
  - Fix a typo. (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.9.1-1
changelog:
  - Fix an error reading the timezone in generate mode (#916346, #924764). (clumens)
  - Remove the documentation (#915737). (clumens)
  - Display hidden groups in the package selection UI (#915029). (clumens)
  - Default to SHA512, same as anaconda (#915013). (clumens)
  - Add the system-config-keyboard dep back in (#909355). (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.9.0-1
changelog:
  - Fix another problem updating the .po file.
  - Remove support for python-meh.  It requires gtk3.
  - Add the old anaconda GroupSelector.py to system-config-kickstart (#859928).
  - It helps to import the exceptions I want to catch (#893282).
  - Do @VERSION@ substitution on the main program, too (#866563).


author: Chris Lumens <clumens@redhat.com> - 2.8.10-1
changelog:
  - Update glade file to fix translation building. (clumens)
  - Fix various problems when packaging up translations. (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.8.9-1
changelog:
  - Put /usr/share/system-config-kickstart at the front of the path (#820748). (clumens)
  - Fix "make local" to not pack up .git/ as well. (clumens)
  - Update Makefiles to work with new translation system. (clumens)
  - BuildRequires transifex-client. (clumens)
  - Ignore po/*.po files. (clumens)
  - Remove translation files. (clumens)
  - Fix translation files so "msgfmt -c " passes and they'll upload to transifex. (clumens)
  - Add transifex configuration file. (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.8.8-1
changelog:
  - Fix an importing bug caused by the previous patch. (clumens)
  - Don't traceback when starting up outside of X (#676338). (clumens)
  - Convert spec to UTF-8. (notting)


author: Chris Lumens <clumens@redhat.com> - 2.8.7-1
changelog:
  - pykickstart raises KickstartError instead of IOError now. (clumens)
  - Clear the partition store whenever a file is loaded (#610740). (clumens)
  - Remove the key entry as well, since that command no longer exists. (clumens)
  - Remove the deprecated interactive mode. (clumens)
  - anaconda has changed all around, so fix the GroupSelector import. (clumens)
  - Fix --help argument handling (#621379). (clumens)
  - Update translation files (#617075). (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.8.6-1
changelog:
  - Don't traceback when loading the Preview dialog a second time (#593259). (clumens)
  - Don't install the icon to /usr/share/system-config-kickstart too (#594361). (clumens)
  - Update translations.


author: Chris Lumens <clumens@redhat.com> - 2.8.4-1
changelog:
  - Don't overwrite tsInfo with a new instance (#541052). (clumens)
  - Correct rpmlint errors found with the .spec file. (clumens)
  - Use OptionParser instead of the old getopt module (#553045). (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.8.3-1
changelog:
  - Add ext4, make it the default (#544079).
  - Add support for authconfig --enablefingerprint (#539371).
  - Fix an import error (#530739, nelsoninva AT gmail.com).
  - Update lots of translations.


author: Chris Lumens <clumens@redhat.com> - 2.8.1-1
changelog:
  - Change the skipx blurb to make more sense (#493835).
  - Update to using python-meh for exception handling instead of rhpl.
  - Do VERSION substitution on all files.


author: Chris Lumens <clumens@redhat.com> - 2.8.0-1
changelog:
  - Allow specifying anything for a network device name, not just ethX (#508089).
  - Don't traceback when opening files with null bytes (#508092).
  - Make the OK button on some dialogs insensitive until changes happen (#493887).
  - Don't traceback if the filename entry is blank (#500409).
  - Lots more UI style/layout updates (#493842, #493857, rrakus).
  - Don't traceback if given an invalid language or timezone (#487390).
  - Update to glade3 (#495754, rrakus).
  - Add a progress window when saving or previewing files (#493879, rrakus).
  - Use the standard about/license dialog (rrakus, #493926).
  - Center dialogs on the parent (rrakus, #493823).


author: Chris Lumens <clumens@redhat.com> - 2.7.22-1
changelog:
  - Use dataList().append when adding partitions and network devices (#492100).
  - Update translation files (#490018). (clumens)
  - Lots of translation file udpates.


author: Chris Lumens <clumens@redhat.com> - 2.7.21-1
changelog:
  - Add "make bumpver" target from pykickstart.
  - Translate spaces in timezones to underscores when reading and writing (#475129).


author: Chris Lumens <clumens@redhat.com> 2.7.20-1
changelog:
  - Don't make the open dialog tiny.
  - Fix a traceback caused by methods moving out of GroupSelector.py in anaconda.
  - Don't remove the byte-compiled python files from a scriptlet.


author: Chris Lumens <clumens@redhat.com> 2.7.17-1
changelog:
  - Support --display= (#450431).
  - No longer use rhpl for translations.
  - Sort keyboard list by descriptive name, not by console map.
  - Remove most of the xconfig and monitor command support.
  - Use s-c-date's timezone list since that's what anaconda does (#445195).


author: Chris Lumens <clumens@redhat.com> 2.7.15-1
changelog:
  - Offer the same passalgo options that authconfig now does (#173867).
  - Don't traceback if saving doesn't work (#436406).
  - When the Cancel button is pressed, quit (#436406).
  - Prompt for a disk/part when RAID is selected (#432914).
  - Fix another typo in ldaploadcacert handling.
  - If the kickstart file cannot be opened, display an error (#431950).


author: Chris Lumens <clumens@redhat.com> 2.7.14-1
changelog:
  - Don't destroy the save dialog when it's closed.
  - If the key checkbutton is not active, remove the key setting (#226718).
  - Fix typo in LDAP authconfig parameter (#239817).
  - Use F1 as the help shortcut (#429959).
  - Translation updates (#429611).
  - More error handling when yum fails to init (#426447).
  - Update documentation license (#419071, kwade).


author: Chris Lumens <clumens@redhat.com> 2.7.13-1
changelog:
  - Fix a traceback when importing yum (#337161).
  - Remove obsolete translation (#332501).
  - Rework bootloader UI to make it easier to add other arches.


author: Chris Lumens <clumens@redhat.com> 2.7.12-1
changelog:
  - Rework network device dialog to not use four input boxes for each address.
  - Don't require a gateway or nameserver address (#215191).


author: Chris Lumens <clumens@redhat.com> 2.7.5-1
changelog:
  - Default to installing instead of upgrading.
  - Set a default SELinux setting when started up.
  - Don't write out remove lines for packages not available on the
    installation architecture.


author: Chris Lumens <clumens@redhat.com> 2.7.4-1
changelog:
  - Fix loading packages section (#232285).
  - Fix preview/save on upgrade (#232282).
  - Add UI for authconfig's --ldaploadcert option (#232664).


author: Chris Lumens <clumens@redhat.com> 2.7.2-1
changelog:
  - Add package-level selection and removal (#222592).
  - Add UI for the key command (#226718).
  - Fix iter handling on the partition screen for auto partitions (#225087).


author: Chris Lumens <clumens@redhat.com> 2.7.1-1
changelog:
  - Update to use new pykickstart.
  - Don't traceback if no monitor or x driver is selected.
  - Handle pykickstart exceptions by displaying an error dialog.


author: Chris Lumens <clumens@redhat.com> 2.7.0-1
changelog:
  - Use system-config-securitylevel to provide the firewall page.
  - Speed up startup and shutdown.
  - If package selection is disabled, don't forget whatever was in the
    original kickstart file (#217165).


author: Chris Lumens <clumens@redhat.com> 2.6.18-1
changelog:
  - Don't require a root password (#215190).
  - Disable package screen if yum couldn't download (#216439).


author: Chris Lumens <clumens@redhat.com> 2.6.15-1
changelog:
  - Don't need to be root to run system-config-kickstart (patch from
    Panu Matilainen <Panu.Matilainen@nokia.com>, #211998).


author: Chris Lumens <clumens@redhat.com> 2.6.14-1
changelog:
  - Use updated translations (#210728).
  - Update documentation (#210863).
  - Don't enable yum plugins.
  - Disable popup menu on the package selection screen.


author: Chris Lumens <clumens@redhat.com> 2.6.10-1
changelog:
  - Fix unencrypted root password traceback (#190487).
  - Try harder to get a base repo enabled (#190508).


author: Chris Lumens <clumens@redhat.com> 2.6.4-1
changelog:
  - Convert package selection to using pirut (#178759).
  - Partitioning screen fixes for cciss.
  - Use consolehelper.


author: Chris Lumens <clumens@redhat.com> 2.5.24-1
changelog:
  - Remove mouse and langsupport.  These two options have been removed from
    kickstart so we shouldn't be generating invalid files.
  - Fail if we read a line we don't understand instead of being silent.
  - Deal with drivers instead of cards due to kudzu changes.


author: Chris Lumens <clumens@redhat.com> - 2.5.19-1
changelog:
  - Fixed a segfault in pygtk on the partitioning screen.
  - Fixed RAID editing screen so the config values don't change if you
    repeatedly edit a RAID volume.


author: Chris Lumens <clumens@redhat.com> - 2.5.18-1
changelog:
  - Get package group lists and their translations out of the comps.xml file
    instead of reying on a built-in (and out of date) list.
  - Added an "Install Everything" button (#134679).


author: Chris Lumens <clumens@redhat.com> - 2.5.16-1
changelog:
  - Fix display in indic locale (#138310) and (#138601)
  - Monitor order (#127477)
  - Translation of RAID message (#127687)
  - Unencrypted root passwords (#134678)
  - Broken nfs line parsing (#134681)


author: Brent Fox <bfox@redhat.com> 2.5.11-2
changelog:
  - handle missing mouse line (bug #124341)
  - use N_ instead of _ in packages.py (bug #124144)
  - remove code for dead firewall widgets (bug #124342)


author: Brent Fox <bfox@redhat.com> 2.3.4-2
changelog:
  - rebuild for completeness
  - added some new system profiling code, but it's not exposed in the UI yet


author: Brent Fox <bfox@redhat.com> 2.3.4-1
changelog:
  - Handle opening existing kickstart files
  - Handle multiple ethernet interfaces
  - Don't require rootpassword on upgrades


author: Brent Fox <bfox@redhat.com> 2.3.2-16
changelog:
  - Don't write out --emulthree if No Mouse is selected
  - Fix gtk.glade.bindtextdomain so that the glade screens pull in translations


author: Tammy Fox <tfox@redhat.com> 2.3.2-2
changelog:
  - Updated list of langs
  - Reimplemented keyboard list to use list from rhpl
  - Fix for iter_next change


author: Brent Fox <bfox@redhat.com>
changelog:
  - completed the port to gtk2
  - Fixed bug 65835
  - Fixed bug 66815
  - Fixed bug 64453 (with help from menthos@menthos.com)


author: Tammy Fox <tfox@redhat.com>
changelog:
  - Added optional ftp username and password
  - Added preview menu item
  - Added bootloader --upgrade
  - Added swap --recommended
  - Added %packages -- resolvedeps and %packages --ignoredeps


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added po directory
  - added grub password and initialize the disk label
  - added help manual and function to display it


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added emulate three buttons and probe for mouse options
  - added preview configuration window
  - modified basic.py to use dictionaries to store combo box selections


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added scrollwindow around partition information
  - made all widgets except partition scrollwindow unexpandable so that when the main window is resized only the partition list gets bigger
  - increased release number


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added file dialog box
  - cleaned up code
  - renamed okButton to saveButton in ksconfig.py
  - renamed Cancel button to Exit in interface
  - added /boot to default partition list
  - added menu icon


author: Jon Ciesla <limb@jcomserv.net> 20090104-6
changelog:
  - Converted last define to global.
  - Dropped -common group declaration.
  - Dropped free from package names.
  - Dropped unneccessary requires and obsoletes.
  - Dropped fontdir from -common.
  - Fixed conf install and names.


author: Jon Ciesla <limb@jcomserv.net> 20090104-4
changelog:
  - Changed define to global.
  - Dropped main package, created compat package.
  - Dropped freefont-ttf Obsoletes.
  - Fixed subpackage requires.
  - Dropped subpackage Groups.
  - Fixed font_pkg syntax.
  - Buildrequire fontforge.
  - Added fontconfig rules.
  - Minor spec order corrections.


author: Jon Ciesla <limb@jcomserv.net> 20090104-3
changelog:
  - For BZ 477336:
  - Renamed from freefont to gnu-free-fonts.
  - Build from sfd now.
  - Removed Requires for fontconfig.
  - Drop old Provides.


author: Michal Ruprich <mruprich@redhat.com> - 1.5.0-12
changelog:
  - Removed clean section
  - Resolves: #1589860 - Update GeoIP legacy databases
  - Resolves: #1409060 -  Missing symlink at the GeoIP-update package


author: Jan Safranek <jsafrane@redhat.com> - 1.5.0-10
changelog:
  - Added base IPv6 database to GeoIP package
  - Added GeoIP-data subpackage with all other databases (#1201857)


author: Jan Safranek <jsafrane@redhat.com> - 1.5.0-7
changelog:
  - Don't download the database in %post (#1029807)
  - Don't download GeoLiteASNum as it's no longer provided.


author: Paul Howarth <paul@city-fan.org> - 1.5.0-5
changelog:
  - Make GeoIP.dat -> GeoIP-initial.dat symlink in %install, not %post,
    and don't %ghost it
  - Run geoipupdate silently in %post and cron job
  - Create empty database files for %ghost to work with old rpm versions
  - Don't try to use noarch subpackages on old rpm versions
  - Update %description to mention database updates
  - Drop outdated README.Fedora


author: Philip Prindeville <philipp@fedoraproject.org> - 1.5.0-1
changelog:
  - Version bump to 1.5.0
  - Have GeoIP.dat be a symlink to the real data, and install the canned
    GeoIP.dat as GeoIP-initial.dat
  - Change config as per Boris' instructions to use 'lite' databases which are
    regularly updated.
  - Add pkgconfig (.pc) file into devel subpackage
  - Add cron support for refreshing the lite databases and make a separate
    subpackage.


author: Paul Howarth <paul@city-fan.org> - 1.4.8-4
changelog:
  - libGeoIPUpdate and geoipupdate (which is linked against it) are GPL-licensed
    rather than LGPL-licensed (#840896)
  - Don't package generic INSTALL file (#661625)
  - Kill bogus rpaths on x86_64
  - Hardcode library sonames in %files list to avoid nasty surprises in the
    future
  - Drop %defattr, redundant since rpm 4.4
  - Recode docs as UTF-8
  - Don't use macros for commands
  - Use tabs


author: Michael Fleming <mfleming+rpm@enlartenment.com> 1.4.1-1
changelog:
  - New upstream release
  - Add fetch-geoipdata* scripts to pull free databases automatically if
    desired (bz #198137)
  - README.fedora added to briefly explain above.


